Ride Essentials At 20% Off Or More - Shop Today’s Deal
This carousel displays a list of buttons that updates the main product image when a button is clicked
  • Options
  • Detail Images

OneUp ComponentsEDC Tap Kit


Item # OUC000L

Select options
  • Cancel
  • Select options
  • One Color, One Size ($35.50)
Add Protect+ Powered by Extend™
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # OUC000L

DIY threading for the EDC Tool System.

After gaining a glimpse of the ingenious steer tube storage of the EDC Tool System, you've convinced yourself that you're ready to ditch wearing a pack in favor of this slick tool kit. However, you'll need to pick up the EDC Tap Kit by OneUp Components before you install the EDC Tool System inside your fork's steer tube. The Tap Kit contains everything you need to thread the inside of your fork's steer tube, allowing the EDC Tool System to harmoniously nest inside.

Please note, you'll need to check OneUp Component's website for compatibility with your current fork, just to be on the safe side before threading the inside of its steer tube. This kit contains a Go-No-Go gauge that determines if your fork's steer tube is compatible with the EDC Tool System, indicating it's ready to go if the first section of the Go-No-Go gauge slides inside your steer tube, but the second section does not.

Furthermore, this kit contains a Starnut Puller and Puller Bolt for removing the starnut, as well as the Tap Guide and Tap for threading the inside of the steer tube. The Tap Guide and Tap perfectly thread the inside of your fork's steer tube, requiring you to thread the full 8 millimeters before the Tap bottoms out on the Tap Guide, preventing it from going any further. Besides using this EDC Tap Kit, you'll need to separately purchase the EDC Top Cap Kit, which contains the specific top cap and steerer plug necessary for installation.

  • DIY Tap Kit for installation of the EDC Tool System
  • Go-No-Go gauge determines compatibility before threading
  • Starnut puller and puller bolt for removing the starnut
  • Tap and Tap Guide thread 8mm inside of fork steer tube
  • Separate EDC Top Cap Kit is required for installation

Tech Specs
Recommended Usebike maintenance
Manufacturer Warranty1 year

What do you think about this product?


>Rating: 5

Tap Tap It In

I've used it several times

This is a great lil high quality tap to kick off your EDC setup. Once you have switched over to using the EDC system, this is a great tool to have in your box as you will likely be using on all of your bikes currently or down the road. You will also be owed several beers by all your riding buddies if you own this tap as they will all want to borrow it!

>Rating: 5

Good Stuff

I've used it once or twice and have initial impressions

Super easy to use. Wiped away a ton of frustration I thought I'd have to deal with.

>Rating: 4

It works well!

I've used it several times

This cuts threads into the steer tube of your fork so you can install a oneup EDC tool. It works well, and the guide keeps the tap lined up straight. Tap itself seems like high quality and will last well as long as its used properly.