SB130 CLR GX Eagle Factory Mountain Bike
Out of Stock
Don't worry though, we have a lot more All-Mountain & Trail in stock than that.
Shop Similar ProductsWarning: California Proposition 65
Why We Like The Yeti SB130 CLR GX Eagle Factory Mountain Bike
From sessionable side hits to the local enduro series, the Yeti SB130 CLR GX Eagle Factory Mountain Bike is ready for just about anything we find out on the trail. Built from Yeti's lightweight C Series carbon layup for the perfect balance of stiffness and compliance, delivers a responsive ride no matter how gnarly the trail gets. 137mm of Switch Infinity rear travel is supported by a Fox Factory Float X rear shock that gives us the ability to clean any line, from slippery, root-covered climbs to shale-laden descents. The Lunch Ride edition gets a slack 65.1-degree headtube angle to pair with the extra rear travel and short chainstays to keep the bike extra nimble through chunky terrain. A long reach and steep seat tube angle get us into the ideal power position to crush long climbs with plenty of room to move around the bike on adrenaline-inducing technical descents.
The SB130 CLR GX Eagle Factory kit starts with the reliable SRAM GX Eagle 12-speed drivetrain for its crisp shifting in almost any condition and a wide gear range to get us up and down the hill efficiently. A set of 4-piston SRAM Code R brakes gives us the power to modulate our speed as we rail berms and throw shapes off of side hits, while a set of 29er DT Swiss wheels ensures no obstacle stands in our way of a good time. This build gets an upgrade to Fox Factory-level suspension with a 160mm Fox Factory 36 up front with a FIT4 damper so that we can dial in our ideal suspension setup without getting a raging headache. Yeti leaves no stone unturned and rounds out this build with a Fox Transfer dropper and grippy Maxxis tires. The Yeti SB130 CLR GX Eagle Factory Mountain Bike is a mid-travel trail slayer perfectly capable of flowy freeride lines and speedy after-work loops too.
*Due to a high demand in the global supply chain and bike industry since the start of the pandemic, material weight and exact components are subject to change. We are working diligently to keep tech specs updated, and any adjustments will be of equal or better spec level. If you have any questions, reach out to a Gearhead by chatting online or calling 1-888-276-7130.
Details
- Highly capable mid-travel bike perfect for any MTB adventure
- C/Series carbon frame construction is responsive and strong
- Switch Infinity rear linkage offers an efficient pedaling platform
- Fox Factory Float X shock has unreal small-bump sensitivity
- SRAM GX Eagle drivetrain shifts crisply in mud, rain, and dust
- 160mm Fox Factory 36 fork helps soak up big hits
- Unique shock tune improves mid-stroke and bottom-out control
- 29-inch DT Swiss wheels offer proven, fast-rolling performance
- Item #YTIR1C4
- Frame Material
- C/Series Carbon
- Suspension
- Switch Infinity
- Rear Shock
- Fox Factory Float X
- Rear Travel
- 137mm
- Fork
- Fox Factory 36 FIT4
- Front Travel
- 160mm
- Headset
- Cane Creek 40 Integrated
- Shifters
- SRAM GX Eagle, 12-speed
- Rear Derailleur
- SRAM GX Eagle, 12-speed
- ISCG Tabs
- ISCG-05
- Crankset
- SRAM GX Eagle
- Chainring Sizes
- 30t
- Crank Arm Length
- 170mm
- Bottom Bracket
- SRAM DUB PF92
- Cassette
- SRAM XG-1275 GX Eagle, 12-speed
- Cassette Range
- 10-52t
- Chain
- SRAM GX Eagle, 12-speed
- Brakeset
- SRAM Code R
- Brake Type
- 4-piston, hydraulic disc
- Rotors
- 4-piston, hydraulic disc
- Handlebar
- Race Face Aeffect R 35
- Handlebar Width
- 780mm
- Grips
- ODI Elite Pro
- Stem
- Race Face Ride 35mm
- Stem Length
- 50mm
- Saddle
- WTB Silverado Custom
- Seatpost
- Fox Transfer Dropper 31.6mm
- Seatpost Travel
- [small] 125mm, [medium] 150mm, [large, x-large] 175mm
- Wheelset
- DT Swiss E532 or DT Swiss E1900 or Crank Bros Synthesis
- Hubs
- DT Swiss or GW or Crank Bros Synthesis
- Front Axle
- 15 x 110mm Boost
- Rear Axle
- 12 x 148mm Boost
- Tire Clearance
- 29 x 2.5in
- Tires
- [front] Maxxis Assegai EXO+, [rear] Maxxis Minion DHR II EXO+
- Tire Size
- [front] 29 x 2.4in, [rear] 29 x 2.5in
- Pedals
- not included
- Extras
- downtube protector, chainstay protector
- Claimed Weight
- 31.5lb
- Activity
- not included
- Manufacturer Warranty
- [frame] lifetime
Reviews
Q&A
What do you think about this product?
Overall Rating
5 based on 1 ratings
Review Summary
Fits True To Size
Screen reader users: the following list provides a visual scale to illustrate the product fit. Please refer to the heading above for the fit type in text.View
Selecting an option will reload the available reviews on the pageApril 10, 2023
Received my new SB130 CLR GX Eagle!
- Familiarity:
- I've used it several times
- Size Bought:
- XL
- Height:
- 5' 11"
- Weight:
- 201
I Bought the SB130 CLR GX Eagle XL (Watermelon). I could not pass this up for the price. I am 5'11", and this bike fits me perfect. I have taken it on the trails in my area 3 times so far. This bike is incredible! There is no pedal bob while pedaling on the saddle and it handles, so great. I have wanted this bike for 2 years. Thank you Competitive Cyclist, for such a great deal!
Do you have a question about this product?