Item # QRQ0019
Quarq DZero Power Meter Spider $679.00
Upgrade your spider's brain.
Quarq built the DZero Power Meter Spider for two very good reasons. The first is upgrade purposes, letting current Quarq owners take advantage of the DZero's updates by swapping out the spider but keeping the same crank arms and spindle. (After all, why dump perfectly good components?) The second reason is part of Quarq's new Quarq Prime initiative, where the brand is shipping SRAM-built cranksets on new bicycles that are already primed for power. Like with the upgrade process described above, you'll just have to pop the Prime crank's mundane spider off, replace it with the DZour power model, and get to cranking.
If you've got the Prime crank and want to up your training/competitive game, then the upgrade makes obvious sense. If you're already rocking a previous generation of Quarq's 8-bolt powermeter spider, then the reasons are, admittedly, less compelling, and are defined by the internal changes Quarq made to the meter. Of these, the most important is to the heart of the meter itself: the strain gauges and measurement circuitry.
The new design requires less correction in order to maintain accuracy in drastic temperature changes. Fewer corrections mean the DZero also better rations battery life than Quarq's previous power meter models, though when the battery does go out, you can still change it without tools or having to ship the whole thing to the manufacturer. It still incorporates five strain gauges strategically placed throughout the spider, and it's also still got the same claimed accuracy of +/- 1.5%, so its numbers are 0.5% more accurate than most meters.
DZero's accuracy is further boosted by the return of Quarq's 10k dynamic temperature compensation technology, which alleviates the need for constant, mid-race zeroings in variable conditions. Even if it's just coasting for a few seconds or toggling through your head unit to the proper option, it can still be the difference between winning and losing. It's also obnoxious as hell. The DZero is equipped with an auto-adjust schedule based on a constellation of around 10,000 data points that chart how the unit responds to temperatures ranging from zero to 130 degrees Fahrenheit. This lets the power meter figure out the atmospheric details for you with minimal drift, so you can focus on turning the crank, not babysitting it.
Power Balance and Omnical are two additional returning features that record total output and output for either leg individually (Power Balance) and let you swap rings without recalibrating or negatively impacting accuracy (Omnical). As with previous Quarq models, the Dzero communicates to your head unit via ANT+ wireless, but Quarq also adds Bluetooth to this generation. Up till now, we've always tempered the obligatory head unit-compatibility statement by writing that your current computer is likely already compatible with the power meter; now, we can just state outright that it is compatible.
We recognize that there is value in cycling components that can stand up to the elements we often encounter throughout the course of a year of training, but Quarq demonstrates its penchant for being overly thorough by ensuring that the unit's internals can handle comically extreme conditions. The system is waterproof for 30 minutes while submerged under one meter of water, a feature that will come in handy on days you take your bike on the swim leg, too.
As the above implies, the DZero is effectively a catch-all for almost every bit of tech Quarq has thrown at the power meter problem over the past decade. This includes the AxCad accelerometer, which provides cadence information without the need of an additional sensor or magnet. The DZero is also compatible with various training software such as Training Peaks WKO+, Training Peaks, Golden Cheetah, and Strava. Unlike previous Quarq power meters, the DZero's Bluetooth compatibility lets it sync with the Qalvin BLE app to easily tune, tweak, and set zero offsets. That alone might be reason enough to upgrade.
If you're a returning Quarq-ateer, the key to upgrading is ensuring compatibility. First, we can definitively confirm that all models with the Quarq Prime Power Meter sticker are DZERO-ready. If you're upgrading an older model, then you'll need to identify it on the chart included below, which lists which legacy eight-bolt power meter chassis the DZero is compatible with. This is a good time for us to belabor the fact that that the DZERO is only compatible with eight-bolt models—a trait identifiable by the eight tiny bolt holes occupying the spider's scalloped inner edge.
Once you've determined that you do, in fact, have an eight-bolt chassis, then the chainring bolt pattern is the next compatibility signpost. Quarq offers models for crank arms with non-hidden and hidden bolt chainring bolts. Different Quarq (and SRAM) crank arm chassis changed to hidden chainring bolts in different model years, but identifying them is simple; it's the cycling equivalent of biologically sexing your crankset. To identify your crank, just take a look at it from the drive side. If you can see all five bolts, it's non-hidden; if the fifth bolt is obscured by the crank arm, it's hidden. Once you've identified that element, you can match it up on the chart below.
- A powermeter upgrade for Quarq Prime and existing Quarq chassis
- Redesigned strain gauge system is even more precise
- Provides power for each leg individually
- Broadcasts via ANT+ and Bluetooth protocols
- Requires less correction for better data and longer battery life
- Battery can be changed without tools by home mechanics
- Installation tool included to easily swap between chassis
- See chart below to ensure compatibility
View more Powermeter Cranksets - Road
|Quarq Prime||Elsa RS|
|SRAM 10- or|
|Most 10- or|
|XX1 Eagle Boost||yes (168 Q-factor only)||yes|
Reviews & Community
I was wonder if this will work for my groupset. I'm using SRAM Red 22 with a S-work 172.5 crankarm.
I assume I need a 110mm BCD non-hidden spider
You will need a Specialized specific interface DZero, which we are going to be getting back in to stock soon.
Hi, I have a Force 22 crankset and I think I need the 110mm BCD Hidden Bolt spider version but I just want to be sure. am I right?
Thank you for the question and the picture of the crank. That is helpful. Unfortunately I can't answer your question based on this photo. We need to see the inside. If you see 8 bolts holding on the spider, this power meter will work. You may see three bolts; if so, this spider will not work and you will need a new crank to use a Quarq DZero. I hope this is helpful; please email me at firstname.lastname@example.org or call 801-619-7476 if you have further questions.
I have a SRAM Red Etap groupset. Which spider will work with a 52/36 crankset? Is it the 130 BCD, Hidden Bolt?
You'll need a 110mm BCD Hidden Bolt spider. But you may also need new crankset.
Is this Dzero spider compatible with a SRAM Force 1 crankset?
Unfortunately unless it was manufactured in 2017, that's highly unlikely.
Can I use this spider with my existing Force 1 GXP crankset?
Yes. You are good to go. Please give me a call or send an email with further questions.
Correction. It depends on the age of your crank. Can you send a picture to my email?
- Familiarity: I've put it through the wringer
I've owned or had experience with every power meter on the market and theres no beating the value, reliability, accuracy, or weight that Quarq offers.
Sure, there are cheaper single arm power meters, but all they do is double the power on the left side. If you pick one up without knowing of a possible leg imbalance (I personally have a 54:46 split because of a past injury), your power numbers may be 10% high or low, which negates their claimed 2% accuracy.
Quarqs also have a proven track record. Many of the newer companies out there have only had their product out for a few years, and many are on their second or even first versions of public release units. The DZero is the culmination of 10 years of technology at Quarq, and it is their third major release, fixing a few small issues that were present on the previous Elsa and Riken.
The DZero has a +/-1.5% accuracy which means you can trust your power numbers. I've used other power meters in the past which claim +/-2%, but all their numbers have always seemed at least 5% off from my Quarq numbers. The last thing you need when you are training is to not be confident in the data you have, it just takes away one more variable.
Heres some weights, verified on my scale:
110mm BCD NHB Spider - 122.0g
8 Retention Bolts - 7.8g
165mm BB30 Carbon crank arms - 404.3g
BB30/PF30 Spacers - 17.8g
165mm GXP Carbon crank arms - 416.0g
Complete DZero Carbon NHB BB30 165mm - 551.9g
Complete DZero Carbon NHB GXP 165mm - 545.8g
This spider is a great option to upgrade your existing Quarq Prime, Red 22 BB386, or newer Force 22 crankset and add some data to your rides.
Feel free to reach out with any questions you may have!