Out of Stock
Item # SRM0554
Don't worry though, we have a lot more Mountain Rear Derailleurs in stock than that.View Similar Products
SRAM X01 Rear Derailleur $0.00
Products like SRAM's X01 Rear Derailleur are the perfect example of positive evolution from healthy competition. Without it, wildlife would still be exposed to strings of expletives every time that a chain drops or a chainstay gets slapped.
Not to mention that we'd still be lugging around defunct front derailleurs, shifters, and chainrings. Technical advancements are a wonderful thing, and what started with the XX1 groupset is now spreading into the more affordable X01 line. This means that you'll find the same XX1 technologies, like the venerable X-HORIZON design, that reduce ghost shifting. Additionally, you'll also find SRAM's Roller Bearing Clutch that decreases chain-slap, and its Cage Lock technology that makes removing and replacing the rear wheel a breeze.
X-HORIZON is unlike typical derailleurs, where the knuckle only moves side-to-side, not up-and-down. This limits the movement to the horizontal axis, making ghost shifting nonexistent. An offset upper-pulley wheel is also unusual in its design, but it provides a constant chain-gap through all gear ratios. And with the combination of the X-SYNC chainring, pulley wheels, and a Roller Bearing Clutch, a chain guide isn't needed with X01. In fact, the chain is tensioned with the derailleur and locked in place with the pulleys and chainring, effectively making dropped chains and missed shifts things of the past.
The Cage Lock technology on the X-HORIZON derailleur adds convenience to your bike maintenance, too. While either installing a new chain, swapping tires, or changing a flat on the trail, you're able to lock your derailleur in place for easy adjustments. Just push the cage forward to create some slack, and lock it into place while you work on your bike. No extra tools are required to make this happen, which makes trail emergencies where you need to remove your wheel a simple fix.
SRAM's X01 Rear Derailleur is available in the colors Black and Red and is only compatible with SRAM 11-speed XX1 or X01 components.
View more Mountain Rear Derailleurs
Community & Reviews
- Familiarity: I've put it through the wringer
I'm a hold out for sure. I still ride a 26er, and until this week was on a 3x9. If it aint broke don't fix it has been my motto. Given a really good deal on the X01 group, I modified my XTR cranks with a narrow wide chainring and went for it. I dropped over a pound, cleaned up the cockpit, and simplified my shifting. There has been zero chainslap since, zero missed shifts, zero "oh s@#$ I can't get the gear I want moments". I'm loving it. That said, I cut out my two top end gears and three bottom end gears by making the change. I've spun out a couple of times, but really, who needs to go faster than 34mph on a mountain bike. I've also done a couple longer climbs of 3000' where a gear or two lower would have been OK. That said - I'm sold. I've been a life long shimano lover, but sram's got a winner with these groups.
1X Cassette Master
If you are looking to get into the 1x11 game that SRAM is putting out, look here. The XO1 rear derailleur handles the 11 cogs just fine and looks good doing so with ease. Best set it and forget it 1X on the market. It might not be as light as the XX1, but it is minimal difference for the more budget friendly option of the XO1.