- Options
![Shimano -]()
![Shimano -]()
Item # SHI005G
Item # SHI005GDura-Acing the chainring test.
The fantastic engineering of Dura-Ace finds its way into every nook and cranny of the groupset, and that most certainly applies to the Shimano Dura-Ace 9000 chainrings. Made of precision-machined alloys that are carbide-reinforced for strength and longevity, the rings shift smoothly, look great, and last forever. Keep in mind, however, that they are designed specifically for Shimano 11-speed road drivetrains (and cranksets), so trying to use them for other drivetrains will notably compromise their performance. Available in both Silver and Black finishes, they come in many different sizes.
- Machined alloy with Carbide
- Shimano 11-Speed compatible
View more Road Chainrings
Reviews & Community
REVIEWS
Robert J.I would like to know what is the smallest chainring I could put on my Dura ace 53 39 system that is on my trek madone.
Duncan BrittEmployeeLove Shimano
- Familiarity: I've used it several times
I love all of Shimano's bike parts. I purchased this chain ring to dummy down my drive train a little for my aging knees.
Jose A.I currently have a 34/50t chainring and was wondering if I could replace the outer with a 52t ring. Is it absolutely compatible?
JasonYou can run it, but it is not recommended.
Tommy LiaoReplacement rings
Pro tip: if you only stay in your small ring, the replacements are really cheap. So just don't ever use the big ring. #tipsfromtommy
Also the 36t will work just fine with a 53t or 50t outer.
sa_2823425If I have an Ultegra Di2 53-39 setup, can I use the DA 36T chainring to make my bike 53-36?
Ronald A.i have a dura ace 9000 group set up but my crankset is 53/39 , can i convert my existing crank chain to compact 50/34 ?
Scott GartmanHi Ronald A, You can swap 50/34 to 53/39 using your existing dura ace 9000 crankset.
Trevor JBest in the Biz
- Familiarity: I've put it through the wringer
Stiffest chainrings you can buy, to complete your DA crankset.
Andrew H.Can I make a 2X11 system into a 1X11 for with a ST-RS685 for CX? Right now it's 46/36 chainrings, but I'd like to go with just 42. Or 39? Thoughts? Thanks in advance
Tinho CostaGood Morning Guys,
I have a Dura Ace 11s 53/39 and i want to chance from standard to compact.
My questions is: this crankset will fit? Because my mechanic said that i need one with BCD 130mm.
Here is the photo so that you can help me out.
Thank again
Andrew N.The dura ace 9000 (11 speed) is all th same bcd, along with 11 speed ultegra and 105
Tinho CostaGood Morning Guys,
I have a Dura Ace 11s 53/39 and i want to chance from standart to compact.
My questions is: this crankset will fit? Because my mechanic said that i need one with BCD 130mm.
Here is the photo so that you can help me out.
Thank again
Joe SingerWill the 54t chainring work with an Ultegra 6870 front derailleur?
pwo101586686-0Will a 36t chainring work with a 50/34 Dura Ace 9000 crankset even though the ramps and pins on a 50t is optimized for 34t?
Ryan M.Is the inner chainring compatible with an ultegra 6800 crankset? Intuition says "yes" but I've been wrong before. Thanks
Andrew N.Yes, I have a dura ace inner because ultegra wasn't available when I needed it.
Chris P.Are these chainrings compatible with the quarq Elsa RS?
Trevor JExcellent question! These chainrings are compatible with the new Quarq Elsa RS. If there's anything else I can help you with please contact me at tjackson@backcountry.com.
Indy CyclistI currently have the Dura Ace 7900 crankset with 52/39. If I bought this 36t would it still fit on the older (7900) crankset?
Thanks in advance
big105308677-0Definitely will not fit, The 9000 dura ace chainring has only a 4 arm design, 7900 series uses a 5 bolt pattern.