SRAM X0 Rear Derailleur $254.95
SRAM started from scratch with a purpose built X0 10-Speed Rear Derailleur after their success with the XX 10-speed drivetrain. And now, with XX seated at the top of the range, X0 has become more of the people's champion, and if you buy your own parts, it will give you performance nearly indistinguishable from XX for considerably less cash outlay.
There are differences of course. For one, it's a bit heavier; only the outer cage plate on this X0 is carbon fiber, with the inner being forged aluminum, and it lacks the Ti hardware of the XX unit. The inner and outer parallelogram linkages are forged from aluminum as well, with wide pivots to ensure linkage stability when the derailleur is under tension in the biggest cogs. This way, you'll get accurate shifting and quiet performance when pedaling.
It's built specifically to accommodate the narrower 10-speed chain and 36t cog. The X0 10-Speed Rear Derailleur also uses their Exact Actuation Technology along with the matching X0 10-speed shifters. While their 9-speed groups have long relied on a 1:1 pull ratio, designed to be more tolerant of the muck and grit associated with mountain biking, the Exact Actuation in the 10-speed X0 group takes the performance to another level by ensuring a perfect and consistent shift distance between each gear, all the way across the cassette. And like the rest of SRAM rear derailleurs, the X0 model is designed for direct cable routing, eliminating the typical loop of excess housing necessary with other derailleurs.
The SRAM X0 10-Speed Rear Derailleur is available with Black, Blue, Red, or Gold accents and is designed to work with SRAM's 10-speed 11-32 and 11-36 cassettes. It can be paired with one, two, or three chainrings. To that end, there are three cage length options -- Short, Medium, and Long. The mid length cage is suited for use with hardtails and single-pivot suspension designs with minimal chain growth throughout the range of travel. The long cage model can handle the greater chain growth potential that many full suspension trail bikes exhibit. If in doubt, go with the long cage version. Sealed bearings in the jockey wheels will keep them running smoothly even when the rest of your drivetrain is accumulating serious muck.
- Exact Actuation 1:1 ratio means cable movement is equal to derailleur movement, thus providing reliability, easy setup, and effortless actuation
- Direct Route Technology provides the shortest cable routing possible for reduced friction and weight
- Carbon cage keeps weight down without sacrificing shifting performance
- Smooth, freely spinning pulleys keep parasitic drag to a minimum
- Multiple color choices allow personalization
What community has to say
will the xo10 speed long cage work with...
will the xo10 speed long cage work with my 2012 x9 shifters?
Can I replace my x5 with an xo ? Their...
Can I replace my x5 with an xo ? Their both 10 speed and it's for my 2013 Jamis Durango Race.
Yes, the X0 rear derailleur will work on your Jamis. SRAM's X5 and X0 rear derailleurs both utilize SRAM's Exact Actuation 1:1 pull ratio, so as long as you are using a SRAM Exact Actuation shifter (which you almost definitely are), then you will be fine with the X0 - and your shifting will improve quite a bit, too.
Thanks For your help Caffery. Just ordered my sram xo.
Nice, Joey. Enjoy, and let us know if you need anything else. - C
Like a swiss clock
I have used the X.0 drivetrain for years and the nice thing about it is that it is like a swiss clock, always precise, well built, and beautifully crafted. Abuse after abuse, beating after beating the X.O group gets the job done. I have bent many, many hangers but have yet to snap the arm on an X.O derailleur.