Shimano XT FD-M785 Front Derailleur - Double $49.95
The Shimano XT Double Front Derailleur FD-M785 has been designed to optimize its function with two chainrings. To this end, the cage length and shaping is specific to the smaller diameter differential between the big and little rings on a 2x10 DynaSys drivetrain. Whether you run a 26/38t or a 28/42t crank, this is the changer you'll want.
Otherwise, the FD-M785 designation means that this is a low-clamp/ top-swing derailleur. For what it's worth, Shimano's top-swing derailleurs always tickle the scale a few grams lighter than their traditional counterparts, and this one's no exception. The limit screws are angled to the outside to make adjustments easier on many of today's complex rear suspension designs. Compared to its XTR counterpart, this XT derailleur is the functional equivalent. The cage shaping is the same, the only difference being a few grams.
The Shimano XT Double Front Derailleur FD-M785 is available with two mounting options -- E-Type or Multi-Clamp (28.6, 31.8, and 34.9mm). It uses Shimano's Dual Pull lever arm, so it works for top tube and down tube cable routing.
Reviews & Community
2X10 shifting great.
- Familiarity: I've put it through the wringer
I switched from 3X10 to 2X10 and before I got this double shifting was not spot on. Now it works great up and down with fast reliable shifts under all conditions. This one is much smaller than the same model for 3X10 and feels lighter.
Does its job...
WELL. Nice work again shimano!