Free Podium Mesh Base Layer With Louis Garneau Mondo Primo Jersey or Bibs »

Stan's NoTubes ZTR Crest 29in Wheelset - Discontinued Decal

Temporarily Out Of Stock

Item # SNT0022

Don't get too bummed. This item is on the way and will be available for purchase as soon as it rolls into the warehouse.

Item # SNT0022

Light and reliable.

While the ZTR Race Gold is Stan's lightest offering, at 230g more, the Crest 29in Wheelset offers the strength and reliability long-distance racers and XC riders demand. Using Stan's 3.30 hubs, double-butted spokes, and Crest rims, this wheelset offers the low rotational weight, and tire-enhancing volume Stan's rims have become respected for.

Stan's has been at the forefront of the 29er movement, offering some of the most desirable rims on the market. Aside from Stan's award winning sealant, what has put the little company from NY on the map is it's Bead Socket Technology. In a nut shell, BST rims have a larger inner diameter to seal against tire beads for simpler tubeless inflation, and a lower rim sidewall that reduces stored energy, that allows lower pressures, a more natural, rounder shape, and increased volume.

In fact, Stan's BST rims allow riders to run approximately 30% less pressure than conventional rims. This directly translates into enhanced traction when climbing, descending, and turning -- along with a more supple ride and lower rolling resistance. With these virtues, it's clear to see why Stan's rims are almost omnipresent on race courses and trail heads alike.

The BST equipped ZTR Crest rim is laced to a Stan's 3.30 hubset. The hubs house smooth-spinning chromoly cartridge bearings that ride on a lightweight 7075 alloy axles. The rear hub body features large, 58mm flanges. The driveside houses a hardened 30-point engagement ring, while the non-driveside is machined to reduce weight. The front hub gets a 58mm disc-side hub, with a smaller, 45mm flange on the non-disc side to balance strength and weight.

The freehub is aluminum and it's compatible with Shimano and SRAM cassettes. The Stan's ZTR Crest 29in Wheelset is laced with 2.0/1.7/2.0 butted steel spokes and alloy nipples. It comes with Stan's rim tape and valve stems installed for instant use -- just add tires, sealant, and air. The front hub has a 9mm axle, but it can be converted with Stan's included 15mm conversion kit. The ZTR Crest 29in Wheelset has a rider weight limit of 190lbs.

Tech Specs

Front Axle:
15mm thru-axle
Hubs:
Stan's 3.30 QR
Wheel Size:
29 in
Spoke Nipple:
alloy
Rear Axle:
10x135 mm quick-release
Brake Compatibility:
6-bolt disc
Rim Material:
aluminum
Tire Type:
tubeless
Rim Depth:
15.8 mm
Recommended Use:
all-mountain
Manufacturer Warranty:
1 year
Spokes:
butted
Rim Width:
[external] 24.4 mm

Reviews & Community

What do you think of the

Stan's NoTubes ZTR Crest 29in Wheelset - Discontinued Decal

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video

Familiarity:

Only jpg, jpeg, png, gif or bmp files please.

Submit Cancel

Here's what others have to say...

3 5

Cheap, light.. not strong

  • Familiarity: I've put it through the wringer

You've heard the saying, "Cheap, light, strong. Pick two. "
If you're going for cheap and light, then you can't go wrong with this wheel set.
I had read about the Crests being flimsy, but I put it off to people having bad luck. Mine were trashed after 5 months of riding, and I can say I was happy when I got my new wheels. These would be good if you're below 150, but I think the Arch Ex would be a better choice for anyone over 165.

Responded on

True dat ! Crest is for the little people. I have the Arch ex and have bashed them for over 2,000 mountain miles. I weigh 180 if that helps.

Responded on

As a XC wheelset I'd put the Crest in the very reliable category.