Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help
Earn Rewards
  • Just In
  • Learn

Ibis
Ripmo XTR Mountain Bike

Be the first to review

Out of Stock

Don't worry though, we have a lot more All-Mountain & Trail in stock than that.

Shop Similar Products

Ripmo XTR Mountain Bike

When Ibis released the Ripmo AF, we figured it wouldn't be long before the carbon Ripmo saw the same updates, which amplify the bike's descending prowess without sacrificing its best-in-class climbing performance that garnered universal praise across the industry. We're happy to announce we were right. The Ripmo V2 is finally here, giving riders the increased capability of the Ripmo AF, but with a carbon frame that saves roughly 2lb over the aluminum version—all while offering a stiffer chassis that climbs, corners, and charges harder.


Like the Ripmo, the Ripmo V2 was developed under the rigors of competition, meaning Ibis worked extensively with their professional riders to ensure the new bike meets the increasing demands of modern enduro courses. A disguised version of the Ripmo V2 saw four top-ten finishes in the 2019 EWS, already proving its success at the highest level of the sport.


The new recipe starts with a more progressive shock rate that ramps up near the end of the stroke, preventing harsh bottom-outs when you're charging through rock gardens and airing over drops. At the same time, the initial stroke is suppler to improve small-bump sensitivity and smooth out chattery sections of trail. Downhill enthusiasts will be pleased to know that the new bike is now compatible with coil shocks thanks to this revised shock rate.


Ibis nailed the geometry on the first Ripmo, so the V2 only sees minor tweaks to give the bike some extra stability when the trail points downhill. This comes in the form of a 1-degree slacker head tube angle, moving to 64.9-degrees compared to 65.9 on the original model. The reach is also increased by a few millimeters, rounding things off with a nicely modern 475mm on a size large. These numbers let you open it up a bit more on high-speed descents, but maintain the same lively handling and precise cornering the Ripmo was famous for.


Riding bikes isn't all downhill (unless you're a park rat or shuttle junky), so considering that most of us have to earn our turns, Ibis gives the Ripmo V2 the same uncanny climbing abilities as its predecessor. A lot of this has to do with the ultra-efficient DW-Link suspension platform, but a big part is the steep 76-degree seat tube angle that naturally shifts your weight forward in the saddle. This puts you in a comfortable position for putting power to the pedals, and keeps the front wheel from wandering on steep climbs. If you were to ride the Ripmo and Ripmo V2 back to back, you wouldn't notice any difference in pedaling performance despite the V2's more aggressive descending traits.


On the Ripmo V2 Ibis sticks with their esteemed DW-Link suspension due to its firm pedaling platform and smooth feel over rough terrain. Ibis did modify the suspension tune though, incorporating the Traction Tune philosophy that first debuted on the Mojo HD5. Traction Tune uses extra-light damping in the high-speed compression and rebound circuits, which allows the wheels to react more quickly to changes in terrain for smoother bump absorption and glued-to-the-ground traction. By balancing this effect front and rear, the bike chassis stays flat relative to the ground as the suspension cycles through its travel, keeping the geometry figures consistent for more predictable handling in rough terrain. Traction Tune is a feature that Ibis's team riders have been pushing for all along, but it ultimately provides benefits to riders of all skill levels.


As a new-age 29er all-mountain bike, the Ripmo V2 incorporates a host of useful features for the aggressive trail rider and enduro racer. New linkage guards protect the upper and lower links from contamination, while downtube and swingarm guards prevent damage to the carbon frame. There's enough tire clearance to run massive 2.6-inch rubber, internal cable tunnels for easier maintenance and routing, clearance for a full-size bottle, and the ability to run a 175-millimeter or longer dropper post on the medium through extra-large frames (small works with 150-millimeter droppers). Ibis uses IGUS bushings on the lower link for improved longevity over ball bearings, and backs them up with a lifetime warranty for good measure.


*Due to unprecedented demand in the global supply chain and the bike industry over the last 18 months, material weight and exact components are subject to change. We are working diligently to keep tech specs updated, and any adjustments will be minor. If you have any questions, reach out to a Gearhead by chatting online or calling 1-888-276-7130.


Details

  • The almighty Ripmo gets performance-enhancing updates
  • Carbon frame saves 2lb claimed weight over the Ripmo AF
  • More progressive 5.7in DW-Link suspension caters to hard-chargers
  • Slacker head tube angle lets you go faster on descents
  • Climbs as aggressively as the original Ripmo
  • 6in fork soaks up bigger hits with ease
  • Flagship build with Fox Factory suspension and XTR drivetrain
  • Item #IBSB06J
Frame Material
carbon fiber
Suspension
DW-Link
Rear Shock
Fox Float Factory X2 with EVOL
Rear Travel
147mm
Fork
Fox Float 36 Factory GRIP2, 44mm offset
Front Travel
160mm
Headset
Cane Creek 40 ZS44/ZS56
Shifters
Shimano XTR M9100
Rear Derailleur
Shimano XTR M9120, Shadow Plus
ISCG Tabs
ISCG-05 via optional removable adapter
Crankset
Race Face Next R Carbon
Chainring Sizes
32t
Bottom Bracket
Race Face
Cassette
Shimano XTR
Cassette Range
10 - 51t
Chain
Shimano XTR M9100
Brakeset
Shimano XTR M9120, 4-piston
Brake Type
hydraulic disc
Rotors
[front] 200mm Shimano RT-MT900, [rear] 180mm Shimano RT-MT900
Handlebar
ENVE M6 Carbon
Handlebar Width
780mm
Grips
Lizard Skins Charger Evo
Stem
ENVE MTN Carbon
Saddle
WTB Silverado Ti Rails
Seatpost
Bike Yoke Revive Dropper
Wheelset
Ibis S35 Carbon
Hubs
Industry Nine Hydra
Front Axle
15 x 110mm Boost
Rear Axle
12 x 148mm Boost
Tires
Maxxis Assegai EXO+ WT
Tire Size
29 x 2.5in
Pedals
not included
Extras
downtube protector, swingarm protector, lower link protector
Manufacturer Warranty
[frame] 7 years

What do you think about this product?

View

Selecting an option will reload the available reviews on the page

Sorry, we don’t currently have any of those types of reviews for this product.