How to Assemble your New Mountain Bike
Here at Competitive we take great care in assembling and packaging your new bike so when you receive it, the bike is in pristine condition and can be safely ridden with just a few minutes of simple wrenching.
Before we get it ready to ship, our experienced mechanics make sure that the braking and shifting are dialed in, the headset and bottom bracket are installed correctly and we double check the bolts and tighten them to their precise torque specs.
From there we remove the handlebars, seatpost and wheels to pack the bike for shipping. We use protective cardboard and zip ties to ensure the frame and components are secure enough so they don’t rub against each other during the shipping process.
When you receive your new bike you will only need a few tools to assemble it:
- A knife to cut through the tape on the box
- A pair of cutters to snap the zip ties
- A 5Nm torque wrench and a simple multi tool to reassemble your bike
Before you pull your bike out of the box you’ll notice a plastic folder that contains all of the documentation regarding your new bike as well as our quality control checklist. This is important to keep because it includes all of your serial numbers. We also attach this document with your order electronically so we have a permanent copy here at Competitive Cyclist.
First we’ll pull the wheels out of the box and carefully remove the black hub protectors.
As you remove these PLEASE make sure you don’t pull off one of the washers from your hub.
The rear skewer, if you can’t find it, will be attached to your frame inside of a cardboard sleeve, we do this to protect the rear triangle.
The front skewer is attached the fork in the same fashion.
Then, using the shipping box as a base, place the frame on top of it and carefully remove all of the frame wrap and zip ties.
Once that’s done, put your bars in the stem and tighten the faceplate using your multi tool.
If you’re using a carbon bar or stem make sure you follow the torque specs that are in included in the documentation.
Next, put the wheels on which will make fine tuning the seatpost and handlebar angle a little easier.
After that install and tighten the seatpost to your desired height, making sure you don’t over tighten the seatpost collar.
From there you can put your pedals on and go for a ride.
Thank you for purchasing your new bike from Competitive Cyclist.
If you have any questions about assembling your new bike feel free to Chat or call Competitive Cyclist at #1.888.276.7030
Still shopping for your new bike and not sure what size frame you need? Check out our Fit Calculator.