- Options
- Detail Images
Item # SID0048
Item # SID0048Protect your investment, and your butt.
One very nice aspect of Sidi shoes is that they are designed with longevity in mind. Of course, their choice of materials in the uppers of their cycling shoes is always top-notch. And as a complement, the heel pads on the soles of the shoes are replaceable should they get worn down. They're inexpensive and easily replaced. Save your soles!
Sidi's stock heel pads are tough enough. But not unlike your cleats, excessive walking in your cycling shoes can eventually takes its toll on them. There are three different replacement heel pads available. The Millenium 2, Millenium 3 and the Carbon Composite sole, such as the '09 Genius 5.5 or the '09 Genius 5 Pro. You'll look for a rivet on the sole of your shoe and a corresponding notch in the heel pad. One set comes with 2 pads and 2 screws.
Note: We are currently out of stock on the Millenium 3 and Carbon Composite heel pad replacements.
- Polyurethane rubber heel pads
- 3 replacement options available: the Millenium 2, Millenium 3 and the Carbon Composite sole
- Includes two replacement pads and two screws
View more Shoe Replacement Parts
Reviews & Community
REVIEWS
JWCKeeping it simple
- Familiarity: I've used it several times
- Fit: True to size
Inexpensive parts that help prolong the life of the shoe. It's that simple.
Casey K.Nice fresh heel pads!
- Familiarity: I've put it through the wringer
- Fit: True to size
While doing maintenance on my Sidi's, I noticed my pads were quite worn. Ordered a couple pairs of these. Received them super quick. Installed in a matter of a minute or two. Ah - fresh heel pads. I had to trim off the little plastic spike, but other than that, these were good to go right out of the bag. Highly recommend these for your premium Sidi shoes!
Will S.EmployeeRevived my 10-year Sidis
My favorite road shoes are a 10-year old pair of Sidi Genius that I thought I was going to have to retire this year. But I just changed the heel pad and now feel good continue to clomp around in them for a while longer.
It was super easy to swap out -- just unscrew an allen bolt and rescrew in the new pad.
johngchristGearheadim a heel dragger
and these are awesome because I don't have to replace my shoes and have some what more confidence walking around in my Sidis
jos101551035Height:5'9"Weight:160lbsReally Good
- Fit: True to size
Really good quality, easy to replace + the product arrived just on time
Ron O.Heel pads - okay
- Fit: True to size
What's there to say about replacement heel pads?
Warren S.Replacement heels
- Familiarity: I've used it several times
- Fit: True to size
I have a pair of Genius 5 shoes that I've had for what must be almost 10 years! They're in great condition so I'm not willing to replace them just yet which says something about the quality of Sidi shoes!
So, I had to replace the heels which had worn out and looking at Competitive Cyclist, I found some replacement heels, though in the spec, it didn't list (or I couldn't find!) my model listed, only the more recent Sidi ones. (They probably don't think anyone still has such an old shoe!)
I took a gamble and ordered a pair and they appeared very quickly, so I couldn't wait to get them fitted. What I found was that although they are the same shape as the old ones, the new ones have a plastic locating pin as well as the screw to hold it in place. My Genius 5's only have the screw, so they wouldn't fit! That was easily solved by cutting off the plastic pin with some wire cutters, the heel now fitted perfectly and my shoes are like new again!
Jim CorriereHeight:6'2"Weight:242lbsHeel cups
- Familiarity: I've put it through the wringer
- Fit: True to size
- Size Bought: regular
Heel cups are easy to install. The screw tends to loosen quickly; check often! Also, the rubber on these cups wears out quickly and the cups need to be replaced often.
Carolyn G J.Sidi rubber heel pads
- Familiarity: I've put it through the wringer
- Fit: True to size
my husband likes the product.
Teresita A.Great price!
- Familiarity: I've put it through the wringer
- Fit: True to size
Competitive cyclist has a great price on these. Did the trick and easy to install.
Jim CorriereHeight:6'2"Weight:240lbsHeel caps
- Familiarity: I've put it through the wringer
- Fit: True to size
- Size Bought: regular
The rubber on these caps wear out quickly. Additionally, the tiny screw that is used to attach the caps to the shoes can be worn down quickly and if so, you're in a world of hurt unscrewing it! Pay attention to the wear of that screw and replace these heel caps often!
Dennis B.Fits older shoes too
- Familiarity: I've put it through the wringer
These fit my older shoes and gave them new life. Shoes are about 5 years old and have a few years left in them thanks to new heel pads.
Jim CorriereHeel cup replacements
- Familiarity: I've put it through the wringer
- Fit: True to size
Easy to install heel cups on the back of Sidi shoes. My only concern is that the tiny screw that is used to attach the cups to the shoes wears down quicker than the rubber cup. If one doesn't notice the screw worn down then one will have to have the screw taken out cautiously so as to not strip the hole where the screw is goes into.
danielI have sidi Carbon wires. Which heel cup do I need? Thank you.
Jim CorrierePurchase Sidi heel cups. All Sidi carbon shoes will accept these heel cups. The cups come with two small tips that may or may not fit into shoe. If your shoe doesn't need the two tips then you can easily twist them off. Continue to watch for the screw that attaches the cup to the shoes. If the screw head is worn down then you will have to manipulate it out. Don't pull the screw out as that will strip the bore hole where the screw needs to be put in.
Jimm F.Height:6'2"Weight:205lbsThese Cost Justified a Pair of Wire Sidi
- Familiarity: I've put it through the wringer
- Fit: True to size
Just knowing this critical wear part is replaceable made it a no brainer to buy a pair of wire mesh shoes. I wore through the fixed heel pads in less than 3 months and don't walk around that much when doing my centuries.
Ed KilbournGive 'em a makeover!
- Familiarity: I've put it through the wringer
Every time I replace my heel pads on my Wire's, it puts a smile on my face, knowing that the shoes will feel almost new afterwards (walking around anyways) and I'm protecting the vulnerable carbon sole.
So nice that they are replaceable at all, that fact definitely extends the overall life of the shoes.
RobynScheduled maintenance at a great price
- Familiarity: I've put it through the wringer
Took advantage of a CC sale to lay in what is an annual consumable! At the price, it was easy to justify replacing the two most worn heel pads among my 3 pairs of Sidi road shoes, perhaps a little "early".
Troy RutherfordDon't wait until its to late
- Familiarity: I've put it through the wringer
If you have a set of sidi's with the Millenium 3 sole get a set of these now and check your shoes regularly. I waited until it was obvious to order. by the time I replaced mine I had to carve the old ones apart with a knife to get to the screw with a set of pliers as the phillips head of the screw was damaged beyond use.
Being replaceable they will keep your shoes usefull for a long time.
Rich W.Are the heal pads you currently have in...
Are the heal pads you currently have in stock considered "universal"? My shoe are over 7 years old so I would just cut off the nubs which is fine.
Sarah LThese are not meant to be universal as they are for certain sole specifics. It is up to you if you would like to try to make them work on an older shoe, but they are not designed to fit every SIDI shoe in their line.
Let us know if you have any additional questions!
Cheers,
Sarah
KatI need the heel replacement pads for older...
I need the heel replacement pads for older Genius 5 shoes that are rounded at the top in the gray section (no notch). Do you have these? If not, do you know where I can get them? Thanks!
Mike NelsonGearheadHi Kat,
Unfortunately, we're no longer carrying the old-style heel pads. Before your request, we had not had an order for those pads in several months.
Sheldon TI have put these on my Genius 5 shoes. Just cut the small nubs off the bottom and you are good to go. Minor differences in shape do not affect function. See photos attached.
