• Free Shipping on orders over $50*
  • 100% Guaranteed Returns
$486.00 - $586.00

Item # SRM0533

Select options
  • Select options
  • One Color, 27.5in, Front ($486.00)
  • One Color, 27.5in, Rear ($586.00)
  • One Color, 27.5in, Rear XX1 ($586.00)
  • 100% Guaranteed Returns

Item # SRM0533


Ride light over the mountain.

You're not alone if you feel like 27.5-inch wheels have swept through the mountain bike industry almost overnight. And, as a result, we've found that many brands are now completely reevaluating their approach to building trail bikes. In this spirit of throwing out old assumptions, SRAM started with a clean slate when it set to designing the ROAM 50 27.5in Aluminum UST Wheel. Essentially it created that a wheel that's worthy of every part of the mountain, only at weight that's capable of dominating an XC race.

In designing its new range of wheelsets, SRAM's engineers started with a blank slate. Accordingly, they focused on building wheels that provide durability, a responsive ride quality, and a light overall weight. The Taper Core construction of the aluminum ROAM rim is an illustration of this mission. Taper Core is the product of an extrusion process that allows SRAM to place more material where it's needed for durability. This results in a thinning of the remaining rim profile in order to optimize the balance of weight and strength. In fact, a cross-section of the rim reveals that its main cavity is thinner on the sides than either the bead hook or the spoke bed. In other words, the sidewall thins gradually, providing a strong base for the bead hook. This way, the rim is more resistant to denting under hard impacts.

The cross-section of the ROAM 50's rim also reveals an asymmetrical shape that offsets the spoke bed. However, this isn't a mere novelty. Instead, it's actually key to building the ROAM wheels with zero dish, while simultaneously maintaining even spoke tension. Basically, with a traditional symmetrical rim, the spokes on the drive side must be shorter in order to keep the rim centered relative to the dropouts. Unfortunately, though, the discrepancy in spoke length puts greater tension on the drive side spokes than the non-drive side spokes. As a result, this imbalance reduces the overall strength of the wheel. However, in the case of an offset rim design, like the ROAM, the spoke bed aligns with the hub shell. This keeps both the spoke tension and spoke length equal on both sides, while the shape of the rim centers the tire relative to the dropouts. This way, the ROAM wheels maintain correct spacing and reap the benefits of even spoke tension. And remarkably, this is achieved with identical spoke lengths on both sides of the hub, at both the front and rear. This not only adds strength, but it also means that one replacement spoke is able to be used on the on any side of either the front or rear wheel.

Building a balanced wheel is important, but it doesn't mean much if your tire doesn't have a stable platform to rest on. SRAM's Wide Angle rim shape addresses this concern with a 21mm internal width that matches up with today's wider tires. So, your tires will remain planted through turns, not rolling off of the rim.

At the center of the ROAM 50 wheels, you'll find user-friendly hubs. A straight-pull spoke design is employed, as opposed to a traditional J-bend spoke. As a result, stiffness was improved, while also adding the benefit of making on-the-fly spoke replacements a bit easier. The axles use push-on end caps at front and rear, meaning that fitting these wheels to nearly any mountain bike axle standard will be a breeze. The freehub is available in both a standard 9/10-speed configuration, as well as SRAM's XD freehub body. And regardless of the version, both freehub designs run on DT Swiss's Star Ratchet system. Not only has the Star Ratchet system earned a reputation for light weight and durability, but its design enables home mechanics to overhaul the rear hub without any proprietary tools.

The SRAM ROAM 50 27.5in Aluminum UST Wheel is sold individually and in a 27.5-inch wheel compatibility. Please note that the rear wheel is available with either a Shimano/SRAM 9/10-speed freehub body or a SRAM XX1-compatible free hub body.

Tech Specs

[rim] aluminum
Rim Width:
[external] 25 mm, [internal] 21 mm
Front Hub:
SRAM Double Decker
Rear Hub:
SRAM Double Decker, Star Ratchet 36T
double-butted stainless steel
Spoke Nipple Material:
aluminum with nylon lock ring
Axle Type:
[front] quick-release, 15 mm thru-axle, 20 mm thru-axle, [rear] 10x135 mm quick-release, 12x142 mm thru-axle
Brake Compatibility:
Rotor Compatibility:
Complete Set Weight:
1530 g
Recommended Use:
Manufacturer Warranty:
2 years

Reviews & Community

What do you think of the

SRAM Roam 50 27.5in Alumimum UST Wheel

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Only jpg, jpeg, png, gif or bmp files please.

Submit Cancel

Here's what others have to say...

Unanswered Question

Could I please confirm this SRAM Roam 50...

Could I please confirm this SRAM Roam 50 rear wheel comes with the 36T start ratchet?

I've read elsewhere that it might only come with an 18T ratchet and just want to clear my confusion :) Thank you.