Item # SRM009L
SRAM Red Rear Derailleur $310.00
The best never rest.
Although 12-speed cassettes have the mountain bike world abuzz, road looks to be firmly in 11-speed land for the foreseeable future, and no derailleur in SRAM's line gets through that gear range better than the Red Rear Derailleur. Billed as 'True 22', the pairing of Red's front and rear derailleurs allows you to utilize every one of these gears, in any combination, without adding any weight to the already outstanding Red drivetrain system. The Red Rear Derailleur stands in as an integral component of the Red groupset, calibrated for 11 speeds using the innovative technologies that have made SRAM Red an industry leader when it comes to exact, predictable shifting under the world's most demanding riding conditions.
When SRAM first introduced its 10-speed Red component group, the heart of the industry-shaking design was its 1:1 Exact Actuation technology. In ordinary terms, this means that with each shift the derailleur pulls the same exact length of cable, regardless of what gear you're in. 1:1 is simple to set up, it stays in adjustment longer, and it provides laser-accurate shifting. The 11-speed system builds on that 10-speed foundation, boating even tighter shifts than before as we now have smaller gaps between cogs.
The Red Rear Derailleur incorporates a clean, air-cheating, low-profile mounting bolt that's made of titanium to keep weight as low as possible. The long upper knuckle clears up to 28-tooth cogs, and it is made of extremely stiff forged aluminum to resist flex, which helps to maintain near-perfect gear alignment. The inner carbon fiber pulley plate has also been enhanced to resist flex, increasing rigidity for precise gear changes, and its low weight results in a light action.
The pulleys themselves were a focus area for SRAM engineers, and they improved weight, durability, and operation. Coined AeroGlide, SRAM optimized the jockey wheel's profile so that the chain will glide more efficiently over the tooth profile as it threads through the cage. This helped silence a notably noisy drivetrain and enhanced chain movement across the cassette. Most would call it a day with those advancements and skip out early for a ride, but SRAM's R&D team developed an elastomer coating to further quell pulley noise. The SRAM Red Rear Derailleur also receives a barrel adjuster for simple fine tuning.
- Drive confident shifts with SRAM's Red drivetrain
- Carbon and titanium target angel-of-the-mountains weight
- Pairs with matching front derailleur to avoid cross-chain rub
- Jockey wheel and pulley mute everything but the tires' hum
- Compatible with SRAM double 11-speed road drivetrains
- SRAM pushes the boundaries with innovative design
Actual weights are measured in-house by the Competitive Cyclist team.
Have questions? Chat with a Gearhead
Claimed weights are provided by the vendor.
Have questions? Chat with a Gearhead
View more Road Rear Derailleurs
Reviews & Community
They break; over and over
- Familiarity: I've put it through the wringer
I have a Look 695, fully SRAM equipped. Since 2012 I have had 7, yes 7 SRAM Red rear derailleurs blow apart while I was riding. Number 7 was today; I was riding my rollers and the unit shot cage parts across the room. The cage was actually broken into several parts by the guiltless chain. So: The pivot pin that holds the cage on the derailleur body uses a primitive "mushroom" flange that is retained by a long screw. Over a few thousand miles the screw wears down the flange; then the cage erupts from the bike, often destroying the chain, etc. I don't want to replace all my parts, so I'm ordering a Force 22. At least when IT explodes, I won't be watching $250 + dollars lying on the road/floor/etc.
Does the medium cage work with an 11-32 cassette?
Yes. The Medium cage will work with an 11-32 cassette.
What is the difference between short and medium cage? This is an upgrade for my TT bike. Thanks