Seasonal Apparel Sale—Save up to 60% »
Sale $209.99 $319.95 34% off

Item # SHI0656

Select options
  • Select options
  • Gray, 170x53/39 ($209.99)
  • Gray, 172.5x53/39 ($209.99)
  • Gray, 175x53/39 ($209.99)
  • Gray, 170x50/34 ($209.99)
  • Gray, 172.5x50/34 ($209.99)
  • Gray, 175x50/34 ($209.99)
  • Gray, 170x52/36 ($209.99)
  • Gray, 172.5x52/36 ($209.99)
  • Gray, 175x52/36 ($209.99)
  • Gray, 170x46/36 ($209.99)
  • Gray, 172.5x46/36 ($209.99)
  • Gray, 175x46/36 ($209.99)
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # SHI0656

Modeled after Dura-Ace.

With the introduction of Shimano's new Ultegra 6800 groupset, most people's focus was naturally drawn toward the additional gearing options provided by the 11th cog. But the new group is something more than just added gearing; it represents an entirely revamped drivetrain system that now integrates its top-end Dura-Ace 9000 engineering into every one of its components. The new four-arm crankset displays this most clearly, as it pulls the same striking visuals and functionality that have made 9000's cranks so popular in the pro-tour ranks.

It's quite possible that Ultegra 6800's most stunning and recognizable feature is indeed the FC-6800 crankset, as it borrows the best technology from its Dura-Ace brother. On the surface, the FC-6800 is a complete departure from the traditional aesthetics of prior Ultegra. Gone are the days of the five-arm spider, and the necessity for a separate compact crankset has also fallen by the wayside. Instead, 6800 features a shift to a new four-arm spider design. This occured for several reasons, but most notably it's because the four-arm spider matches rigidity of Dura-Ace cranks while shedding close to 26g of weight over 6700. Also similar to Dura-Ace 9000, the 6800 cranks were built with Shimano's Hollowtech II construction. Over the past few iterations of Dura-Ace, this manufacturing methodology has played an integral role in attaining weight reduction without sacrificing Dura-Ace's superior stiffness. This, again, is a welcome improvement over the previous version of Ultegra.

Shimano has learned what works, and over the years has continually added to, and improved, the ideology of Dura-Ace, which now carries over extensively to Ultegra 6800. Hollowtech II and Hollowglide are prime examples of this. Strategic placement of hollow aluminum throughout the crankset and chainrings allows more structural material to be used, and when coupled with Shimano's integrated bottom bracket, creates an unrivaled weight-to-stiffness ratio.

The four-arm spider amplifies this characteristic, but more important to Shimano, it embodies its 'rider-tuned' philosophy. In this, Shimano created 6800 to work for you, the rider. Case in point, the four-arm design and the 'top-secret' BCD allows for front chainring combinations from 46-36T to 55-42T on the same spider. 

The Shimano Ultegra FC-6800 11-Speed Crankset is available in sizes 170, 172.5, and 175mm and in 50-34, 52-36, and 53-39 chainring options. Shimano has also added a cyclocross-specific 46-36 combination in all three crank arm lengths.

  • 11-Speed Crankset
  • Hollowtech II Design
  • 4-arm spider accommodates chainring sizes from 46-36T to 55-42T
  • Compatible with Shimano 6800, 11-speed shifters and chainrings

Tech Specs

Arm Length:
170 mm, 172.5 mm, 175 mm
Chainring Sizes:
46/36, 50/34, 52/36, 53/39
Actual Weight:
Gray, 170x53/39: 765gGray, 172.5x53/39: 765gGray, 175x53/39: 765gGray, 170x50/34: 765gGray, 172.5x50/34: 765gGray, 175x50/34: 765gGray, 170x52/36: 765gGray, 172.5x52/36: 765gGray, 175x52/36: 765gGray, 170x46/36: 765gGray, 172.5x46/36: 765gGray, 175x46/36: 765g

Community & Reviews

What do you think of the

Shimano Ultegra 6800 Crankset

? Share a...

Leave a review:

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Only jpg, jpeg, png, gif or bmp files please.

Submit review Cancel

Here's what others have to say...

Will this work on my BB30? I've read something about some kind of adapter....

Responded on

You would have to have an adapter. Item # WHL0004

4 5

Ultra Hollow Crankset

  • Familiarity: I've used it several times

Last winter, I totaled my 7 year old S-Works Roubaix, and miraculously, it was covered by my homeowners' insurance. I had my local shop build a new bike on a current S-Works SL4 frame, using Dura-Ace Di2, but I used the Ultegra crankset because I just though it looked cooler. I've had no problems with it.
Last week, my stepson salvaged what we could from the wrecked S-Works Roubaix and built a bike for my son using my son's old steel LeMond Buenos Aires frame. Once again, we used an Ultegra compact crankset (the carbon cranks from the wrecked S-Works wouldn't work), and we were surprised to see that the tool that tightens the crankset to the English threaded bottom bracket (cheap piece of plastic) wasn't included in the retail packaging for the crankset. I can understand why shops would have this tool at their disposal, but I cannot imagine any reason not to include it in the retail packaging.

Other than that one little gripe, I'm very pleased.

Unanswered Question

Can you put the Dura Ace 54t chain ring on this crankset? Or ... Does Shimano make a 54t ring for the Ultegra crank ??

Unanswered Question

I'd like to upgrade my mixed Shimano 9 spd drivetrain (ultegra 9spd brifters, 105 9spd front/rear derailleur, 105 5750 10spd compact crankset, ultegra 6500 9spd 12-27 cassette, and LX HG73 9spd chain) to full Ultegra 6800 drivetrain. Due to cost, I'd like to do this in stages, understanding shifters/derailleurs/cassette/chain will need to be done together, at minimum. Question is, can I upgrade crankset to Ultegra 6800 11 spd 52x36 and run as is until I can get remainder of components?

Avg. ride time: 6h 11m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.

Hello, I have a road bike with a 10-speed Shimano 105 group and want to upgrade some parts to the new 11-speed Shimano. Are the groups compatible, will this 11-speed crankset work with 10-speed components? Thanks

Responded on

The groups sets are not compatible but the crankset is. I ran the 11 speed crank last year with a 10 speed groupset.

Unanswered Question

Any issues putting this on a QR Kilo currently running FSA Omega crankset / MEGA EXO BB? Also running 10-spd SRAM Rival. Any issues with 10 speed? Thanks!

Just want to be sure the Ultegra 52/36 will be compatible with my Trek Madone which has a BB90.

My road bike is Ultegra Di 10 spd equipped but the crank is a rebranded SRAM APEX crank. I would like to swap it out with an ultegra 6800 compact 50/34. Will this work? Do I need a new BB as well?

Responded on

While we have not tested it here, there are reports that you will be fine running 6800 11 speed cranks with the 10 speed group. You will indeed to get a new shimano based bottom bracket. Call me at extension 4769 if you have any questions.

Responded on

Have found out that ultegra 6750 is still available. That is the 10 sp compact crank. 11 speed cranks are designed for a narrower chain.
A larger chain will work in the 11 sp crank but it may be noisy.

Responded on

I ran the 6800 with a 10 speed group set all last year with the 6700/7900 chains no issue once so ever the 6800 is stiffer and lighter by far then the 6700 series no reason not to go with the 6800

I have and FSA 11 speed crankset ( stock on my 2014 Felt B14) with a BB30 bottom bracket will I be able to install an ultegra 11 speed crankset.

Responded on

only with conversion kit shimano 24mm to bb30 or new bottom bracket

I currently use 105 and wants to upgrade to Ultegra 6800. My Tarmac uses BB30, will I have any issues?

Best Answer Responded on

If you currently have a 105 crank on there, you already have some type of adapter to go from BB30 to Shimano's 24mm spindle. All Shimano spindles are the same diameter, so you'll be fine. Just take the old one off, put this one on, and you'll be good. Remember you'll need the special tool that fits into the black plastic cap that is on the non drive side to loosen and tighten the crank.

Unanswered Question

Would this work with my bike (without upgrading other components) if I currently have a triple ring 52/42/30T with a 9 speed cassette. I have a front derailleur shimano sora FD-3403 9 speed, and a rear derailleur tiagra for 9 speed.

I suppose I'm worried about it being compatible with my front derailleur and shifter... Common sense would say that I would need to change them, but I just wanted to check.

I have a 10 speed cassette and Ultegra FC-6750 50/34 compact crank, can I upgrade to the FC-6800 52/36 11 speed crank without having to make any other upgrades.

Responded on

Yes you can use your existing ten speed chain and cassette with the new 11 speed crankset and chainrings. The outer width of the 11 speed chain isn't very different from the 10 speed and of course the pitch of all bicycle chains is 1/2". Feel free to contact me at if you have any other questions.


Avg. ride time: 10h 38m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.

Is the English threaded bb and the installation tool included? I'm guessing No, since you don't ask the buyer to select English v Italian thread...

Please confirm though

Responded on

You can run a 50/36t, but this is not a standard ring configuration for Shimano. You would nee to purchase an extra ring to make this happen.

Responded on

Thank you for the question, this crankset does not come with a bottom bracket or instillation tool. Please let us know if you have any other questions.

Can you run a 50/36 combination on the Ultegra 6800 crankset?

Responded on

Yes, the new shimano bolt patterns allow for whatever pattern you want where the old 5 bolts you would have to either get a standard or a compact.

I have just ordered a Jamis Renegade Elite which comes with a mid-compact 6800 52/36 crankset and the bottom bracket is an FSA PressFit 30 with Wheels MFG adaptors. I have just ordered the 6800 46/36 crankset from you and am curious if I need anything else to run this crankset with this BB setup?

Best Answer Responded on

You won't need anything else, you will be able to just swap those straight out

I ride a Tarmac SL3 Project Black (not the S-Works). Want to be sure the Ultegra crank and English BB will fit my bike. Currently have the older SRAM Red kit on the bike--don't know whether it's GXP or BB30. Am I in the clear with the Ultegra crank and English BB? Don't see any mention of GXP or BB30 specs on the Ultegra crank and BB pages. Thanks!

Best Answer Responded on

Hey there, excellent question. We are not a Specialized dealer, so I'm not expert on this but I believe that frame uses the Specialized propriety OSBB bottom bracket, which is essentially a BB30. An english bottom bracket does not fit this standard, nor does this crankset without the use of an adapter. To run the 24mm Hollowtech spindle on this, you'll need to use and adapter like the Wheels MFG BB30 adapter.

I currently have a Tarmac SL2 with 10 spd SRAM Apex and I'm wanting to switch to this Ultegra 6800. Can I use the 6800 with all of my Apex 10spd components? Same setup (52/36 to 52/36)

Best Answer Responded on

I have been using this crankset with a 10-speed Dura Ace 7800 system for almost 4000 miles without problems.

I currently have a Dura-Ace 7800 groupset on my Ridley Damocles road bike. My crankset has 53/39 chainrings, and I have a 12-27 (10 gear) cluster. My chain is a Ultegra 6700, less than a year old. If I buy this Ultegra 6800 crankset with 50/34 chainrings, do I also need to change to a 6800 chain? Any other changes needed (BB, or...)?

Responded on

I had a similar set up. I used the 10-speed chain w/o issue on this crankset, though I have heard the 11-speed chain works fine as well on a 10-speed cassette. You do not want to use a 10-speed chain on an 11-speed cassette. It's too wide.

Does this come in a 24mm spindle option?

Best Answer Responded on

Shimano cranks are only offered with 24mm spindles.

Let me know if you have any other questions.

I have this set already w/50 chainring

Question can I add a 53 chain ring to my existing Shimano Ultegra 6800 Crankset? I don't see separate chainrings for sale here?



Responded on

Hi Phil, thanks for your questions.

With the Shimano four-arm design and the 'top-secret' BCD you'll be able to run a 53 front chain ring. I'd also recommend sizing up your little ring as too high of a jump from your little to big ring will not allow your front derailleur to shift properly. We do not carry separate Shimano Chainrings, only complete cranksets are in stock.

Please let us know if you have any other questions.