ShimanoXTR SM-BB93 Bottom Bracket
Item # SHI000Z
XTR. These three letters stand for Shimano's best, even with components as simple as modern Bottom Brackets like the M-BB93. This English-threaded BB is incredibly light, sealed for mucky conditions, and spins freely for top performance. It fits 24mm crank spindles and comes with spacers for compatibility with 68mm and 73mm shells.
- Tough, lightweight
- Fits 24mm spindles
- Compatible with 68mm and 73mm BB shells
What do you think about this product?
View
May 12, 2020
Will this work on my 2014 Salsa El Mariachi SS? Specs say 73mm bsa threaded bottom bracket.
Mark S.
July 6, 2019
Hello, Will this work for my Surly cross-check? It has 68mm bb, English thread, and tapered square shaft.
Ryan
October 24, 2018
Good product, cheap price
- Familiarity:
- I've put it through the wringer
I have been through a couple BB on this bike and just upgraded to the XTR after my XT got really rough after a couple years. These things work and they are cheap, not too much more needed.
JC
February 14, 2017
Will this work on my 2015 Santa Cruz Bronson (aluminum)? I will be upgrading my crankset to a Shimano XT 8000, 30T, 170mm crankarm.
Emily C.
July 8, 2016
Threaded
- Familiarity:
- I've used it several times
Threaded bottom brackets are the best! Easy to install and aren't notorious for creaking. Shimano XTR BB is light and durable. Cranks spin freely.
Dan Dalton
July 1, 2016
An excellent BB
Smaller and lighter than the older design
Alex Drinkwater
June 3, 2016
No squeaks or creaks
The BB is key in transferring wattage to the wheel, don't skimp.
Steve Simpson
May 24, 2016
The Best is in Reach.
- Familiarity:
- I've put it through the wringer
Shimano bottom brackets install easily, hold up well, and don't cost a ton of money. Replace as needed to keep the cranks spinning smooth!
Mike Nelson
August 27, 2015
Good so far
- Familiarity:
- I've used it several times
I upgraded from XT since these were on sale. I can't tell a noticeable difference in performance, so at this point I wouldn't pay any extra for XTR.
Tracy A.
May 2, 2015
BB Tool Adaptor
Easy to use and install.
Steve Tam
May 2, 2015
BB Installation Tool Adaptor
The bottom bracket comes with an adaptor to fit the cups for installation. It slides right into a Shimano bb tool and then onto the bb cup.
Steve Tam
May 2, 2015
BB93 Cup Size
Here is a photo showing the smaller size difference between the BB93 and the previous iteration of the XTR bottom bracket that worked with the M980/M985 crankset.
Steve Tam
April 22, 2015
Smaller cups than XT
- Familiarity:
- I've used it once or twice and have initial impressions
Don't freak out when this arrives thinking it's the wrong size. The cups are much smaller and it comes with an adapter for your normal BB tool for installation. It just covers the BB opening in the frame.
Brad Wegman
September 17, 2014
Does it comes with the TL-FC32 tool?
Gerson C.
Mike Nelson
September 18, 2014
HI Gerson, This bottom bracket does not include an installation tool. We have a good selection of both socket and wrench-style external bottom bracket tools. Give us a call or chat in to place your order, and we will get you the right tool!
September 17, 2014
Does it fit a Shimano XT FCM780 Crankset?
Gerson C.
Mike Nelson
September 18, 2014
Hi Gerson,, This Shimano bottom Bracket will work with all Shimano Hollowtech cranksets, including the Shimano XT FCM780 crankset.
June 4, 2014
Thanks, Rico! I'm looking for the most...
Thanks, Rico! I'm looking for the most durable bottom bracket for my bike, which has the Shimano M542 crankset. Are there more reliable (better) bottom brackets that you would recommend?
CONRAD C.
Rico
June 6, 2014
Well it depends on the money you want to spend, I would say the Chris King is the most reliable BB we stock at this point. I have put those on a lot of endure and DH bikes with no problems. I have seen the SRAM BB's blow out on Enduro and DH bikes from very avid endure DH riders. You have to consider how many times you have broken your BB if you break it a lot it will even out because you will be buying it twice as much. Spending more now could save in the long run. I hope this answers your question if you want to talk more about it email me directly at ececala@backountry.com
June 3, 2014
Will this fit a Shimano M542 crankset?
Will this fit a Shimano M542 crankset?
CONRAD C.
Rico
June 4, 2014
Conrad, The answer is yes those cranks have a 24mm axle diameter which this BB excepts. Let me know if you have anymore questions, at ececala@backcountry.com Thanks, Enrico
Scott Gartman
February 14, 2017
Hi Emily, Yes, this will work with that set-up.