Shimano E-Tube Di2 Wire $29.95
Look fast to go fast.
To outfit your Ultegra 6770, Ultegra 6870, or Dura-Ace 9070 Di2 bike, you will need five wire sections: front wire harness, down tube, front derailleur, rear derailleur, and battery. The front wire harness is sold separately, and is the only section that comes in just one length. Each of the remaining sections is available in three lengths--small, medium, and large. Refer to the size chart for available lengths, categorized by section.
One nice thing about the E-Tube system is that all the wires are the same, save for the length. This means that all the connections are identical, and it doesn't matter if your frame has internal or external routing.
Confused about how to build your Di2 Kit? Read our Learn Article.
Di2 Reference Guide
Note: This reference is meant to be used as a guide for creating a Shimano Di2 drivetrain package. For further assistance please feel free to give us a call.
Battery and Wires:
Our Shimano Di2 packages are built for three standard configurations based on battery location and wire routing. First, you'll need to determine if your frame uses an internal or external battery mount, and whether the routing is either internal or external. Below is a guide for which battery, charger, mount, and junction boxes are required for your configuration.
|Battery||Battery Charger||Battery Mount||Junction A||Junction B|
w/ External Routing
|SM-BTR1||SM-BCR1||SM-BMR2||SM-EW90 A/B 3/5 port||SM-JC40|
w/ Internal Routing
|SM-BTR1||SM-BCR1||SM-BMR2||SM-EW90 A/B 3/5 port||SM-JC41|
w/ Internal Routing
|SM-BTR2||SM-BCR2||SM-EW90 A/B 3/5 port||SM-JC41|
The SM-BMR2 battery mount is available in three configurations -- Long External, Short External, and Long Internal. Both Long versions are to be mounted using the bottle cage mounts, while the Short version is designed for Di2-specific frames with either a chainstay or down tube mounting location.
There are two junctions needed for completing your Di2 build -- A and B. Junction A, SM-EW90, is located at the handlebars and available in both three- and five-port options. The three-port option is intended for standard shifting with a left and right hand shifter. If you have the intention of using Shimano's satellite sprint shifters, or a combination of time trial shifters and shifter/brake levers, the five-port junction box will be the necessary selection.
Depending on your frame specification, Junction B (SM-JC40 or SM-JC41) is located either internally or externally at the bottom bracket area. Accordingly, SM-JC41 is designed for frames with internal wire routing, while SM-JC40 is intended for external wiring options.
For your convenience, we've created wire packages for your Di2 build kit in the sizes Small, Medium, and Large. Below, you'll find which wire lengths are included in each kit. Additionally, we've recommended a kit size based on your frame size.
|Down Tube Wire||700mm||750mm||950mm|
|Front Derailleur Wire||300mm||350mm||400mm|
|Rear Derailleur Wire||500mm||550mm||600mm|
E-Tube Wire length suggestions are an approximation.
What community has to say
etube di2 wire
- Familiarity: I've used it several times
i am amazed how robust this wire is and how well it fits neatly inside the frame. i was kind of hesitant about electrical wire on a road bike. but shimano did a great job of building very robust protective shield around the major wires for protection. it is not easy to cut one of these wire's unless you deliberately set out to do just that. Good product and it looks like it will last a long time.