Free 2-Day Shipping on Orders Over $50* — Limited Time Only

Yeti Cycles SB-66 Carbon Mountain Bike Frame

Out of Stock

Item # YTI0135

Don't worry though, we have a lot more All-Mountain & Trail in stock than that.

View Similar Products
Item # YTI0135


Taking the trail bike to uncharted levels, the six-inch (152mm) travel Yeti SB-66 Carbon Mountain Bike Frame expands on the quickly building, trail-dominating reputation of Yeti's Switch Technology suspension by adorning it with a weight-dropping and stiffness-enhancing carbon chassis. In fact, the hand-laid high modulus carbon front and rear triangles knock a whopping pound and a half off its aluminum counterpart -- and that's without sacrificing anything to the stiffness department. That's right, you're looking at a six pound (2.72kg), six-inch trail bike.

This is the first Yeti SB (Super Bike) series frame to feature collet-type pivot hardware, which ensures the correct bearing preload while protecting the structural integrity of the carbon fiber. Enduro Max angular contact bearings fill the bores and offer ultra-tight, flex-free tolerances while easily managing side loads that would send conventional cartridge bearings straight to the dump.

The heart of the SB line lies in the suspension design. Unlike multi-link systems, which require linkages packed in between the main triangle and rear triangle, Yeti's Switch Technology features an eccentric mechanism buried low in the frame-enabling super-short chain stays and a low center of gravity for lively handling. This compact eccentric continuously adjusts the lower pivot position for a rearward, small-bump-damping axle path while maintaining a firm, pedal-friendly platform. Towards the end of the suspension's travel, the eccentric rotates in the opposite direction for a responsive mid-stroke, and finally to the end position where the suspension becomes progressively stiffer to provide big hit absorption. Think efficient pedaling perfectly meshed with big hit capabilities.

Yeti SB-66 C DetailAside from the major drop in heft, updated bearings, and hardware, the SB-66 Carbon chassis is loaded with new-school features. The boys in Colorado provide the option to run a triple, double, or single ring with a chain guide thanks to removable ISCG tabs. There's also routing for a seat dropper post, a direct mount for the front derailleur, and it's only available for the stiffness enhancing 12x142mm thru-axle. A tapered inset head tube (ZS44/ZS56mm) ensures front-end precision and strength for long-travel forks. Yeti recommends a fork in the 150-160mm range (resulting in 67 or 66.5 degree head tube angle, respectively). If you're aiming to charge through the rough, then match your SB-66 C to a 160mm fork with oversized stanchions, but if you want an all-day backcountry machine, add a 150mm travel fork with 34mm sanctions for climbing ability and some weight reduction.

Like all factory-prepped Yetis, the SB-66 Carbon has its rear suspension motion controlled by the highly respected FOX FLOAT CTD Adjust. However, this isn't any run-of-the-mill FOX Float rear shock. Yeti has long worked closely with FOX Shox—including their jointly run World Cup mountain bike race team—so you can be assured that this factory-tuned Float CTD (equipped with a Kashima coated shock shaft for ultra smooth and durable out-of-the-box performance) is the perfect match to the SB-66 C.

The Yeti SB-66 Carbon Mountain Bike Frame is available in the color Raw Carbon with either Black, Grey, or Turquoise decals. It comes in four sizes from Small to X-Large. The SB-66 uses a High Direct mount for the front derailleur, a post mount rear disc, a 73mm English Bottom Bracket, and you'll need a 30.9mm seatpost.

US Yeti dealers are prohibited from shipping Yeti bicycles to any country other than Canada, Mexico or the US.

Tech Specs

Frame Material:
high-modulus carbon fiber
Switch Technology
Rear Shock:
FOX CTD Trail Adjust Kashima
Rear Travel:
152 mm
Head Tube Diameter:
ZS44/ZS56 zero stack tapered
Headset Included:
Bottom Bracket Type:
73 mm English
ISCG Tabs:
yes, removable ISCG mount
Cable Routing:
external, full-length housing
Front Derailleur Mount:
high direct mount
Derailleur Pull:
Compatible Components:
Shimano, SRAM
Seatpost Diameter:
30.9 mm
Seat Collar:
34.9 mm
Rear Axle:
12x142 mm thru-axle
Recommended Use:
all mountain
Manufacturer Warranty:
2 years on frame

sizing chart

Bike size by rider height


Geometry chart

Yeti Cycles

Geometry Chart


SB-66 Carbon
FOX 34 150mm Travel Fork

Seat Tube


Effective Top Tube


Stand Over

Head Tube


Head Tube Angle


Seat Tube Angle


Bottom Bracket Height




XS 14.8in 22.2in 27.0in 3.7in 66.7o 71.7o 13.5in 17.0in 43.1in
S 16.5in 23.2in 27.9in 4.9in 66.7o 71.7o 13.5in 17.0in 44.2in
M 18.0in 24.2in 28.3in 4.9in 66.7o 71.7o 13.5in 17.0in 45.2in
L 19.5in 25.2in 29.4in 5.5in 66.7o 71.7o 13.5in 17.0in 46.3in
XL 21.0in 25.9in 30.2in 6.3in 66.7o 71.7o 13.5in 17.0in 47.1in

Yeti Cycles SB-66 Carbon Geometry Chart

Reviews & Community


Write a review

    Add a:
  • Photos
  • Videos

No file chosen

Rather attach a photo from your computer?


Only jpg, jpeg, png, gif or bmp files please.

Submit ReviewCancel

Not worth it

  • Familiarity: I've put it through the wringer

I know this frame is out of stock and discontinued, but felt obligated to write a review. I have had the bike 6 months in North Carolina so I have about 500 miles on it already. This bike is very capable and great to ride but I have broken 2 rear triangles and every bearing in the bike is completely bad, $140 to replace them too. I rarely ride in the rain and when I wash my bike I use a gentle shower to rinse that is it. I do have to say Duncan in Warranty has been Great on helping me get the triangles. I do not recommend this bike even though it is great to ride, I will be looking to sell this bike soon because of this.

What is the frame weight.

six pound (2.72kg)

If you have any questions or want to palce an order please contact me directly. Cheers.

My number here is 801-736-6396 x 5630 or email

Best Bike EVER!

  • Familiarity: I've put it through the wringer

I bought this bike last summer and since then have ridden it all over Colorado and Utah. It simply is the best bike I have ever ridden. It climbs like a gecko and descends like a snow leopard on crack! It is a little extra work on the uphills but makes the downhills so worth it. If you truly enjoy riding then this bike is for you.

SB for Super Bike

  • Familiarity: I've used it several times

That bike is a killer. It's clearly the best bike I have ever ridden.

It climbs very well, without creating pedal bob, and it is a pleasure to ride down.

I wouldn't say it is a "quiet" bike", it doesn't translate a rough terrain into some gravel road. Instead you get a direct feel of the terrain, but in a good way, because you can feel the bike giving you grip on any terrain. Plus the suspension is quite progressive, so even on big impact, you keep control.

So to summerize, it is a bike I think is for people with a good level of fitness and skills, because it is a bike that shows his best when ridden hard. You'll probably find your limits before the one of the bike.

I'm 5'9 and I weight 135 pounds and I love my S frame.

SB for Super Bike

Are those 2013 Cobalt 3's?

The blue seems to match the turquoise well.

Those are 2012 iodine 3. But they are special edition for Canyon. And the cobalt blue is I believe a bit darker.

This one is the same as spank blue (and it is the picture that makes it look turquoise, but it isn't that perfect for real).

Love this bike

  • Familiarity: I've put it through the wringer

I have had the alloy version and recently upgraded to the carbon version. This bike seriously rips. It is an attention grabber on the trails as well. This bike climbs extremely efficiently and bombs downhill.

Who says 26in is dead?

  • Familiarity: I've used it several times


Love this bike! I was pedaling an "old school" 4-bar linkage bike before this (2010 Kona Dawg Deluxe) which sucked on the uphills with all the pedal-bob (even with pro pedal not too efficient), but was hard to beat on the downs as far as plushness. The SB-66C retains all the plush of the downhill with more responsiveness, destroys the climbs efficiently, and sheds considerable weight to boot. This bike BEGS to be ridden aggressively. It seems like the harder I ride it, the more efficient it is on the up and the down. If you're the type of person who likes to be their own chairlift and rides as fast as possible on the way up and down this is the bike for you. Love it!

I am 5'6 and 140lbs riding a size S frame. Fits perfect with a short stem (45-55mm).

Details on my build:

SB-66C Frame

Rock Shox Lyric R 160mm

Full XT drivetrain w/ Raceface NW 34t chainring up front/ 11-36t cassette rear

Easton Havoc bars (711mm wide I think..)

Stans Flow Evo rims on Hope Pro 2 hubs (142x12 rear, 20mm thru up front)

Nukeproof Ion pedals because I hate SPDs

2.35 Kenda Excavators for tires.

What a ride!

  • Familiarity: I've used it several times

I really don't know why YETI is dicontinuning the SB-66C? It's a brilliantly balanced bike. I climbes effortlessly and descends with confidence. If you're looking for a high quality do-it-all bike, get it while it's still availible.

I've had no issues what-so-ever. It's a joy to ride.

What a ride!


Is the SB66 Carbon a 2013 or 2014 model?

Is the SB66 Carbon a 2013 or 2014 model?

They're probably 2013 because the aluminum versions are 2013

2013 i have dont the research and calling yeti direct. as i need a new bike and want this in 26" yeti discontinued the 26" versions just like most companies and its a shame

This Bike Rocks

  • Familiarity: I've put it through the wringer

Great pedal platform, Switch eats up the down hills. The Fox CTD is an added bonus. Go with XT or XTR brakes. They are awesome. Been to Moab, Sedona and Western Nc on this bike. It takes it all.