Free 2-Day Shipping on Orders Over $50
1-888-276-7130
Save 25% or More on Components
  • Cane Creek Helm 130 Boost Fork - 29in
  • Cane Creek Helm 130 Boost Fork - 29in Top
  • OptionsCane Creek -
  • Detail Images - Top
Cane CreekHelm 130 Boost Fork - 29in
$899.00

Item # CNE001O

Select options
  • Cancel
  • Select options
  • Gun Metal Grey, 51mm Offset, 15x110 ($899.00)
  • 100% Guaranteed Returns
  • Free 2-Day Shipping
    on orders over $50

Item # CNE001O
Description

Helm 130 Boost Fork

The Helm 130 Boost Fork represents Cane Creek's foray into the high-end fork market, and is designed for discerning riders wanting a stout, highly-adjustable alternative to the other big brands on the market. With 130mm of smooth travel and burly 35-millimeter stanchions, this fork is plush throughout its stroke and has a stiff chassis that delivers precise tracking in rough terrain, an ideal setup for aggressive riders challenging their limits on technical trails. One question we had in mind when we heard Cane Creek was entering the fork business is whether or not they'd implement a twin-tube damper like the one found on their acclaimed Double Barrel rear shocks, but after 5-years of development Cane Creek found that a mono-tube damper is more effective for ease of service, weight savings, and reliability reasons.

You might be wondering what separates this damper from others on the market if it uses a similar closed-cartridge design that's used throughout the industry for reasons of fade-free performance and low weight. Well, it mostly boils down to the damper tune that's been honed in-house on the dyno and by its crew of in-house rippers and sponsored riders. Cane Creek realizes that no two rides or riders are alike, so this damper gives you the wide-ranging ability to tune 10 and 17 clicks of high and low-speed compression, with an additional 10 positions of low-speed rebound adjustment so you can dial in the ride to your terrain, style, and weight. In addition, the air spring has independent positive and negative chambers that allow you to tune the fork for a super supple initial stroke, or for a more supportive overall ride quality.

While some brands used to offer dual-air chambers as a means of further adjustment and the ability to tweak how plush the fork felt off the top of its stroke, many have abandoned it in the name of simplicity and cost savings. We've been fans of it for years and are sad to see it go, so it's refreshing that Cane Creek decided to use independent positive and negative air chambers allowing the rider to adjust the pressure in each chamber by simply depressing a valve to equalize both chambers, then adding or removing pressure in the positive chamber with your shock pump to get the fork to its desired ride feel. While this is a little fiddlier set-up than forks with self-equalizing chambers, it's a welcome feature for the discerning rider wanting to fine-tune every last detail in their fork's operation.

The other advantage of using two dedicated air chambers is it affords the ability to use one air spring and through the use of travel-adjust spacers, the Helm 130 Boost Fork adjusts it's travel anywhere from 100 to 160 millimeters. This option gives riders leeway in adjusting the handling and geometry of their current build, or if you build up a shorter or longer travel rig down the road and want to take your fork with you.

Last but not least, the Helm 130 Boost Fork allows riders the ability to tinker with the progressiveness of the air spring by re-adjusting an indexed rod and its static piston assembly. Removing this assembly and adjusting the piston up or down effectively changes how the fork ramps up—all without adding volume spacers like you've come to expect with other forks. This gives you the ability to gain the progressive ramp-up desired for taking bigger hits and rallying across rock gardens without messing with volume spacers.

  • Cane Creek's foray into the high-end suspension fork market
  • 130mm of smooth travel that's easily adjustable from 100 - 160mm
  • Mono-tube damper for reliability and ease of service
  • 35mm stanchions and stiff chassis deliver precise tracking
  • Independent positive and negative air chambers for fine-tuning
  • 10/17 clicks of high/low-speed compression adjustment
  • 10 clicks of low-speed rebound adjustment
  • Accessory-free air volume adjustment
Tech SpecsWeight
Tech Specs
Travel
[stock] 130mm, [internal adjustments] 100 - 160mm
Stanchion Material
aluminum
Lower Material
magnesium
Crown Material
aluminum
Wheel Size
29in, 27.5+
Steer Tube Diameter
1 1/8 - 1 1/2in tapered
Stanchion Diameter
35mm
Rake
51mm
Spring Type
air
Damper
closed cartridge mono-tube design
Adjustability
[high-speed compression] 10 clicks, [low-speed compression] 17 clicks, [low-speed rebound] 10 clicks, [indexed internal travel adjust] 100 - 160mm, [indexed internal air volume adjust] 8 positions, [independent positive & negative air preload] 30 - 150 psi
Axle
D-Loc 15 x 110mm Boost thru-axle w/quick-release handle
Brake Compatibility
post-mount disc
Rotor Compatibility
[minimum rotor size] 180mm
Recommended Use
enduro, trail
Manufacturer Warranty
1 year
Weight

Claimed Weight

Claimed weights are provided by the vendor.

Have questions? Chat with a Gearhead

2080g

Reviews & Community

REVIEWS

Write a review

    Add a:
  • Photos
  • Videos

No file chosen

Rather attach a photo from your computer?

Familiarity:

Only jpg, jpeg, png, gif or bmp files please.

Submit ReviewCancel