RIP RDO 29 2-Star Mountain Bike - 2019
Out of Stock
Don't worry though, we have a lot more All-Mountain & Trail in stock than that.
Shop Similar ProductsWarning: California Proposition 65
RIP RDO 29 2-Star Complete Mountain Bike
All new for 2019, the RIP RDO 29 2-Star Complete Mountain Bike from Niner lops 10mm from its rear travel, helping to improve its pedaling, climbing, and all-mountain ability, while receiving significant geometry updates, making it capable as ever on rowdy downhills. Further frame refinements include its Rib Cage construction for added stiffness, increased standover height and room for longer dropper posts, a high/low flip chip adjustable geometry, and a retune of its CVA suspension platform. This 2-Star build is an excellent way to get this new bike as a complete as it comes ready to ahem, rip, with a FOX 36 fork up front and excellent DPX2 shock out back with SRAM's value-oriented NX Eagle 12-speed offering the same wide gearing range as its range-topping group, albeit with a slight weight penalty.
While the old RIP had a dual wheel size persona, the new RIPs are frames dedicated to each wheel size. This allows Niner to optimize the frame for each wheel size by dialing in the suspension kinematics and geometry specifically for each size eliminating compromises. Either way, you're getting 140mm of CVA rear travel that’s sensitive off the top and supportive in the mid-stroke paired with 150mm of fork travel and clearance for 2.6-inch tires with room for mud. This is the longest, lowest, and slackest Niner ever created, however, with the inclusion of its adjustable geometry via flip chips at the seatstay pivots, a Niner first, you can make adjustments as needed for your terrain and riding style.
The high mode geometry is perfect for tamer trails and daily riding. You'll quickly appreciate the climbing and pedaling efficiency of its steeper 75.8-degree seat tube angle and reworked CVA suspension platform. On the way down, you can shred in confidence with its longer reach, slack 66-degree head tube angle, and a 44mm, reduced offset fork. If you have some shuttling or bike park laps on the docket, its low mode brings out even more aggression by slacking out the head angle by a full degree (65-degree) and lowering the bottom bracket by 7mm. Niner further gives its sendy blessings by shortening the seat tube by 20mm to accommodate longer, 170mm dropper posts as well as increasing the standover height. Furthermore, a lower stack height and shortened head tube accommodate a wider range of fit and varying rise of handlebars. Lastly, the short, 435mm chainstays on this 29-inch version ensure the bike can handle tight singletrack trails as well.
Visually, one feature that's immediately apparent is the new frame design with a wide and stiff Rib Cage struts on the main triangle. This, in conjunction with a flattened top and down tube, wider main rocker link pivot, and an oversized rear triangle boosts the frame's responsiveness for precise handling. Things that might not be so noticeable are the durable and long-lasting Enduro MAX Black Oxide bearings at the pivots and Niner's wonderful end-to-end, full sleeve internal cable guides making any maintenance down the road a breeze. Other frame niceties include a sag indicator on the rocker link pivot, factory installed scuff guards and frame protection at vulnerable locations (the plastic "skid plate" on the lower link is awesome), FOX Live-valve ready, water bottle compatibility inside the frame, and a creak-free threaded bottom bracket with ISCG-05 chain guide mounts.
On the trail, you'll notice the struts reduce bottom bracket deflection down below for efficient pedaling while allowing the upper portion of the front triangle to remain compliant and better able to track across rough rock gardens, while the wide, flat surfaces found on the top and downtube help to absorb frontal impacts and vibrations from repeated waterbar bashings while resisting deflection under a torsional load. And since the rear triangle received beefier tubing, it allows Niner to remove the seatstay bridge at the rocker link opening up extra room for wider rim and tire combinations.
As we mentioned above, the RIP receives an updated CVA platform that's designed to increase pedaling efficiency by riding more in the mid-stroke of the travel. We experienced gobs of traction when scaling technical climbs while remaining sensitive and fully active, even under braking, while descending. It basically takes Niner’s proven patented CVA linkage layout and axle path and refines the leverage ratio curve for supple travel early on with more support in the middle, before progressively ramping up at end stroke.
The new, higher leverage ratio off the top makes it easier to set the shock in motion and overcome static friction. At the mid-stroke, the leverage ratio decreases toward the sag point, meaning less rear wheel force is transmitted to the shock allowing it to better support you in the travel. And at the end stroke, the leverage ratio increases just slightly to overcome the natural progressivity of an air spring, giving a bottomless, smooth response under the biggest hits.
Details
- An all-new RIP 9 RDO ready to tame all aspects of the mountain
- Fully internal guide sleeves for easy cable management
- 140mm of refined CVA travel smooths out big hits and pedals efficiently
- RDO Carbon Fiber layup provides weight savings and optimal stiffness
- Accepts 29in tires up to 2.6in wide
- SRAM's NX Eagle group packs value and a wide range
- Integrated frame protection is ready for all-mountain abuse
- BSA threaded bottom bracket for creak-free reliability
- Item #NNR00AF
- Frame Material
- RDO Carbon
- Suspension
- CVA
- Rear Shock
- FOX Float DPX2 Performance EVOL 3 Position
- Rear Travel
- 140mm
- Fork
- FOX 36 Float Rhythm Grip EVOL Sweep Adjust
- Front Travel
- 150mm
- Headset
- Niner ZS
- Shifters
- SRAM NX Eagle 12sp
- Rear Derailleur
- SRAM NX Eagle 12sp
- ISCG Tabs
- ISCG-05
- Crankset
- SRAM NX Eagle DUB
- Chainring Sizes
- 32t
- Bottom Bracket
- SRAM DUB
- Bottom Bracket Type
- English
- Cassette
- SRAM PG 1230
- Cassette Range
- 10 - 50t
- Chain
- SRAM NX Eagle 12sp
- Brakeset
- SRAM Level
- Brake Type
- hydraulic disc
- Rotors
- SRAM G2CS 180mm
- Handlebar
- Race Face Aeffect R
- Handlebar Rise
- 20mm
- Handlebar Width
- 780mm
- Grips
- Niner Grrrips Lock-On
- Stem
- Race Face Aeffect R
- Stem Length
- 40mm
- Saddle
- Niner Custom
- Seatpost
- SDG Tellis
- Wheelset
- Niner Alloy
- Front Axle
- 15mm Boost
- Rear Axle
- 12 x 148mm
- Tires
- [front] Maxxis Minion DHF 3C/EXO/TR WT, [rear] Maxxis Aggressor 2C/EXO/TR WT
- Tire Size
- 29 x 2.5in
- Pedals
- not included
- Recommended Use
- enduro, trail
- Manufacturer Warranty
- 5 years on frame
Reviews
Q&A
What do you think about this product?
View
Selecting an option will reload the available reviews on the pageSorry, we don’t currently have any of those types of reviews for this product.
Need Expert Advice?
Our Gearheads Can Help
Cancer and Reproductive Harm - P65Warnings.ca.gov