Out of Stock
Item # SNT001D
Don't worry though, we have a lot more 27.5" Mountain Bike Wheels - Tubeless in stock than that.View Similar Products
Stan's NoTubes ZTR Crest 27.5in Wheelset $0.00
For years, Stan's NoTubes has set the standard for tubeless wheel design and functionality, churning out bombproof wheelsets boasting impeccable bead seating and tubeless reliability. Check out a local race or turn on the live feed for a World Cup event, and you're bound to see wheels such as the ZTR Crest 27.5in Wheelset zooming across the course. Built to roll light and fast, these wheels will tackle any cross-country course with ease.
This wheelset utilizes Stan's trademark Bead Socket Technology (BST), which features low profile sidewalls that provide a better seat for the tire bead and allow for a heap of benefits compared to standard rims with higher sidewalls. When setup as tubeless, BST provides an exceptional seal while allowing the tire to hold a greater volume of air than standard rims that place the bead 2-4mm below the edge. This interface lets the tire maintain its full shape for a wider, more stable rolling platform than if the same tire were mounted on a standard rim.
When BST is paired with the ability to run up to 30% lower air pressure than a standard clincher, the results are exceptional tire stability, better handling, solid cornering, and better overall control out on the course. These rims are also compatible with standard tubes, with the lower sidewall drastically reducing pinch flat risk by reducing the amount of material present for the tube to pinch against. This means less time running to the pit with a flat and more time battling for position out on the course.
Stan's laces the Crest rims to its own 3.30 hub set, which features smooth-spinning chromoly cartridge bearings and lightweight, 7075 alloy axles. The rear hub body boasts beefy 58mm flanges, while the driveside houses a hardened, 30-point engagement ring. At the front, a similarly beefy 58mm disc-side flange manages braking force while a 45mm flange on the non-disc side balances strength and weight. The aluminum XX1 XD freehub is compatible with SRAM XX1 cassettes.
The Stan's NoTubes ZTR Crest 27.5in Wheelset comes complete with Stan's yellow rim tape and valves already installed for tubeless use — just add your favorite tubeless-ready tire, sealant, and air. It's available with either a QR/15mm front and 142 x 12mm rear combination or QR/15mm front and 135 x 10mm QR rear combination. Please note that the ZTR Crest 27.5in Wheelset has a maximum recommended rider weight of 190lbs.
View more 27.5" Mountain Bike Wheels - Tubeless
Reviews & Community
Hi Ben - my wheelset was delivered today. Contrary to your answer to my previous question, it actually did not come with an XD driver for SRAM 11-speed. I ordered the wheelset based on the expectation that it would come with an XD driver, so I'm unsatisfied. How should we resolve this situation?
Edit - they are correcting the mixup and shipping an XD driver out to me.
Apologies for the mixup and the late followup.
Glad that you were taken care of, I'll be giving you a call to make sure everything is all set.
Again, my apologies for the incorrect information.
Wheelset are light and fast
- Familiarity:I've put it through the wringer
I used this on my Son's bike with Racing Ralph Lite Skin and it makes a world of different took 2.75 lbs off of his bike with these wheels, tires and XT 11.36 Cog. I also have a pair on my 29er Cannondale Trigger 1 and they work perfectly for the last 2 years. Riding Style, fast switch back single track, downhill with uphill and the occasional road ride. Awesome wheelset
Thanks Ben. Do this come with everything I need to run sram 11-speed, or do I purchase a separate "driver?" Thanks
Trying to understand, is this for a 15mm thru axle on the front? Thank you!
This has hub endcaps for a 9mm QR or a 15mm thru axle.