- Detail Images
PivotSwitchbladeSwitchblade Carbon 29 Race X01 Eagle Mountain Bike - 2019
Temporarily Out Of Stock
Item # PIV006U
Don't get too bummed. This item is on the way and will be available for purchase as soon as it rolls into the warehouse.View Similar Products
More Switchblade builds
View more All-Mountain & Trail
What do you think about this product?
March 27, 2020
Playful and Sturdy
- I've used it once or twice and have initial impressions
This pivot switchblade race edition with the carbon frame is a crazy fun bike. It was shipped well protected with detailed instructions on assembly. After about an hour of riding the wire came undone from the bottom of the dropper post but I was able to contact customer service and they have sent out a new piece and refunded me the money to get the part installed. They were quick to act when they learned of the problem and helped me immensely. Will continue shopping at backcountry based off this experience alone.
December 20, 2018
IF Quiver Killers Exist...
- I've put it through the wringer
This is a review on the Carbon Switchblade, I have the X01 build, been on it for 8 months, but only addressing the frame and ride characteristics of the bike here. The X01 build package is sturdy, reliable, and you can't beat the range of Eagle. Additionally, the FIT4 Fox 36 and X2 shock offer an infinite amount of tunability to your suspension setup. Both shock and fork have performed exceptionally well (coming from a Rockshox guy) once you take the time to get your settings dialed. Look to those components specifically for detailed reviews of each. Here we go! First off, no one comes close to the quality of a Pivot frame. They come at a slightly higher price point than most brands but once you see one or better yet, ride one, you immediately realize what the hype is all about. The frames are just OVERBUILT. Super large bottom bracket reinforcement, large head tubes, down tubes, and top tubes. The beefiest rear triangles of any bike on the market paired with Super Boost+ makes it the stiffest frame I've ridden. Pivot NAILED the geometry on this bike with reach, head tube angle, and chain stay length making it a 29er that can climb, descend, and rip tires off rims when corning. The stiffness allows the bike to track through turns with precision and confidence. No wonder the bike is unchanged for a few years running. What has changed with the 2019 version is an upgraded rear shock (from DPS to DPX2) and front fork (from 150m 51m offset to 160m 44m offset). Still perplexed on the fork change, this bike feels perfect and well balanced with a 150 up front. You'll find the DW Link on other manufacturer’s bikes but Pivot reserves the best version of the design for themselves. Keeping the bottom pivot point low for unmatched square edge hits, this thing laughs at Moab tech climbs and harsh big hits down Whole Enchilada. The pedaling efficiency of the DW Link system is downright impressive. You'll experience ZERO pedal bob, you can even stand and mash this bike and it only lurches forward rather than blowing through the travel like other designs. Shock and fork lockouts are handy, but you won't need or use them on a DW equipped bike. 27.5+: This is the setup I use for sloppy, wet, less than ideal conditions. I've got a set of Reynolds Black Label wheels wrapped in 2.8 tires to deal with the slick mud and roots. When rain rolls in on race morning, these wheels and tires go on the bike. Not only that, you can lower the PSI and do some riding in the snow. In dry conditions, the Switchblade feels a bit more nimble vs the 29" wheels and the added grip will give you the confidence to push a little harder through turns and down steep descents. The wider rear tire with the DW Link offers insane traction on climbs. Despite the added weight of the + wheelset, short techy climbs are much easier when you don't have to worry about spinning out.
December 20, 2018
CONTINUED: 29 w/17mm cup: Pivot does not advocate for this setup, but a keen eye will notice many of their sponsored riders sporting the 17mm headset cup with 29” wheels. This cup is intended to bring the bottom bracket up and slacken the head tube angle when running the smaller 27.5+ wheels. During enduro season, I do swap wheelsets depending on conditions so I have a fair amount of time with the bike in this configuration. For dry enduro days or even park riding, this is the preferred setup. The longer wheel base and slacker head tube make the Switchblade an absolute beast descending. It’s super stable at speed, soaks up hits on the steeps, and corners amazingly well for the raised BB. I also enjoy the extra pedaling clearance from the raised BB through gnarly rock sessions as I find myself pedaling through many sections I would normally pump to put down a solid race run. The negatives of this setup include a front end that wants to wonder on climbs and the front will push a bit in corners if not weighted properly. Nothing you can’t handle if you get on the nose of the saddle and distribute your weight forward but it is noticeable once you’ve ridden the bike without the cup. On the bright side, the Switchblade is SOOOO easy to manual in this configuration. 29 (no cup): I believe this is how Pivot intended this bike to be ridden and this is how I’ve had my bike setup for the summer months (post enduro season, pre snow season). I’ve built up some NOX Composite wheels laced to Project 321 hubs and the weight of the bike (size large w/multitool, pedals, and cages) is right at 29lbs vs the 30lb 2oz with the carbon plus wheels and tires. It feels short, nimble, and quick which seems crazy to say when talking about a 150/135 travel 29er but again, Pivot nailed the geo and made me realize a 29er can be FUN. The low bottom bracket allows it to change direction quickly, whipping back and forth through the forest with easy. With the crazy stiff frame, you’ll be holding your line in high speed berms or shralping on demand. The front end is planted on climbs, but with the short chain stays, easy to lean back and lift to put your front wheel exactly where you need it when things get techy. Going down it’s an all out baller soaking up chunder, maintaining your line choice, and baiting you into choosing features or lines you may otherwise go around or walk. The Switchblade has good manners in the air and feels bottomless on the landings. I have noticed a bit more pedal strikes in this configuration but coming from a Gen 1 5010, I’m pretty used to ultra low bottom brackets and positioning my pedals accordingly to avoid strikes. In short, the Switchblade is the complete package, my quiver killer. Highly versatile with the ability to swap wheels, change geometry, and it absolutely shreds in every configuration. I do everything from all day XC epics to enduro racing to bike park riding on it and it's capabilities impress me almost every time I spin the cranks. To replace this bike, I’d need a 429 Trail and a Firebird 29. My mind tells me I should, but my heart won’t let me let go of my Switchblade.