Shop Black Friday Selects

Knight 95 Carbon Fibre/DT Swiss 240S Ready-to-Ride Wheelset

Knight 95 Carbon Fibre/DT Swiss 240S Ready-to-Ride Wheelset

Item # KNI0009

Select options
  • Select options
  • Black/Black, 700x23c, 11-25t ($2,899.00)
  • Black/Black, 700x25c, 11-25t ($2,899.00)
  • Black/Black, 700x23c, 11-28t ($2,899.00)
  • Black/Black, 700x25c, 11-28t ($2,899.00)
  • 100% Guaranteed Returns
Item # KNI0009


Roll faster.

As a brand, Knight Composites is relatively new to cycling. However, its design team boasts a history well-versed in top-end, aerodynamic, carbon race wheel construction and the 95 Carbon Fibre features claimed wind tunnel numbers that suggest this may be one of the fastest wheels out there. As implied in the title, the Knight 95 Carbon Fibre/DT Swiss 240S Ready-to-Ride Wheelset is ready to ride right out of the box, spinning on buttery smooth DT Swiss 240S hubs and outfitted with Continental GP 4000s II tires — with Q-Tubes included — and an 11-25 or 11-28t SRAM PG-1170 cassette.

The Knight 95's impressive aerodynamic benefits top out at 15 degrees of yaw while traveling at 30mph with a claimed -112g of drag force. That's right, negative. The effect of this negative contribution is a claimed savings of 22.5 seconds over 40km when compared to its most aerodynamically-gifted competitor. Just by changing wheels. To put that in perspective, riding the Knight 95 could very well have put Fignon atop the final podium of the closest Tour ever.

Of course, unless you have the engine of a Fignon (or a LeMond, for that matter), 30mph is a bit excessive over the course of a long event, but those advantages also trickle down to speeds in the mid-20s, so the 95s actually help propel you forward once you've spun them up. The inclusion of DT Swiss' smooth 240s hubs also goes some way toward countering the deep rims' increased rotational mass, meaning that you'll hit those cruising speeds faster and with less internal friction.

To achieve these almost comical test numbers, Knight developed what it's calling Trailing Edge Aerodynamic Manipulation Technology (TEAM Tech), which reinvents the aerodynamics of the wheel by shifting the focus from the leading to the trailing edge. This change in focus helped Knight design wheels as part of a bicycle-wide system of aerodynamics that includes tires, rims, fork, and frame. This system began with Computational Fluid Dynamics software, proceeded through no fewer than two rounds of wind tunnel testing, and ate up hundreds of test models.

The result of the laborious TEAM Tech process is a cross-section that describes a tapered parabola rather than the sharp point of a NACA airfoil or the overly-rounded "U" shape of wheels that are dominating the market today — and that Knight's founders were instrumental in creating. This new shape meets TEAM Tech's mandate by gradually widening airflow across the rim, which swells to 28mm at the widest point. This rim shape helps air transition in stability from tire to rim to down tube in order to minimize the drag caused by pockets of stalled air in the wake of the bicycle system's separate components.

Aerodynamics aside, safety is also a serious concern for any serious cyclist, and the Knight 95 doesn't disappoint. The rims are built from aerospace-grade Toray carbon fiber and subjected to testing of 12 different protocols — ranging from brake track failure to durability under impact — that exceed the CEN standards for safety, helping to ensure that the aerodynamic gains aren't undone by an untimely failure.

Tech Specs

Rim Material:
Toray carbon fiber
Wheel Size:
700 c
Tire Type:
Rim Depth:
95 mm
Rim Width:
28.25 mm
Brake Compatibility:
DT Swiss 240S
Spoke Count:
[front] 16, [rear] 20
Claimed Weight:
[set, without cassette or tires] 1,824 g
Recommended Use:
road cycling, time trial, triathlon
Manufacturer Warranty:
5 years

Reviews & Community


Write a review

    Add a:
  • Photos
  • Videos

No file chosen

Rather attach a photo from your computer?


Only jpg, jpeg, png, gif or bmp files please.

Submit ReviewCancel