Free 2-Day Shipping on Orders Over $50* — Limited Time Only
Take 10% Off Your Entire Order* »

Shimano Dura-Ace FC-9000 11-Speed Crankset

Sale $358.99 - $389.99 $489.99 27% off

Item # SHI0597

Select options
  • Select options
  • One Color, 170mm 50x34 ($389.99)
  • One Color, 170mm 52x36 ($389.99)
  • One Color, 170mm 53x39 ($389.99)
  • One Color, 172.5mm 50x34 ($389.99)
  • One Color, 172.5mm 52x36 ($389.99)
  • One Color, 172.5mm 53x39 ($358.99)
  • One Color, 175mm 50x34 ($389.99)
  • One Color, 175mm 52x36 ($389.99)
  • One Color, 175mm 53x39 ($389.99)
  • 100% Guaranteed Returns
  • Free 2-Day Shipping
    on orders over $50

Item # SHI0597

The total package.

11-speeds? Absolutely. Lighter weight? You got it. The marriage between a standard and compact crankset? Amen. The Shimano Dura-Ace FC-9000 11-Speed Crankset has once again revolutionized the market through common sense design that, for one reason or another, no one else has attempted. Finally, we can run either compact or standard rings on one spider, and even better, FC-9000 hasn't compromised a thing. In fact, it's lighter, just as stiff, and sleeker than 7900. Beauty and intelligence -- the total package.

Easily, Dura-Ace 9000's most striking and recognizable feature is the FC-9000 crankset -- and this is for good reason. On the surface, the FC-9000 is a complete departure from the traditional aesthetics of Dura-Ace. Gone are the days of the five-arm spider, and the necessity for a separate compact crankset has also fallen by the wayside. Instead, 9000 features a shift to a new four-arm spider design. This occured for many reasons, but most notably, it's because the four-arm spider matches rigidity with 7900 while shaving around 52 grams. However, 9000 has more than meets the eye. Like 7900, you'll find the continuation of Shimano's Hollowtech II construction. Over the past few iterations of Dura-Ace, this manufacturing methodology has played an integral role in attaining weight reduction without sacrificing Dura-Ace's superior stiffness.

It's this balance of Shimano practicing tried-and-true forging methods, while still treading into unknown waters, that makes Dura-Ace more of a continuation than an innovation. We mean this in the best possible way. Shimano has learned what works, and over the years, has continually added to, and improved, the ideology of Dura-Ace. Hollowtech II and Hollowglide are prime examples of this. Strategic placement of hollow aluminum throughout the crankset and chainrings allows more structural material to be used, and when coupled with Shimano's integrated bottom bracket, creates an unrivaled weight-to-stiffness ratio.

The four-arm spider amplifies this characteristic, but more important to Shimano, it embodies its 'rider-tuned' philosophy. In this, Shimano created 9000 to work for you, the rider. Case in point, the four-arm design and the 'top-secret' BCD allows for front chainring combinations from 50-34 to 55-42t on the same spider. Also new to this year, Shimano will be offering the crankset in a press-fit option.

The Shimano Dura-Ace FC-9000 11-Speed Crankset is available in sizes 170, 172.5, and 175mm and in 50-34, 52-36, and 53-39 chainring options.

  • Lighter, stiffer four-arm spider design
  • 11-speed-specific shifting ramps
  • Compatible with Dura-Ace chainrings from 50-34 to 55-42

Tech Specs

Arm Length:
170 mm, 172.5 mm, 175 mm
Bottom Bracket:
integrated Shimano Hollowtech II
BB Type:
Shimano Dura-Ace SM-BB9000
BB Threading:
English, Italian
Compatible Components:
Shimano Dura-Ace 9000
Recommended Use:
road cycling
Manufacturer Warranty:
3 years
Actual Weight:
One Color, 170mm 50x34: 637g; One Color, 170mm 52x36: 637g; One Color, 170mm 53x39: 637g; One Color, 172.5mm 50x34: 637g; One Color, 172.5mm 52x36: 637g; One Color, 172.5mm 53x39: 637g; One Color, 175mm 50x34: 637g; One Color, 175mm 52x36: 637g; One Color, 175mm 53x39: 637g

Reviews & Community


Write a review

    Add a:
  • Photos
  • Videos

No file chosen

Rather attach a photo from your computer?


Only jpg, jpeg, png, gif or bmp files please.

Submit ReviewCancel

Great cranks

  • Familiarity: I've used it several times

My bike came with a mid-compact set up which is the best for your all-around gearing needs. But for someone 200lbs, climbing 2k - 5k elevation gain becomes a bit more of a challenge, especially if you like to spin at high rpm's. So I called up and ordered the compact cranks and customer service shipped same day and covered my 2day shipping to guarantee I would receive before the weekend.
If anyone is wondering the 11-28 is a great pair d with the compact. Today I ordered from CC a 12-28 cassette to give me back the 16.

Avg. ride time: 6h 2m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.

Dura Ace quality can't be beat

  • Familiarity: I've put it through the wringer

Switched to this crank and chainset from BB30(PF30 actually) Hollowgram SI and Spidering because of astonishingly bad creak issues with Cannondale's bottom bracket solution. Just got tired of having to take everything apart and re-grease/re-locktite the cups and bearings to keep things running smoothly. So I went to this and Kogel bearings adapters and I could not be more pleased. A great way to run Shimano's 24mm standard on BB30 frames. The crank is super stiff, the weight is competitively low, and the chainrings make front shifting THAT much better. Even though Spiderings are renowned for their stiffness, Dura-Ace is just better. Not to mention being able to swap every imaginable combination of tooth sizes on the same crank and spider is a great thing to have.

I have a Guru Photon SL with a PF30 BB. Will this dura ace crankset work with that? What BB fitting do I need to buy with this crankset to use it on the Guru frame mentioned?

I know of a couple more options: 1) the adaptor kit from Wheels manufacturing. You continue to use your sealed bearings. The adapters slide in on both sides and convert your 30 into the 24mm in order to use the shimano cranks. The kit comes with the shims too. 2) CC sells a whole new bearing and sleeve from Rotor. Again adapting the 30 to 24mm. Check and see if cc has the steel bearing setup since the ceramic bearing setup is awfully expensive.

Avg. ride time: 4h 26m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.

I want a 52/36 with a 165mm arm...

Hello, noob question here!

Do I need to purchase non-driving side arm separately or do they come together? Because I don't see it in the picture.... haha

Hey Yongjang K,

These cranks are sold as a set so you will get both the drive and non-drive side arms.

runnng a few odds and ends and really want an upgrade. rear mech is ultegra 6600, cassette is 13.28, front derailleur is 105, shifters are 105 and crankset is ultegra 6650 53.39t. rear shiting is ok but front rings really clacky to change. can i swap in this crankset with my current set up or do i need to change more?

It is not recommended from Shimano that you use 11 speed parts with 10 speed parts. We do have amazing pricing on a whole complete Ultegra 6800 group set that you might be better off doing a complete upgrade. If you have questions you can reach me at

Would it be possible to run a 53x34 or 52x34 without negatively impacting shifting performance?

With a little fine tuning you should be fine mating a 53 with a 36, but not a 34, it's just too long of a stretch for the front derailleur. You can also match a 52 with a 34. With either one it will not be quite as quick in your shift as with the stock set up.

I have Gen1 Di2 10sp on my Wilier Cento1. I want to have a compact setup. The obvious solution is to get the FC-7900 compact crank. I need this because the standard setup has 130 BCD and compact 110.

Now i see that the latest FC-9000 groupset crank works with a range of rings from compact up past standard.

i know its not ideal but, could i use the FC-9000 11-sp crankset on my bike and leave everything else on the old 10sp setup including the chain ( i can adjust derailleur height, chain, etc as required)? My BB came with the bike and is SHimano compatible pushfit bearings which Wilier calls CNC Oversize bottom bracket but is also known as BB94

What do you think?

According to Lennard Zinn, it will work best with an 11-speed chain. Dura-Ace chains can be found online for $40, so that is the smart way to do it.

Will this crankset work with a BB86 bottom bracket? I currently have a press fit BB86 and thought I needed to change it to use this crankset. I was reading about the Ultegra BB and it saying its a BB86 and will work with all HollowTech cranks. Thank you for clearing up my confusion.

Best Answer

It depends upon the exact type of bb86. if it is a gxp bb86 it wont work but if you have used existing shimano or FSA cranks with the bb it will work just fine.

I am buying a 2015 SL5 Tarmac and Shimano...

I am buying a 2015 SL5 Tarmac and Shimano 9000 components.

I don't want to be changing from compact to regular cranks every time we go to the mountains.

Can I run a 53-34 chainring combination with the Shimano 9000 crankset?

Best Answer

Good question, the problem with the ration you want is that it is beyond 16 teeth difference it is 19 teeth difference. The Shimano road front derailleur's have a max difference of 16T so when we consider the ratio above it will not work because of the separation. If you have any other questions please email me directly at



I have the FSA Gossamer BB30 10sp with...

I have the FSA Gossamer BB30 10sp with Chimano 105. Can exchange the FSA for Shimano Dura-Ace 9000 ?

You will need adapters. You can get them from any online Seller.

Get a Praxis Conversion BB. Better option than using adaptors

Can I put a Dura Ace 9000 11speed 36t chain...

Can I put a Dura Ace 9000 11speed 36t chain ring on my Ultegra 6800 11speed crank?


Best Answer

yes you definitely can

I'm looking at buying a frame with a BB386....

I'm looking at buying a frame with a BB386. Will I be able to mount an FC9000 crank on my ride? Can't seem to find the answer on the Shimano site. Thanks!

Best Answer

Ive seen BH's bb386 EVO bike with this same shimano cranckset! you need the necesary adapters for shimano cranks...

Is it compatible with a Dura Ace 10 speed...

Is it compatible with a Dura Ace 10 speed groupset?

The Dura Ace 7900 crankset has been out of stock for months now...

Best Answer

Shimano told me that although not ideal it will work with their 10 speed systems. The difference being the chain rings on the 11 speed cranks are slightly narrower. I have been considering ordering the mid-compact crank for my 7800 Dura Ace bike.

Avg. ride time: 8h 47m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.

No 52/38 offered?

No 52/38 offered?

No 52/38 is offered, you'll need to purchase the 38t separately and do the swap. I have almost 2k miles on a 52/38 setup and works very well.

Can I use this crank on ultegra 11 speed...

Can I use this crank on ultegra 11 speed di2 system?

Best Answer

Yes, 100% compatible with Ultegra 11.

is this compatible with Ultegra 6700...

is this compatible with Ultegra 6700 derailleurs?

Best Answer

Should be OK, not perfect, as the ramps are different - therefor if you are using an Ultegra 6700 chain as well, could cause some crappy shifting under load. If you are going to get this, awesome - but I would go with a new 6800 chain first. Again, should work, but now as well as it could :)

Can you use this with a Dura-Ace 9 Speed?...

Can you use this with a Dura-Ace 9 Speed? I want a power meter and a new crank (running a FSA K Force) and this would be a nice upgrade until I am ready to go full 11 speed.

Best Answer

I wouldn't use this with a 9-speed, too many compatibility issues with the chain and derailleur. Would be legit to just wait - then pick up a screaming deal from Competitive when there is a super sale. Your 9-speed group as a whole will shift and perform better than a mis-matched group. :)

Stiff. So peppy and responsive.

  • Familiarity: I've put it through the wringer

So I never thought I could swap out a part on my bike and feel immediately shocked. This crank did it though. I had just come from a 7800 Dura-Ace SRM crank, when I went to a Stages Power meter version of this Dura-Ace 9000. The quickness and stiffness of the arms was immediately shocking in my first turn and acceleration out of the neighborhood on my first ride. Months later, I still remember the sensation of me looking down in wonderment at my bottom bracket and crank, wondering what on earth could cause what felt like, a 300% boost in crank stiffness. 1600 miles on it since march 2013.

Stiff. So peppy and responsive.

Hi, I have a "Specialized s work Rouber s4" is it possible to use this set? Thanks for the reply.

Tailwind, with what groupset are you running these cranks? Thanks

does it come BB30

does it come BB30

Best Answer

Doesn't come in a BB30, but you can get adapters and they work well. The Wheels Mfg is the best, without creaks or issues :)

Doesn't come in a BB30, but you can get adapters and they work well.  The Wheels Mfg is the best, without creaks or issues :)

Can the FC-9000 crankset work with my jamis Sl 10 speed