This carousel displays a list of buttons that updates the main product image when a button is clicked
  • Options

MavicXD Driver

Sale 25% Off$74.96 $99.95

Item # MAV0521

Select options
  • Cancel
  • Select options
  • Black, ITS-4 ($74.96)
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # MAV0521

Take your Mavic to 11.

SRAM's refreshing update to the archaic mountain bike drivetrain is undeniable, but it does require one specific part in order to be compatible with traditional hubs -- the freehub body itself. This Mavic XD Driver will convert 2012 and newer Crossmax and Deemax wheels for use with SRAM XX1 cassettes.

All you have to do is remove the end caps and traditional freehub, and then swap the pawls and springs to the XD Driver. The Mavic XD Driver includes new XD end caps, as well as the driver itself.

  • Compatible with SRAM's 10-42t 11-speed cassette
  • For use with Mavic Crossroc, Crossride, Crossmax, and Deemax wheels (2012 and newer)
  • Two different options: XD TS-2 (Crossroc, Crossride), XD ITS-4 (Crossmax, Deemax)
  • Includes XD end caps and driver

Tech Specs
Recommended Use
Manufacturer Warranty
2 years

Actual Weight

Actual weights are measured in-house by the Competitive Cyclist team.

Have questions? Chat with a Gearhead



Black, ITS-4

View more Wheel Small Parts

    What do you think about this product?


    >Rating: 5

    Great find

    I've used it once or twice and have initial impressions

    Happy to have found this. Made it possible to get an SRAM eagle setup on my Mavic crossRoc rims. Installation instructions for DIYers were sketchy. If doing DIY you will need freehub oil so order along with this.

    >Rating: 5

    If you need to switch from Shimano

    It's great to know Mavic allows you to convert the hub, and saves you the money from buying a complete new set of hubs. Works great.


    This XD Driver works with Mavic Crossmax Elite 29er, 2017 and Sram GX 12 Speed cassette 10-50


    Hi will it work on xl crossmax29

    >Rating: 5

    Mavic XD Freebody

    I've used it once or twice and have initial impressions

    Easy to install and the directions are very clear.

    I'm pretty sure if I get this I'll be able to run the newer 1 x 12 sram cassette on my Cannonade Lefty FSi, not sure what Mavic rims I have exactly... but they're carbon. I thought I was going to have to get a new hub until I saw this option. Hopefully this works...

    >Rating: 5

    Mavic XD Driver

    I've put it through the wringer

    I use the ITS4 to run XO1 on my crossmax enduro wheelset. High quality and the swap was super easy. Great product for running 1x11 on your Mavic wheelset.

    >Rating: 4

    Switch a roo

    I've put it through the wringer

    It's really nice that Mavic offers such a simple swap so you can keep the second most expensive part of your bike while upgrading parts. The instructions not very clear but I was able to get the job done. Here's the only complaint, making this 4 instead of 5 start. When swapping there are four TINY springs you must move from the old freehub body to this one. If you loose even one on the garage floor you are screwed. I doubt local bike shops would have any stocked, you might get lucky in their junk drawer though. So -- execution is simple but go into your "clean room so you don't loose a spring.

    Good tip


    I bought the ts2 version for my crossride wheels it there are no instructions included or seemingly clear resources online. I am not clear on how to remove the current freehub in order to replace. I'm sure it's simple but I don't want to damage the assembly. Any guidance?

    >Rating: 4

    TS2 vs. ITS4 variants.

    I've put it through the wringer

    The TS2 variant only works with the CrossRoc wheels from Mavic, while the ITS4 works with the Crossmax wheel line.


    What size axle does this work with?

    This will work with the 12x142mm and the standard 135mm QR set up. Different endcaps are used on Mavic wheels between the various axle configurations.


    Will this work with an XO1 set up?

    Yes it will.


    will this work on 29" mavic crossride wheels?

    Hey there, this will work on your 29" Mavic Crossride Wheels allowing you to run a SRAM 11 speed mountain cassette.

    Only if you get the TS-2 driver body.

    >Rating: 5

    Easy to Install

    I've used it several times

    I followed the instructions provided and had it on my Mavic Crossmax SLR in less than 5 minutes. It holds my XX1 cassette securely and without any issues.

    >Rating: 4

    Easy installation

    I've put it through the wringer

    The xx1 conversion is very simple with this hub. It also sounds fantastic.