Tallboy 29 R Mountain Bike - 2019
Out of Stock
Don't worry though, we have a lot more XC Full Suspension in stock than that.
Shop Similar ProductsChanging the idea of what a trail bike can do.
Striking the perfect balance between cross-country and trail, the Santa Cruz Tallboy 29 R Complete Mountain Bike has 110mm of rear wheel travel, paired with a 120mm fork, and fast-rolling 29er wheels to ensure it's just as adept at chewing up aggressive climbs as it is shredding downhill, all with surgical precision. It's built up here with a combination of beat-'em-up SRAM widgets and FOX suspension, a kit that complements the unassuming reliability of the aluminum frame.
As with perceptions of 29ers, the Tallboy has changed a bit over the years, making it one of Santa Cruz's most commonly tweaked designs. Despite the changes, it's also remained one of the brand's most perennially loved models. Considering its revered status among 29er enthusiasts, a new Tallboy is a big deal, but before we get into the changes it's worth dwelling briefly on the flip chip—even if it may be somewhat old news by now. The flip chip sits in the upper link and can be rotated to allow the shock mount to migrate. Being able to reposition the shock attachment point effectively accounts for the 9mm difference in radii between 27.5+ and 29in tires, keeping the geometry as static as possible across wheel sizes. SC first introduced this feature on the Hightower, but the brand seems to have perfected it for the Tallboy; changing the Hightower results in a slight change in head tube angle, but the Tallboy's head tube angle remains the same for 27.5+ and 29in wheels.
Compared to the previous Tallboy, this version takes just a bit off the top of the head tube, dropping 2.2 degrees to fall from the standard 70.2 to a moderately slack 68 degrees. Courtesy of the Flip Chip's slight geometry alteration, that number stays the same whether you're running 29in wheels with a 120mm fork—as it's set up here—or 27.5+ with 130mm. The frame's chainstays and reach also joined the modern geometry movement during the bike's latest remodel; the stays are shorter by 13.3mm and the reach bumps up dramatically, gaining an average of 40mm depending on the size. (At 34.2mm, Large gained the least, and sizes Small and XX-Large gained the most: 43.8 and 45.6mm, respectively.) All told, the geometry tweaks add up to a chassis that's far more capable in virtually every trail situation than its predecessor.
Despite all the tweaks to geometry, the inclusion of a Flip Chip, and the centimeter of additional travel, the VPP design remains the same updated version featured on frames like the Bronson 2.0 and 5010 2.0. In all cases, the redesign was inspired by the enduro-minded Nomad, and the result is that the links stay out of the way, which lets the Tallboy accommodate a piggyback shock's external can without giving up the bottle cage. The repositioned links also make for more ground clearance, lower standover, and an additional boost in stiffness to the already stiff Boost back end.
The latest VPP's changes aren't limited to wandering links, though; the system's tuning has also been tweaked. Where the old suspension curve described a deep "U," the new VPP's curve resembles a flattened check mark, with less dramatic ramping on either end of the arc. The results are that, during the initial and mid stroke, it boasts increased bump compliance to keep the tires glued to the trail for more traction across lumpy trails and root latticed climbs. It also maintains its predecessor's firm feel during accelerations, so it won't dampen the Tallboy's spirited kick while jockeying for position in a mass start or a finishing sprint. The shock's ramp-up arc doesn't dramatically alter as the shock compresses, so the pedaling platform stays consistent across travel, with less wallowing, bob, and bottom-outs — even while the Boost axle's path turns rearward to absorb bigger hits deep in its travel.
As with the its slacker stablemate, the Hightower, the Tallboy's reworked linkage means it's one-by only, but it still comes equipped with ISCG 05 tabs. The threaded bottom bracket is another feature that we've come to just expect from the California-based brand, and it's a strong selling point for those who don't like dealing with the tricky tolerances and creaky interface of press-fit models. The Tallboy's 27.5+ mode accommodates every manufacturer's 2.8in tires, but some 3in models may have clearance issues. Understandably, its clearance decreases as a 29er, but SC still ships it with 2.35in tires, which we think occupy the sweet spot of cush and traction without getting top floppy and muddying trail feel.
Details
- Alloy trail machine that climbs as well as it descends
- 5in of aggressively fast VPP travel
- Flip-chip enables compatibility with 29in and 27.5+ wheels
- 74-degree seat tube angle optimizes pedaling efficiency
- Longer reach shifts weight forward for better traction
- Workhorse drivetrain isn't afraid to get rowdy
- Item #SNZ00HM
- Frame Material
- aluminum
- Suspension
- VPP
- Rear Shock
- FOX Float Performance DPS
- Rear Travel
- 110mm
- Fork
- FOX Rhythm 34
- Front Travel
- 120mm
- Headset
- Cane Creek 10 IS Integrated
- Shifters
- SRAM NX Eagle (12-speed)
- Front Derailleur
- n/a
- Rear Derailleur
- SRAM NX Eagle (12-speed)
- ISCG Tabs
- no
- Crankset
- SRAM NX Eagle DUB
- Chainring Sizes
- 32t
- Crank Arm Length
- [x-small - small] 170mm, [medium - x-large] 175mm
- Bottom Bracket
- SRAM DUB
- Bottom Bracket Type
- BSA threaded
- Cassette
- SRAM PG1230 (12-speed)
- Cassette Range
- 11 - 50t
- Chain
- SRAM NX Eagle (12-speed)
- Brakeset
- SRAM Level T
- Brake Type
- hydraulic disc
- Rotors
- 180mm Avid Centerline
- Handlebar
- Race Face Ride
- Grips
- Santa Cruz Palmdale
- Stem
- Race Face Ride
- Saddle
- WTB Silverado Race
- Seatpost
- Race Face Aeffect
- Wheelset
- WTB ST i25 TCS 2.0
- Hubs
- [front] SRAM MTH 716, [rear] SRAM MTH 746
- Front Axle
- 15mm Boost
- Rear Axle
- 12 x 148mm
- Tires
- [front] Maxxis Minion DHF EXO TR, [rear] Maxxis Crossmark II DC EXO TR
- Tire Size
- [front] 29 x 2.3in, [rear] 29 x 2.25in
- Pedals
- not included
- Claimed Weight
- 31lb 4.8oz
- Recommended Use
- cross-country, trail
- Manufacturer Warranty
- lifetime on frame
Reviews
Q&A
What do you think about this product?
View
Selecting an option will reload the available reviews on the pageSorry, we don’t currently have any of those types of reviews for this product.
Need Expert Advice?
Our Gearheads Can Help