Winter Kit Special: 20% Off A Top & Bottom | Shop Now
This carousel displays a list of buttons that updates the main product image when a button is clicked
  • Options
  • Detail Images

SRAMForce 22 Hydraulic Disc Brake

Sale 23% Off$269.99 - $294.93

Item # SRM002Q

Select options
  • Cancel
  • Select options
  • One Color, Right ($294.93)
  • One Color, Left ($269.99)
Add Protect+ Powered by Extend™
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # SRM002Q

Force 22 Hydraulic Disc Brake

When SRAM's Road hydraulic disc brakes hit the market last year, their performance was unprecedented. Incredible control, power, and consistency. The company readily admits, however, that they weren't as excellent and reliable as they could be, so for 2015, subtle but significant improvements address the aforementioned and help them reclaim their crown in the rapidly-growing world of road-ready disc brake systems. The SRAM Force 22 Hydraulic Disc Brake swaps out a few materials and gains a few grams compared to the Red 22 version, but otherwise is built with the same DNA to deliver an amazing braking experience.

To reboot its original road and cyclocross hydraulic braking systems — which were already ahead of their time — SRAM pulled apart every molecule of their anatomy to find room for improvements. The lever body, housing the reservoir and master cylinder, was reconfigured for more efficient internal spacing while at the same time boosting strength and stiffness, resulting in solid, consistent performance, regardless of braking or weather conditions. The master cylinder piston itself was also completely revamped, receiving an all-new bore design and new seals, after being subjected to thousands upon thousands of testing hours in every temperature and performance setting imaginable. The goal was absolute reliability, and the new system delivers.

SRAM was far from finished with updates, however. The new higher-capacity fluid bladder — the part of the system designed to maintain braking feel and consistency in compensation for pad wear — was also redesigned to improve fluid flow, so your brakes feel as great brand new as they do after a season of racing. On the action-end of the line, the caliper spring was re-engineered for more even pad contact and smoother retraction, translating into a more consistency and control in hand, regardless of riding conditions. Finally, the shift paddles were trimmed slightly to be both lighter and more ergonomic, and cyclocrossers especially will appreciate the new shape that allows for greater clearance when wearing thicker gloves.

As mentioned, the SRAM Force hydraulic system makes a few material substitutions compared to the top-shelf Red system to drive home the value. Force utilizes carbon brake levers but alloy shift levers, as opposed to Red's all-carbon configuration, and stainless steel hardware is employed, as opposed to that made of titanium. The system is fully sealed and easily serviceable, too.

The SRAM Force 22 Hydraulic Road Disc Brake is sold individually, in either left-hand or right-hand versions, so purchase one of each if you'd like a set. Each unit is pre-bled and includes the brake/shift lever, hosing, and caliper. Rotors are not included, but SRAM strongly recommends using its Centerline rotors — 160mm for road applications and 140mm for off-road/cyclocross use. The system weighs 471 grams per wheel, including a 160mm Centerline rotor.

  • SRAM's hydraulic disc brake set for road, cyclocross, and gravel
  • Redesigned lever body improves finger hold and overall comfort
  • Zero Loss tech for immediate cable tension and rapid shifting
  • Double Tap for multiple gear shifts in a single lever-throw
  • Redesigned bladder and caliper springs for improved function

Tech Specs
Levercarbon fiber
Lever Adjustabilityyes
Mount Typepost
Rotornot included
Rotor Size[recommended, road] 160mm, [recommended, cyclocross] 140mm
Recommended Useroad, cyclocross
Manufacturer Warranty2 years

Actual Weight

One Color, Right
One Color, Left

Claimed Weight

Claimed weights are provided by the vendor.

Have questions? Chat with a Gearhead

1lb 0.6oz

Actual weights are measured in-house by the Competitive Cyclist team.

Have questions? Chat with a Gearhead

What do you think about this product?



Is this a 10 or 11 speed shifter.

>Rating: 4

What is a front derailleur

I've put it through the wringer

I have been riding SRAM 1x drivetrain for years on the mountain side, but was a bit worried about dropping my front derailleur on the road side. I decided to give the 1x a shot on my Niner RLT because of the simplicity and weight reduction. Also, with a trip from Banff, CA to Whitefish, MT on the Divide Route, I was worried about the problematic issues of chain suck and other issues caused by a front derailleur. The Force 1x group did not let me down. Crisp precise shifting with not a single issue on the whole trip. I used a 38t up front and a 10/42t rear. The climbing gear only let me down on the Whitefish Divide climb, which I was able to ride clean, but with a heavily loaded bike packing set up, a big bail out gear would have been appreciated. I think I would like to at least have a 46t in the rear for future trips that include a load of climbing.

>Rating: 4

Works Fine

I've used it several times

I have not had nearly the same experience as the reviewer below. Nowhere in my experience did the brakes do anything but stop. No squealing, no issues popping the pads in and out. Not sure what the person below is experiencing an issue with. Shifting is great. Havent had any issues with the teflon wearing off either. That does tend to happen once the cable has stretched significantly though. All in all a great system, and looks much more clean than Shimano options.

>Rating: 3

Amazing shifting, frustrating brakes

I've put it through the wringer

Let me be clear...braking performance is fantastic. Your tires will slide before these brakes give (even in rain/slush/snow). But setting up new pads is a gigantic pain and they are still prone to squealing. Not the Avid turkey warble that hurts your ears, but just enough to be incredibly annoying and make you wish you didn't pay such a premium for these brakes. As for the shifting, it is absolutely fantastic - but with a catch. The first thing you should do is take that plastic coated inner wire and throw it out so you can replace it with a quality stainless inner wire. It will slowly peel off and bunch up inside each cable stop, making your shifting gradually more mushy the more you use it. Seriously, since switching to a quality stainless inner cable the shifting might be the best I've ever had. Overall I'm still more pleased that dissatisfied. The hoods (where I spend more than 90% of my time) are incredibly comfortable for my hands. The shift paddles feel great on my fingers but are still very easy to use with thick lobster finger gloves in the winter as well as bare hands in the summer. Shifting is crisp and responsive. Brake levers feel great, and once you get used to using discs on the road feathering the brakes has become second nature. Being able to have full performance braking in the rain is also a huge plus, with tires and bike control now being the limiting factor. Honestly, I don't know if I'll ever be completely happy with regular road calipers anymore, road discs are just so amazing. That being said, the brakes are still frustrating. I've become spoiled by the XT 785 brakes on my hardtail, and these are not nearly as smooth even though I use 160mm Sram rotors on both bikes. Bedding in the brakes takes a lot more time than Shimano and is hardly fool proof. They've never once bedded correctly the first time, usually requiring me to go back and clean everything with alcohol all over again before sanding and adding a little flame, and even if they bed in right they can start squealing again after a few rides which may or may not go away after a few hundred miles. At least the pads last longer than mountain bike pads seem to, although even with a dead straight rotor it is sometimes difficult to get the calipers set up to not rub since the pads sit so close to the rotor. Overall I've put a little over 6 months and 3000 miles on these shifters and brakes, and if it wasn't for the frustrations with the brakes I'd be incredibly happy. If you hate Shimano and want some powerful brakes, give these a try - especially if you don't mind tinkering with your bike. Shifting is wonderful and braking power is amazing, but I'd be lying if I said I wasn't currently pricing out a swap to Shimano's RS685 right now. Frustrations such as these shouldn't be present in a product that retails for nearly $1000/set.

Rob, thanks for the review. I'm riding XT and my mtn bike and my wife has them too. I was thinking of switching to these SRAM brakes on my CX bike but I may have to stick with Shimano.

I've have this brake set on 2 or 3 different bike, road, CX and NEVER had any issues. they are awesome.