Out of Stock
Item # TUF0007
This model is no longer in stock.
Don't worry though, we have a lot more Tire & Tube Accessories in stock than that.
Tufo Valve Extenders $0.00
Tufo brings your valves within reach.
Aerodynamic wheels are a godsend when it comes to speed. The reduction in wind drag is exponentially tied to your speed, and no one who's serious about training or racing would be caught dead without them on a ride that really counts. Nobody but nobody disputes their performance value, and in fact, the only criticism anyone would ever throw out there is how tough it is sometimes to air the darn things up. Whether you've got 25mm deep Mavic Ksyriums or 58mm deep Zipp 404s, it's all-too-common for air to leak out of the typical thread-on-the-outside style valve extenders. There are a number of solutions that range from tiny O-rings to the use of plumbers tape to seal the extender against the stem. However, if the stem has a removable core, the wrench flats pretty much ruin your chances of a good seal and you'll often hear "psssssssssssssssssst" as you attempt to pump up the tire. How much air goes out the leak and how much gets in the tire is anyone's guess.
Tufo brought innovative thinking to the flawed universe of valve extenders. Rather than threading on the outside of your tube's valve stem, with the Tufo extender you'll actually unthread your existing presta valve core, insert Tufo's extender, then thread the valve into the tip of the extender. You're literally building a seamless extension of your valve stem, so your days of leaks are over. It's a brilliant solution, especially for tubular tires.
The extenders are available in 10mm increments from 20 - 60mm. Add this length to the length of your existing valve and you'll know how long the valve will ultimately be. Two notes: (1) These extenders are compatible only with clincher tubes and tubular tires that have removable valve cores. Based on our research, every tube and tire we sell is compatible except for Michelin's clincher tube. (2) The extender is built with tiny wrench flats built to work with Tufo's valve tool. We sell this tool, and it costs just a couple of dollars. Do yourself a favor and buy the Tufo tool along with the extenders. It'll ease the installation process.
These extenders are sold per extender, so please buy two to equip a set of wheels.
Reviews & Community
WHat is the correct length extention for...
WHat is the correct length extention for a Zipp 303 rim ?
Zipp suggests 33mm (1.3in) for 303's.
Are these extenders only compatible with...
Are these extenders only compatible with Tufo tires?
No, they will screw on to any presta valve with threads.I'll add, that while these work pretty well the best is to replace the whole valve core with a longer one, if the valve core can be removed. That method just provides a better seal.
Removable valve cores are the prerequisite to use Tufo valve extenders. The threaded end of the pictured Tufo extender threads into where the core was in the valve stem. Then the core threads into the extender. This solution is the best compared to Topeak or Problem solvers or others cause the Tufo is actually just extending the stem. The others leave the original valve core in place.