Park ToolBBT-9 Hollowtech II Bottom Bracket Tool
Item # PAR0066
- 100% Guaranteed Returns
-
Free Shipping on orders over $50
Don’t break a sweat; use the BBT-9.
This is Park's shop-quality tool for installing your Shimano 10-speed Hollowtech II bottom bracket cups. It's long enough to give you adequate leverage for installing the cups with the force you need. The precisely shaped metal teeth of the BBT-9 won't damage the teeth on your BB cups provided you use it with care. The small end of the BBT-9 has what looks like a plastic wheel on it. This is actually, the splined plastic tool that you'll need for the spindle bolt to preload the bearings on your Hollowtech crankset. Otherwise, the Park Tool BBT-9 is compatible with Shimano Hollowtech II, FSA Mega Exo, SRAM GXP, and most other external bearing bottom bracket cups.
- Get the leverage you need for your Hollowtech BB
- Long bar makes easy work of installing BB cups
- Precisely shaped teeth won't damage your bottom bracket
- Splined wheel preloads your BB bearings on crank
- Compatible with Hollowtech II, FSA Mega Exo, SRAM GXP
California Proposition 65
Warning:
What do you think about this product?
View
March 29, 2019
Ideal tool
- Familiarity:
- I've put it through the wringer
This is a great tool. Sits flat with the notches on the lockring so that it doesn't strip. In that regard it's better than a socket and a torque wrench. The length allows you to get to that common 40Nm pretty east and doubt you could wear this tool out.
DJ Redundant II
March 28, 2019
Does the Job
This is the tool you need for centerlock rotors with the through axle lockring. Fits the splines perfectly and has a secure fit.
Aaron Bender
December 31, 2018
Tool does what it's meant to do
- Familiarity:
- I've used it several times
I've used this tool on several bikes and have been pleased with it. I look forward to having it around the garage for years to come.
Joe Guttenplan
October 2, 2018
Another Solid Tool
- Familiarity:
- I've put it through the wringer
I think its pretty safe to say that you cannot go wrong with Park Tool's tools. There is a reason they are ubiquitous. They are high quality, and in this case multi functional as well
Craig L
August 13, 2018
What you need for those CL rotors
- Familiarity:
- I've put it through the wringer
Should probably be sitting around in every bike rider's garage because at some point you're going to run into center lock rotors and you're going to need to replace them! I don't have much preference between this or another brand's Hollowtech BB tool but this one from Park has worked well for me!
Jacob Dudek
August 12, 2018
BB/Rotor Tool w/a Bonus
- Familiarity:
- I've used it several times
I use the Chris King BB tool for my threaded bottom bracket but it isn't deep enough to clear the end cap on my i9 superboost hub so picked up this BBT-9 to change out centerlock rotors. Another great tool and the shimano crank pre-load removal tool on the opposite end is a nice bonus.
Derrick Smith
June 24, 2018
lockrings
works with shimano centerlock rotor lockrings for 12/15/20mm axles. 16 notch
johngchrist
June 4, 2018
Works perfectly
- Familiarity:
- I've used it several times
Made changing out that bottom bracket nice and easy!
Daniel Goodman
March 31, 2018
Great Versatility
- Familiarity:
- I've used it several times
Park Tools always delivers with quality, which is what I expected. Works for various BB cups, but I use the tool for installing & removing my DT Swiss centerlock brake rotor lockrings.
JT Nebeker
January 11, 2018
great multi purpose tool.
- Familiarity:
- I've used it several times
this is a great quality tool that comes in handy quite a bit. it works for center lock rotors and threaded bottom brackets. I am glad that I own one.
max cowley
December 19, 2017
Solid
- Familiarity:
- I've used it several times
Quality tool from park tool, will you easily remove/install your threaded BB cups with plenty of leverage!
Renzo B
November 14, 2017
Does this tool work with ultegra 6800 11 speed crankset?
Randall G.
June 26, 2016
Changing out your chainring?
Going to want this in your shop apron.
Jonathan Wilson
March 6, 2016
You'll need this tool
If you have threaded bottom brackets on you mountain bike or dirt jumper and shims no cranks this tool is perfect
John Bamford
December 17, 2015
Great Tool
- Familiarity:
- I've put it through the wringer
This is a great tool designed to remove BB cups without any problems. It was easy to use, fitted perfectly and gave plenty of leverage to undo my bottom bracket. The new bottom bracket went in just as easy. Overall I would buy the same tool again, making removal and refitting of BB an easy job for anyone. Please keep in mind that this BBT-9 works with external bearing bottom brackets, including: Chris King, SRAM, Truvativ, Race Face , Chris King and Opens Cannondale Lefty forks
Trevor J
September 13, 2015
you get everything you need
- Familiarity:
- I've used it several times
this tool is amazing, you two tools in one. so you will not be needing to purchase multiple tools. so pick this up so you can take off your bottom bracket!
jordan
July 20, 2015
must have!
You can't own a bike and not have one of these babies. It will pull the cups off of your bottom bracket with no problem at all!
Justin Henderson
January 27, 2015
Tool for the Job
- Familiarity:
- I've put it through the wringer
Everything you need to install a Shimano BB and crank.
Chad Cordell
May 14, 2014
is this compatible with da bb9000?
is this compatible with da bb9000?
Roger P.
Dan Dalton
May 14, 2014
Yes, This tool works with all external threaded BB's, including the Dura-ace 9000 bottom bracket. ddalton@backcountry.com
December 13, 2013
Works as expected
Good product/tool. Works as expected.
Steve Whipple
Steven Sheffield
January 6, 2018
It most certainly will. It will also remove the lock rings on many centerlock brake rotors (and the ones that it won't can be removed with a standard Shimano cassette lockring tool).