2019 Santa Cruz 5010 W/ new White Decals

Decals fit almost perfectly and easy to apply. I cut almost each letter out and applied them individually. I highly recommend them.

Stuart

Close but not cigar

Fit:

Runs small

Bought the black SC decals for my 2019 matte black/burnt orange Hightower. The plan was to black it out. Tried and tried but was not able to completely match/cover the burnt orange branding. I found that the decals are about 1/16" off on spacing/covering the factory branding. My recommendation to SC is to make the decals slightly wider to cover. I kept the decals on my bike for now but definitely could be a nicer fit.

Jason D.

Close Enough

Almost perfect fit to cover the existing letters, close enough. Looks great!

JJ Parker

Close Enough

Almost perfect fit to cover the existing letters, close enough. Looks great!

JJ Parker

Will these work on a 2019 Chameleon?

Ramiro

AWESOME! Great Way to Customize.

Familiarity:

I've put it through the wringer

Decals are a perfect match to cover dealer installed downtube decals. Applied to a 2020 Tallboy, Stormbringer Purple. No cutting or sizing needed though I do suggest trimming the excess so that the decals align. Clean application site with alcohol first. Allow to alcohol to vaporize. Alcohol is a VOC so it will evaporate quickly. Make sure that you have good lighting. Lighting is KEY!!! I also suggest covering the new decals with 8mm 3M paint protector.

Bryan K.

Santa Cruz decal install Do I just place the decal like a sticker over the original santa Cruz decal or is there another clear layer that peels off? Also I needed to install an invisiframe protection kit.. Does the decal go on before or after?

Luong Ly

Great Decals!

Familiarity:

I've used it once or twice and have initial impressions

I went with the orange for my 2018 Tallboy. It is a fluorescent orange not a burnt orange like it appears in the product picture. Take your time applying these decals and they will cover the factory letters.

landon S.

Matchy-Matchy

Familiarity:

I've used it once or twice and have initial impressions

Di-cut decals are of good quality. Just a little small and had to apply individually. Crack a beer and go slow. All-in-all, a pretty cool little add-on.

#1 Headband

Customize your bike!

Familiarity:

I've put it through the wringer

These stickers are great for adding a little flare to your Santa Cruz! The sticker quality is great. My only complaint is that they don't line up 100% perfect but it's really close. You can only tell if you look really close at it - you may see a little sliver of the old color poking through. I would recommend taking a little extra time to line it up as best you can.

Jeff Collier

DOPE

Familiarity:

I've put it through the wringer

Show off your Santa Cruz love with these bad boys. Love the color options as we've used these to personalize a few different colored frames we have. Easy to put on and easy to remove when needed, but they stay stuck even when you're tearing up the trails.

taylor

Spice Up Your Frame

Familiarity:

I've used it several times

These decals make it easy to add a little customization and protection to your Santa Cruz frame. The pack of 3 decals makes sure you'll have at least an extra on hand if you accidentally slap it in the wrong spot. They're easy to apply, but take your time and line it up for perfect results.

Max Pauer

Great way to personalize

This is a great way to add some flair to your Santa Cruz. In Park City, Santa Cruz bikes are just as popular as Subarus. If you are looking for a way to personalize your bike, these stickers are the way. Sure, you can change your grips but I tend to stay with black for a more understated look. These stickers add flair while keeping your bike looking stock/factory.

Evan

Upgrade

Familiarity:

I've put it through the wringer

Stand out on the trails with these decals. My only issue is that the decals are about .01% smaller than the painted logo, so you may run into some color popping through.

Andrew Meehan

Too small

Familiarity:

I've used it once or twice and have initial impressions

I was real excited too customize my bike but these definitely did not fit, quite a bit too small so just stuck with the og decals for now. Kinda bummed

Andrew Oaks

CUSTOM

Familiarity:

I've put it through the wringer

Rad way to make your bike pop and match other accents of your bike with your favorite color. Lettering looks professional from far away. Up close there are very small gaps of the original lettering color poking through.

Charlie Lewis

Mixed feelings

Yes, this decal set will set you apart from your friends, but the stickers seem to just be a little small. I had an extremely hard time covering the letter properly and would have loved if the stickers were just a tiny bit bigger. They’re also hard to put on, but Santa Cruz offers an extra set just in case you screw up. It’s also expensive for something so silly.

Braden Bentson

Sizing Didn't Match

Decals didn't line up with the logos on my 17/18 Nomad A, it appears that the lettering was closer together on the stickers, which left the painted logo visible on both ends. You could likely cut the letters apart and apply them individually.

Barrett Cox

no repainting necessary

Familiarity:

I've used it once or twice and have initial impressions

when you spend an arm and a leg on your super nice mountain bike why not set it apart from everyone elses really nice expensive mountain bike.

Evan Grott

easy custom

Familiarity:

I've used it several times

You want to set your Santa Cruz stand out just add these and you can create a whole new look for your bike. Tricky to line up but its only noticable to anyone looking for it. Very good quality.

Steve O