- Detail Images
ENVESES 3.4 AR Disc Brake Wheelset - Tubeless
Item # ENV0088
What do you think about this product?
February 26, 2021
Is the front wheel compatible with a 15mm axle?
July 16, 2020
Not sure about these on the tarmac...
- I returned this product before using it
- 6` 2"
- 180 lbs
There are some specs missing from the typical locquatious write up and technical specs. These have an 80psi max - I realized after receiving them that I would be running them at or near the max with 28s all of the time on the road. I suspect these are really gravel wheels being marketed as ok for road, tri, etc. Second, they have hookless rims I believe. This means they won't be compatible with many tires - this wasn't really an issue for me but given the hot mess that road tubeless has become it would be great to see more relevant specs published. They also come unfinished in that the buyer has to install the tape to seal them up. There was a ton of carbon dust or something on the pair I received which I cleaned with damp rags before drying the rims and then finally using the supplied alcohol prep wipes. Applied tape carefully and all looked great! Mounted Conti GP5000 tubeless tires with no drama and pumped up to set the bead. Let them sit a bit per manual instruction to allow the internal pressure to conform the tape to the channel in the rim bed. After all this could not get them to hold air. Going up over 40 to 50 psi caused the tape to move around I think and air/sealant to blow out from the valve nut, meaning air was leaking into the rim. Disappointed to return them as they look beautiful and are light and seem very durable. I just think anyone planning on using these as road tubeless should be aware of the specs and limitations and maybe there are some tricks to get them to seal up that are not included in the instructions.
July 17, 2020
Thank you for your review. I’ll probably stick with Shimano or Zipp having read this!
September 23, 2020
Hey James- Did you reference the chart for the wheel/tire combination on the Enve site here? https://www.enve.com/tirepressure/ For your weight the recommended tire pressure for a 28mm tire on a 3.4 AR is 58 PSI. I’ll agree they can be a challenge to mount but I would recommend taking them up to your LBS and having them install if you have issues. I have a set of 3.4’s and 4.5’s and these are by far the best wheels I’ve owned on the road and gravel suited for whatever large volume tires you wanna run. Sorry it didn’t work for you on these, but there’s multiple pro teams riding the same wheels without problems including NTT in the TDF this year.
October 13, 2020
just a heads up, Conti 5000 TL's cannot be mounted on 3.4ar and 4.5ar wheel sets. Enve has said they are not compatible. as stated you dont need to run your PSI as high, at 175#, I run my Schwalbe pro One TLE 28's at 57 F, 59R on chip and seal roads and absolutely love these wheels (4.5AR's).
November 15, 2020
James, I have been using the 3.4AR and G23 with Schwalbe Pro One no issues. If you read the Enve tire compatibility chart it clearly states they don’t recommend the Continental GP5000 as they have not tested or completed their testing. That said, Enve is one of the few manufacturers that actually test rim and tire compatibility. To take it further they actually provide a tire pressure guide based on the riders weight, rim and tire. Furthermore regarding hookless rims this is a newer tech that many other manufacturers are developing and adding to their lineup do to tubeless tires. I personally have been riding tubeless tire setup for over 5 years and love the new hookless rims. I can run much lower tire pressure and almost zero flats. It’s important to note tubeless is not for everyone as you have to check tire pressure and add air each day. Plus you have to add sealant several times a year. One last thought Enve customer service is the gold standard. The have responded to me via telephone and email in a timely manner with solid solutions with tire compatibility and tire pressures. Best, CJ
July 7, 2020
Great All-Around Wheels
- I've used it several times
- True to size
- Size Bought
- 3.4 AR
- 5` 11"
- 175 lbs
I don't agree with the other review about mounting the tires. I have the 2020 Schwalbe tires (size 28) and didn't experience the difficulty in mounting the tires that is described in the other review. For me, mounting is tighter than ordinary clinchers with a tube but just requires putting the tire in the center channel and then using a tire lever for the last bit. As for the wheels themselves, I am really enjoying them. I went back and forth on these, debating whether or not to buy, but after having purchased them, I don't have any regrets. I love being able to run 28s that are aero optimized, and I really like riding at the lower tire pressures. I also think the wider rim feels more glued to the road, and I feel more confident on them. I have other wheels that are 50mm, and I don't feel that I am losing a lot of aero benefits with the lower depth. These are definitely good all-around wheels that can be used for a lot of different uses, which I like. I also really like that I don't feel that I have to worry about crosswinds at all with this depth. This is my first experience with road tubeless, and it has been an overall positive experience. I highly recommend these wheels if you are committed to riding tubeless or would like to have a do-everything set of wheels. If not, I imagine the other 3.4 SES are also quite good.
April 8, 2020
Is there a max rider weight limit on the Enve 3.4 AR disc - 24 spokes and carbon hoops doesn’t inspire the most confidence in an all road wheelset - thanks
December 4, 2019
Nice wheels but....
- I've put it through the wringer
Almost impossible to mount tires on these. Was barely able to get a set of cross tires on initially, and sealed up fine. After the season, I've tried mounting multiple road tires, tubeless and non and cannot for the life of me get them mounted. I've tried setting the bead in the channel, using powder and soap. Way too frustrating, and can't imagine being stuck on the side of the road with a flat and trying to repair. Good for cross, but the wide rims, make most tires too wide for UCI races.
April 23, 2020
Thanks for the heads-up about tire-mounting. I know how frustrating it is trying to mount a tight-fitting Tire--the fear alone of. damaging a $1300 Wheel is enough to make me think twice before buying. I wonder what ENVE has to say about this.
October 30, 2019
Would these wheels work well for CX or are they too wide? Would the 3.4 wheels (non AR) be better?