A new version of the Next generation.
While the Magura MT5 Next Brakes are technically an all-new version of the MT brake series (previously there were only even-numbered MTs), the platform's been around long enough to earn its standing as one of the best all-around braking systems on the market. The MT5 gets some notable improvements over the MT4, making it an even better option for not much more money.
But first, let's look at what makes the "Next" MT brakes so great. The original MT was scrutinized top to bottom in the redesign to determine the most appropriate features per model. The MT5's master cylinder housing, piston, and handlebar clamp are made from CarboTecture SL injection-molded carbon fiber, stronger and lighter than the company's already-revolutionary CarboTecture material used on the MT4 and MT2 brakes. The master cylinder also retains its radial (perpendicular to the handlebar) configuration, because that affords the best modulation and sensitivity for the lever. The hardware of the lever pivot, however, has been simplified to improve reliability, reduce weight, and it's been moved 20mm closer to the handlebar, increasing leverage for even greater feel and control. Like the MT4, the MT5 gets an alloy brake lever, as opposed to the MT2's composite one.
The MT's calipers saw revisions as well. The primary upgrade the MT5 receives over the MT4 is the four-piston caliper, as opposed to the MT4's two pistons. Like the 4, however, the caliper is forged, as opposed to the entry-level MT2's die-cast construction, making the metal more dense for increased rigidity and responsiveness. Like all the Next calipers, its one-piece construction has been both lightened and enlarged to increase stiffness and heat dissipation for still greater control, and the four-piston design improves this even further over the two-piston format of the MT2 and MT4. The MT5's brake pads are top-loaded, too, for easy swapping, and any previous MT brake pads will work with the new calipers, but for the Next series, Magura engineered a new compound that increases friction, reduces noise, and prolongs pad life. As opposed to the MT2 fixed system, both the MT4 and MT5 caliper hose banjos are adjustable to make it easier to route the brake's hosing, no matter where on the frame the caliper is installed. Finally, the MT Next's bleed plug has been reinforced to be more difficult to damage in the event of a crash, further ensuring that the new generation of Magura disc brakes, like all before them, last years beyond the competition.
The Magura MT5 Next Brakes come in a Black/silver color scheme only, and one caliper/lever set weights approximately 380 grams, which is slightly heavier than the MT4s, but the difference in weight is easily compensated for in the increased control and stopping power afforded by the MT5's four-piston caliper. The calipers are post-mount style, and the brakes do not include rotors.
View more Mountain Bike Brakes
Reviews & Community
I have to say that I have really enjoyed these brakes:
+ With 203 rotors & Maxxis DHF's they will stop you as quick as a wall would.
+ I needed new bolts for pad retention & Magura hooked me up. Good Customer Service. I went with the MT7 style perf pads
- I had to bleed the brakes during the first month but I did also take my bike on an international flight.
-The pads lasted 3 park days & were then toast. maybe my expectations were too high.
-The brake lines feel delicate but maybe the stainless lines were just overkill.
-Fear of the CarboTecture SL injection-molded carbon fiber meeting a rock & exploding.
It says pre-bled but no mention of length. Are these prebled rear brakes? Is it a requirement to order the bleed kit for the installation?
Hey The Chad - These Magura USA MT5 Next brakes are pre-bled and you do not need the bleed kit to install them. They are ready to go out of the box although you might need to shorten the cable depending on your bike. Feel free to contact me directly with any additional questions.
- Kyle L. - Expert Gearhead