Just as you can get XTR Cranksets in two versions, Race 2x10 and Trail 3x10, the brakes are available to match. And with the wholesale design change from the previous 970 brakes, the performance is more akin to the Shimano brakes we relied on for years, and they weren't recent models either. These XTR Trail Brakes M988 are visually similar to the 985 XTR Race Brakes, though a close inspection will reveal that there are indeed a few differences that make the 988 Trail Brakes more suitable for extreme use.
The lever blade itself is one mm wider, at 14mm, to give you a bit more surface area, and it's dimpled for extra gription. Your fingers will appreciate the beefier blades after lengthy, white-knuckle descents. This version also allows you to adjust the free stroke of the lever blade where the XTR Race levers do not. This function lets you determine how far you like the blade to travel before your pads make contact with the rotor, and couple that with a reach adjustment and you can dial them to perfection.
In comparison with the previous 970 XTR's radial master cylinder design, this 988 XTR master cylinder is far different. For starters, the integrated barrel reservoir sits along and atop the master cylinder which is positioned at a tangent to the bar rather than straight out from it. Sizewise, these levers are much lower profile, but more importantly, the movement of the lever pivot towards the bar creates a more ergonomic design. In essence, the arc of the lever optimizes your natural finger movement and position of strength with the point in the lever travel where your power is transferred through the system to the caliper. These also feature Shimano's Servo Wave technology where the Race Levers do not. Servo Wave allows the pads to sit further from the rotors at rest (a great feature for trail/all mountain bikes that might see more rotor abuse than a race machine). This is possible as the piston travel changes relative to lever travel as you squeeze on the brakes to close the gap to the rotor quickly, then slowing to allow predictable modulation.
The calipers are the same for both the XTR Race and Trail Brakes. They both use a 22mm piston for inspiring stopping power, and Shimano has brought back a banjo fitting for the hose attachment. We're glad because it allows more flexibility with hose routing to keep it safe and looking nice. It should also be noted that these M980 Calipers are lighter than 970calipers, and the polished finish looks great to boot. These 988 XTR Trail Brakes provide 25% more power than 970 levers with no weight increase. They employ Shimano's Radiator Pads. These are specific to the Trail brakes and have integrated fins that rise up out of the caliper to dissipate heat from the pads and caliper body, reducing the temperature by 50° C.
The Shimano XTR Trail Brakes 988 are available separately as right or left levers and calipers and have hinged, split clamps for easy mounting. They come as pre-bled lever/caliper/hose assemblies and are complete for each end of the bike except for rotors (sold separately). Shimano XTR Brakes will work equally well with XTR Ice Tech Rotors or the more standard XT 6-bolt rotors. Please Note: If you plan to run 180mm or bigger rotors, you may need to also purchase the proper Shimano caliper adapters. Check your frame and fork compatibility to determine your needs.
Servo-Wave technology with a claimed 125 percent increase in stopping over previous XTR generations for reduced arm-pump and one-finger-friendly braking
Wide 14mm brake lever for a positive, secure, fatigue-reducing grip
Hinged-clamp mounting bracket and compatibility with i-spec bracket for ease of setup and a clutter-free cockpit
Ceramic caliper pistons and radiator-fin-backed pads for optimum heat dissipation and consistent, powerful stops
Ultra-stiff, mono-block, two-piston caliper for efficient, flex-free transfer of energy
reach (tool free), free stroke
Terms And Conditions
This Usage Agreement (the "Agreement") governs your conduct while using various services on the web site Competitive Cyclist and its affiliate web sites (collectively, the "Site"). All references to "we," "us," and "our" shall mean Competitive Cyclist and all references to "you" and "your" shall mean the user of the Site and Site Services. This Agreement applies to various services and activities on the Site as well as to gear review and product ratings (collectively, "Site Services"). Please read this Agreement carefully.
BY ACCESSING, BROWSING, AND USING THE SITE, ANY SITE SERVICES AND OTHER SERVICES THEREIN, YOU AGREE TO BE BOUND BY THIS AGREEMENT AND ITS TERMS. IF YOU DO NOT AGREE TO THIS AGREEMENT OR ANY SUBSEQUENT MODIFICATION THEREOF, DO NOT ACCESS, BROWSE OR OTHERWISE USE THE SITE OR SITE SERVICES, INCLUDING THE SUBMISSION OF ANY REVIEWS OR COMMENTS.
Any comments, reviews (including gear reviews and product ratings), posts, feedback, questions, answers, notes, messages, images, video, audio, materials, documents, data, graphics, ideas, suggestions or other communications (collectively, "User Content") you submit on the Site are not private or proprietary. By submitting User Content on or through the Site, you grant, assign and transfer to Competitive Cyclist all of your rights, title and interest, including without limitation, all intellectual property rights and moral rights, in and to such User Content. To the extent the preceding assignment and transfer is ineffective, you hereby grant Competitive Cyclist an irrevocable, royalty-free, worldwide, perpetual right and license to use, copy, modify, adapt, display, publish, archive, store, distribute, reproduce and create derivative works based upon such User Content, in any form, media, software or technology of any kind now existing or developed in the future.
By submitting such User Content on or through the Site, you are confirming that (a) you are the sole author of the User Content and the User Content originated with you and not copied in whole or in part from any other work; (b) you have obtained all necessary permissions associated with the User Content, including without limitation permissions relating to copyrights, trademarks, rights of publicity and/or rights of privacy; (c) the User Content does not contain hate speech or profanity and is not unlawful, threatening, abusive, harassing, tortuous, defamatory, vulgar, libelous, obscene, racially, ethnically or otherwise objectionable, an invasion of another's privacy, or otherwise in violation of this Agreement; (d) that you are not a minor and have the legal right and capacity to enter into and comply with this Agreement; (e) such User Content does not and will not, in any way, violate or breach any of the terms of this Agreement; and (f) Competitive Cyclist shall not in any circumstances be required to pay or incur any sums to any person or entity as a result of its use or exploitation of the User Content.
With respect to your conduct on the Site or while using the Site Services, you agree not to: (a) attempt to disguise the origin of any User Content transmitted to the Site Services whether through the Site or any third party site; (b) act in any manner that negatively affects other users' ability to use the Site and Site Services; (c) impersonate any person or entity, including without limitation, a manufacturer or owner of any product, or falsely state or otherwise misrepresent your affiliation with a person or entity; (d) interfere with the Site or Site Services, or servers or networks connected to the Site or Site Services, or disobey any requirements, procedures, policies, or regulations of networks connected to the Site or Site Services; (e) upload, post, or otherwise transmit any User Content that with respect to the Site Services: (i) is not relevant to the product, service, person or entity being reviewed; (ii) you do not have a right to transmit under any law or under contractual or fiduciary relationships (by way of example but not limitation, inside information, proprietary and confidential information learned or disclosed as part of employment relationships or under nondisclosure agreements); (iii) contains software viruses or any other computer code, files or programs designed to interrupt, destroy or limit the functionality of any computer software or hardware or telecommunications equipment; or (iv) is unsolicited or unauthorized advertising, promotional materials, "junk mail," "spam," "chain letters," "pyramid schemes," or any other form of solicitation.
User Content does not reflect the views of Competitive Cyclist, and Competitive Cyclist does not represent or guarantee the truthfulness, accuracy, completeness, timeliness, integrity, quality or reliability of any User Content, nor does Competitive Cyclist endorse or support any opinions expressed in any User Content. In no event shall Competitive Cyclist have or be construed to have any responsibility or liability for or in connection with any User Content, Any gear reviews and/or product ratings submitted on the Site, if displayed, are displayed for entertainment and informational purposes only. Under no circumstances will Competitive Cyclist be liable in any way for any User Content, including but not limited to, any errors or omissions in any User Content, or for any loss or damage of any kind incurred as a result of the use of any User Content posted, emailed or otherwise transmitted via the Site or Site Services.
If Competitive Cyclist determines, in our sole and absolute discretion, that you or any User Content you submit violates this Agreement, we reserve the right, at any time, without notice and without limiting any and all other rights Competitive Cyclist may have under this Agreement, to: (a) refuse to allow you to submit further User Content; (b) remove and delete your User Content; (c) revoke your registration and right to use the User Content Submission Features; and (d) use any technological, legal, operational or other means available to enforce the terms of this Agreement, including, without limitation, blocking specific IP addresses or deactivating your registration, access to the Site and Site Services using your e-mail address, and your user name and password. Without limiting the foregoing, once User Content is submitted to the Site, Competitive Cyclist may take any or no action with respect to such User Content, including without limitation, deleting, editing, modifying, rejecting, or refusing to post such User Content, but is under no obligation to offer you the opportunity to edit, delete or otherwise modify User Content once it has been submitted. Competitive Cyclist shall have no duty to attribute authorship of User Content to you and shall not be obligated to enforce any form of attribution by third parties.
If, despite the foregoing assignment and transfer of rights in the User Content, it is determined that you retain moral rights (including the rights of attribution or integrity) in the User Content, you hereby declare that: (a) you do not require that any personally identifying information be used in connection with the User Content or any derivative works of or upgrades or updates thereto; (b) you have no objection to the publication, use, modification, deletion and exploitation of the User Content by Competitive Cyclist or its licensees, successors or assigns; (c) you forever waive and agree not to claim or assert any entitlement to any and all moral rights of an author in any of the User Content; and (d) you forever release Competitive Cyclist, and its licensees, successors and assigns from any claims that you could otherwise assert against Competitive Cyclist by virtue of any such moral rights.
You are prohibited from violating the security of any system or network compromising the Site or the Site Services, including but not limited to the following: (a) unauthorized access to or use of data, systems, or networks, including any attempt to probe, scan or test the vulnerability of the Site or Site Services or to breach security or authentication measures; (b) unauthorized monitoring of data or traffic on the Site or of the Site Services; (c) interference with the Site or Site Services including without limitation, any type of flooding technique or deliberate attempt to overload the system such as denial or service attacks; (d) forging of a message header or any part of a message header; or (e) using manual or electronic means to avoid any use or access limitation placed on this Site or the Site Services. Such violations may result in criminal or civil liability.
Competitive Cyclist reserves the right to report any activity or persons that Competitive Cyclist suspects has violated any law or regulation to appropriate law enforcement officials, regulators, or other appropriate third parties (including the disclosure of appropriate subscriber information). Competitive Cyclist may also cooperate with appropriate law enforcement agencies to assist in the investigation and prosecution of any illegal conduct. Indirect or attempted violations of this Agreement and actual or attempted violations thereof by a third party on behalf of any user shall be considered violations of this Agreement by such user.
i guess this is pretty atypical as most of the guys at my LBS hadn't seen it and my bike wrench brother hadn't come accross it either. but, for what it's worth, i severed my rear line. i had read that the lines that come with xtr brakes were special blah blah blah, but i guess we haven't made them totally rock proof yet.
so the sw doesn't move the pads away from the rotor, but changes the contact point during your lever pull. as far as disk rub goes though, i have had to make the occasional adjustment to my caliper alignment, but i have no rubbing issues.
Hey Carlos, thanks for your question! These brakes are not sold in pairs. The rear and front brakes are sold separately. Feel free to use the 'Live Chat' feature on the top of our website to speak with a bike technician if you have any more questions.
Had the 2012 SRAM XX brakes. They were horrible - initially were ok, but lost stopping power quickly through the season. I switched to the XTR brakes and they are amazing. Great one finger stopping... don't seem to fade on long descents. Such a contrast to the XX brakes.
I know these brakes are pricey, but they are amazing. the modulation is incredible. i haven't noticed any fading and i had to ride them HARD on a trail that ended up not being so fun. toolless reach adjust is great, and free stroke adjust lets you dial in brake contact to your specs. The power combined with the mini lever make one finger braking easier than two fingers on my old shimano hydros.
Until recently I would have said SRAM Avid trails are the best brakes on the market, but Shimano has really stepped it up in the lastest generation XT and XTR brakes, which have insane stopping power and the icetech rotors are impossibly good at shedding heat. So light weight and so precise when it comes to braking.
After a painful warranty period, I now like these brakes. :-) While they were not working and I was trying to get them warrantied, I really didn't like them. The brakes came preinstalled, but since you have to disconnect the lever to install, I suspect that some air was introduced. So I had to bleed them early in the process. managed to drop ( and lose) the bleed screw, and that was a proprietary screw that I had to source from a bike store in Korea as it's not available from US distributors at all. Then contaminated the pads, but managed to get them working again and then the rear piston was leaking fluid, so can imagine all sorts of fun that caused.The replacement came with a hose that was about nine feet too long, so had to cut and install the barbed fitting and new compression olive. That barbed fitting doesn't like to go in the hose. Had to purchase a bleed kit, because you can't do much with a special bleed kit. Here's what I like. Shimano has the best lever feel. Truly one finger braking, even in crazy downhill sections. Good stopping power. Goofy finned pads seem to work. What I don't like; Shimano mineral oil (really? it's how expensive?) Barb and compression fitting set up. The fact that the first pair leaked oil.
I wouldn't have bought these if they didn't come on the bike. Not convinced that I'd buy them again. I've had a better bleeding/maintenance with other brands (Magura and Hope). But now that I've got them working, I'll keep them for a while.
Best functionality in a high end MTB brake that I have ever ridden, but with some reliability shortcomings.
I have ridden all kinds of Avid, Magura, Hope and Shimano brakes, and these are far and away the best Ive ridden. The lever size (small - 1 finger braking) is perfect and the modulation is top notch. Paired with the ice-tech rotors and I have done some serious descents with them (off the passes here in PC and Jackson) and not had any over heating, fading or squeeling. EAT THAT AVIDS.
One problem popped up however with the hose at the crimp for the banjo bolt into the caliper. On my first set, both the front and rears began to leak fluid, which in turn flowed down onto the pads. Riding the ribbon in Grand junction with no front brake was not awesome. Alas, they have a lifetime warranty and within a week, they fixed me up and i havent had issues since. It sounded like a common problem for the early releases that has now been addressed.
If your asking about rim brakes specifically, then no. To my knowledge there are no hydro rim brakes. Nothing else compares to hydro discs. Not only because of modulation but also stopping power and performance in adverse conditions such as mud or water.