- Detail Images
SRAMRed eTap AXS Front Derailleur
Temporarily Out Of Stock
Item # SRM00GX
Don't get too bummed. This item is on the way and will be available for purchase as soon as it rolls into the warehouse.View Similar Products
What do you think about this product?
June 4, 2021
Can I use this the red front derailleur to replace my force etap front derailleur? Thank you in advance.
April 7, 2021
Hi Will this Etap AXS Front Derailleur be compatible with the Red Etap Left shifter, the one forbghe 2x11 speed? Thank you in advance
March 23, 2021
ETap - No Problems
- 5` 11"
- 190 lbs
I’ve had my Red eTap drive chain for three years and my wife has had her set for more than two, and hasn’t missed a shift once. The Interface is intuitive. Left shifter is down, right shifter is up. Both for the front derailleur. Once it is dialed in using the micro adjuster on the bike stand no further adjustments were required. My wife has strength issues with her right hand so the eTap has been perfect for her. It was an easy fit on her bike to remove the Ultegra groupset and hang the SRAM system in its place. No wiring to snake through the frame so it worked on her bike which had external cables.
June 14, 2019
Beware of electronic problems
- I've put it through the wringer
I have a SRAM AXS groupset on my new Canyon Endurace. After about 500 miles, my front derailleur is refusing to shift. I tried everything - firmware upgrades, pairing, reassigning buttons, hard reset - but nothing solved it. I'm in the midst of getting a replacement from SRAM (20 days into the process and no derailleur yet). I looked at two options for my Canyon Endurace - SRAM AXS and DuraAce Di2. I figured wireless was the way to go. But I did not anticipate electronic problems. Here's a quick comparison of Di2 vs. AXS (I have a Di2 groupset on my BMC GranFondo): 1) Shifting buttons: SRAM - single button is very intuitive (press both to toggle front derailleur) and if your hands go numb like mine, it's easy to mistakenly press the small button on Di2. 2) Shifting: Di2 - definitely faster and I like how the front derailleur will automatically adjust to rear derailluer shifts. 3) Gear ratios: SRAM - I've got a 10-33 cassette with a 35/48 front, giving me more high-end and low-end than my old Di2. 4) integration with Garmin: Di2 - The SRAM battery field show as 5 bars (not a percentage) and I think it shows the battery with more charge (usually the front), so the field is fairly useless. Also, the Garmin does not support a 12 speed in the gear indicator. 5) Rear derailleur adjustment while riding: Di2 is easier to enable and shows up on my Garmin, along with the +/- micro-adjust setting. With SRAM you have to see if LED is on when you press a small button on the lever, which is almost impossible to see while riding. 6) Batteries: SRAM - it's nice to have a battery you can take off the bike. It's also nice to be able to swap front and back batteries (they are identical) if the rear derailleur runs out of gas on a ride. 7) Looks: SRAM - hard to compete with no wires and no control box below the bars. 8) Reliability: Di2 - I have over 12,000 miles on my Di2 bike and not a single problem. My SRAM front derailleur stopped shifting after 500 miles. As you can see, there isn't a clear winner, but if I had a do-over, I would change to Di2. The reliability alone is worth it.
June 22, 2021
Had the same issue with my red axs front der…. Simply one day stopped shifting… local distributor said it was covered by guarantee…. Buuuut…. No derailleurs available for guarantee replacement. My Ultegra di2 has been flawless for 3 years… easy call!