Save 10% every item in your cart »
Sale $44.99 $60.99 26% off

Item # SHI0332

Select options
  • Select options
  • One Color, 11-36 ($44.99)
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # SHI0332

Hyper glider.

For their Dyna-Sys 10-speed system, Shimano added another cog to their venerable XT level cassette. So like the previous 9-speed versions, the CS-M771-10 XT Cassette has the same Hyperglide tooth and ramp shapes to help the chain move effortlessly across its range.

The XT 10-Speed Cassette uses plated steel cogs for superior durability, but that doesn't mean that it weighs a ton. The largest six cogs are minimal in design and are pinned to two lightweight alloy spiders -- three cogs for each spider. The four smallest cogs go on separately, and the whole batch is secured with a sleek alloy lockring. This cassette is compatible with Shimano's Dyna-Sys 10-Speed shifter and rear derailleur.

The Shimano CS-M771-10 XT Cassette is available with three different cog options -- 11/32t, 11/34t, and 11/36t.

The cogs are configured as follows:

  • 11/32: 11-12-14-16-18-20-22-25-28-32
  • 11/34: 11-13-15-17-19-21-23-26-30-34
  • 11/36: 11-13-15-17-19-21-24-28-32-36

  • Plated steel cogs
  • Compatible with Shimano’s Dyna-Sys 10-speed shifters and derailleurs

Tech Specs

Cog Material:
nickel-plated steel
Carrier Material:
Hub Type:
Shimano or SRAM compatible
Claimed Weight:
275 g
Recommended Use:
mountain biking

Reviews & Community


Write a review

    Add a:
  • Photos
  • Videos

No file chosen

Rather attach a photo from your computer?


Only jpg, jpeg, png, gif or bmp files please.

Submit ReviewCancel

works great, not the best wear

  • Familiarity: I've put it through the wringer

I'm on my third in 1.5 years on my trek remedy so I'd ding it slightly for durability, but it's a nice cassette for the money.

Solid cassette

  • Familiarity: I've put it through the wringer

Slapped this cassette on my Scott Genius along with a Wolf Tooth 42 cog and I couldn't be happier. The shifts are crisp and because it is a Shimano, I know it is built to last.

Can't go wrong

  • Familiarity: I've put it through the wringer

Great cassette as always from Shimano. Used it to convert my cross bike to a 1x10 for commuting and have had zero issues. Works great with a Sram drivetrain.

Works great, long lasting

  • Familiarity: I've put it through the wringer

Great shifting and durability makes this cassette/drivetrain one to keep until they come out with the 1x15 group.

Great upgrade

  • Familiarity: I've used it several times

The Shimano XT cassette was a nice upgrade on my rear drive along with other XT components. High quality and a solid component from Shimano.

Best 10 Speed Buck Banger!

  • Familiarity: I've put it through the wringer

I just replaced my m771 cassette the other day that had around 2200 miles on it. I bet I could have easily hit 3k on it, but alas, I am converting to a new 1x setup. Since I am making the conversion, I thought I would replace pretty much all of my drivetrain. Right now, my bike is all XT, so I figured I would stick with that since I've had great luck with it.

In addition to the new cassette, I've even added a new Wolf Tooth GC (42t) for making climbs easier since I am losing my granny on my old 2x setup.

If XT is a bit too rich for your blood, essentially, you can always snag the HG81 (SLX series) for a tad less; however, your middle cogs will be riveted together unlike the m771 version.

I have a road bike with Ultegra 6700 Ten speed grupo. I want a 32 or 34 or 36 tooth 10 speed cassette to work with Ultegra 50-34 crank. Do I need a long cage der.?

I have the same setup and same problem. You will max out on a 11-32 cassette. From my research you want to buy: Shimano M771 9 speed rear derailleur. See:

Wolftooth Giant Cog Modification

  • Familiarity: I've used it once or twice and have initial impressions

I purchased this cassette to support a Wolftooth Giant Cog (40t) conversion of my 1 x 10 drive train - works incredibly well all put together. Check out the Wolftooth web site for more information.

I opted for the Wolftooth 16t cog to replace the cassette 15 & 17 cogs and I think that was the right move.

So far so good (1 ride), but will check back later in the season.

Don't forget to buy a new chain if you're going to convert to the GC.

Wolftooth Giant Cog Modification

I did the same as you, well, went with a 42t, but totally lovin' it!

xt cassette

  • Familiarity: I've put it through the wringer

works awesomely, until it breaks. I rode it pretty hard for 2+ years, until the alum arms for the larger chainrings sheared and broke. just ordered another.

something to note: these later models (2014+) fixed an issue that the earlier (circa 2012) models had: the older model's small cassette chainrings had narrow profiles with spacers between the rings. Since the interface between the chainrings and freehub body was as narrow as the chainring teeth themselves, if you pedaled hard, the chainring would cut into (and mar) aluminum freehub bodies. The newer models have the spacers between small rings integrated into the rings themselves, thus increasing the interface area between ring and freehub body, and reducing the marring of the freehub body.

XT Quality

  • Familiarity: I've put it through the wringer

This cassette is super durable and shifts crisp. Exactly what you come to expect from Shimano. I have it paired up with single ring in the front and it works great.

Another great XT product.

  • Familiarity: I've put it through the wringer

This is the best shifting affordable cassette available. Lasts a long time and shifts great when using an xt chain. It also is compatible with the extended range 42T cogs from 1up, wolftooth and others where you have to remove the 17T. I use a xtr on the race wheels and xt for training where the small weight penalty is nothing. Use a chain gauge and replace the chain when it stretches out of tolerance. These cassettes last a long time if you keep them clean and the chain lubed.

Another great XT product.
Avg. ride time: 9h 58m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.

Can't go wrong with XT quality

  • Familiarity: I've put it through the wringer

This 10 speed 11-36 cassette is a tough one to beat. It's plenty durable for logging big miles and it also shifts great and keeps the chain running smoothly. The profile of the teeth is nicer than that of SRAM options. It's not as light as XT, but for general use or for training purposes you can't go wrong.

Hi, Can I replace my Shimano CS-HG62-10...


Can I replace my Shimano CS-HG62-10 11-36 with this ?

My bike is equipped with

Rear Derailleur: Shimano XT RD-M786 SGS Shadow Type / 30 Speed

Front Derailleur: Shimano SLX FD-M671-A / 34.9mm

Shifters: Shimano SLX SL-M670-I Rapidfire plus / 2 way release Ispec clamp

Best Answer

This cassette will definitely work on your 10 speed drive train. It is a little nicer, lighter cassette than the CS-HG62, so you should have no issues with it!

Let us know if you have any additional questions.