Out of Stock
Item # SRM0254
Don't worry though, we have a lot more Road Front Derailleurs in stock than that.View Similar Products
SRAM Rival Front Derailleur $0.00
The Rival front derailleur is built with the same outer plate design as Red and Force, allowing you to use all 10 cogs on your cassette while you're in the big chainring with minimal chain rub. You can cross-chain all day long in your big ring without having trim the front derailleur. And when you're in the small ring you need only one trim position in order to make silent use of all 10 cogs. It's identical in virtually every way to Red and Force, except that you get a high-polished aluminum finish with black highlights, and it lacks titanium hardware.
Like Red and Force, the Rival front derailleur can handle any chainring differential up to 16 teeth. This means you'll use the same derailleur for a 53/39 crankset as you will a 50/36 or 50/34. The braze-on version weighs in at 88g, while the clamp-on versions run closer to 103g. Available in braze-on, 31.8mm clamp, and 34.9mm clamp.
The actual weight of the SRAM Rival Front Derailleur: Braze-on is 89g. 31.8 is 101g. 34.9 is 101g.
- SRAM actuation ratio for proper balance between upshift and downshift
- Intuitive adjustments make it easy to get your shifting dialed
- WiFli ZeroLoss trim for instant, precise shifting
- Compatible with standard and compact rings
- For use with SRAM 10-speed drivetrains
View more Road Front Derailleurs
Reviews & Community
Does the Job
Install, test, shift, ride. It's doing thejob just fine on my TT bike on a budget. It's nothing flashy, but it does the job well. Really fidgety for adjustment from small to big, but if you give it some TLC it'll shift just fine.
- Familiarity:I've put it through the wringer
Have rival throughout on my ridley x-fire 2012, with 12-25 cogs and 36/46 chain rings (all came stock). bought at a LBS, and from day one there was always trouble upshifting from the 36 to the 46 when on any load. would shift perfectly in the stand, but not when you are pedaling; would literally almost have to stop pedaling to get it to shift. The LBS tried everything; lifted it, dropped it, twisted it, no dice. Took it to a second bike shop, same deal. Finally read that others have the same problem; concurrently, my LBS said they were now just swapping them out for shimano ultegra FDs, which are compatible, as all the rival FDs were having the same problem. So had mine switched, and have been happy ever since; shifts immediately even under moderate load.
Again this was the 2012 rival FD, but I don't think it has actually changed in that time. When it does get updated, hopefully it is MUCH better, as it was pretty much un-rideable. The rival RD, on the other hand, works just beautifully.
A little lacking!
- Familiarity:I've used it several times
Let me start by saying I like my SRAM Rival shifters; and RD but this FD is hard to get dialed in. I have a 11-32 rear cassette and 50-34 front crank with still some cross chaining rub going on no matter how I adjust it. I did not have these issues with my 105 system on my other Orbea bike. It shifts okay but the trim effect is also lacking in comparison to my 105 system. I can live with it but I may upgrade that FD to a Force to see if this can be corrected. Overall it works and does fine but I really think it should be able to be dialed in so no rub effect. So because of that I give this a 3 star rating. Don't get me wrong the quality is great just the dialing in to be quite a pain which I have read feedback these can be!
Does a decent job
This FD does a decent job of downshifting however I noticed some weakness on the upshift. I sometimes had trouble with it not moving the chain correctly in that it would skip along the big ring a few times before catching. I swapped my Shimano 105 FD back onto my bike, kept the SRAM shifters and all is well again. The upshifts are back to being lightning fast and very smooth.
The SRAM Rival FD works fine however the Shimano 105 was noticeably better