Stan's NoTubes

Crest 29in Boost Wheelset

The Stan's NoTubes Crest 29in Boost Wheelset brings Stan's renowned tubeless reliability to a cross-county platform built with Boost hubs to roll fast and shred the trail. Boasting lightweight rims and hard hit durability, these wheel spin up fast off the line and will weather the bumps to deliver you to the line flat-free.

The Crests utilize Stan's trademark Bead Socket Technology (BST), featuring low profile sidewalls that provide a better tire bead seat and allow for a host of benefits compared to standard rims with higher sidewalls. When setup as tubeless, BST provides an exceptional seal and allows the tire to hold more air volume in contrast to standard rims that hold the bead and extra 2-4mm below the edge. With BST, the tire maintains its full shape for a wider, more stable rolling platform than if the same tire were mounted on a standard rim.

Pairing BST features with the lower air pressure required by tubeless systems results in exceptional tire stability, better handling, solid cornering, and improved control. These rims are also compatible with standard tubes, with the lower sidewall drastically reducing pinch flat risk by reducing the amount of protruding material for the tube to pinch against. This means less time sitting in the dirt wrestling with a flat at the side of the trail and more time out on your favorite loops.

Stan's laces the Crest rims to its new Neo hub set, which features smooth-spinning, oversized chrome bearings that glide on a stiff, strong, swaged axle. The Neo Boost hubs hold the bearings at a wider stance than the normal Neo hubs, netting stiffness far beyond the usual threefold increase in strength compared to standard hub designs. It boasts four precision pawls that simultaneously engage a forged steel 36t ratchet ring for snappy engagement that. Stan's incorporates its new SealLock end caps for easy installation and Slip-Fit axle ends for easy conversion.

The Stan's NoTubes Crest 29in Boost Wheelset comes complete with Stan's yellow rim tape and valves already installed for tubeless. It's available with a 15 x 110mm Boost front axle and a 148 x 12mm Boost rear axle combination with either a Shimano/SRAM or SRAM XD freehub.