Deals for the Dirt—Save up to 55% on Mountain Gear»
  • Free Shipping on orders over $50*
  • 100% Guaranteed Returns

Out of Stock

Item # SNZ0231

 This model is no longer in stock.

Don't worry though, we have a lot more Downhill & Freeride Frames - Full Suspension in stock than that.

View similar in-stock products

Item # SNZ0231

Selected Option:

Add to cart Save add to wish list
  • 1.888.276.7130
  • Live chat

Description

We hope the competition brought its wood screws, because you're about to blow its doors clean off.

As good as the V10 was, Santa Cruz knew it could be far better based on what they learned from their earlier reincarnations of the Nomad and Blur series in carbon fiber. What was once an absolute terror on the World Cup circuit is now a full pound lighter, stiffer, and thoughtfully tweaked with input from Steve Peat and the rest of the Santa Cruz Syndicate riders -- the result is the V10 Carbon. If downhill is your game, then the V-10 Carbon sits at the top of your wish list.

For the 2012 Santa Cruz V10 the full carbon construction is limited to the front triangle. Even in its prototype stage, the V10 Carbon was ridden to wins at Maribor and Leogang with Greg Minnaar at the helm. Reports from the riders corroborate the results from the test bench. The carbon V10 is the stiffest bike that Santa Cruz has ever made. While we recognize the riders have much to do with the race results, the new frame deserves more than a minimum of recognition. Its plush and capable VPP rear suspension is adjustable from 215 - 254mm (8.5 - 10") of travel and works to not only control the forces from myriad obstacles on the typical downhill course, but it actively works to keep the rear tire on the ground, even while pedaling. After all, more grip on the trail means more control which means faster DH runs.

We know light isn't everything, especially if light means the bike rides like a noodle or is so delicate that one crash will wreck it. The V10 Carbon doesn't suffer in either regard. It's the lightest V10 yet, and it's also the strongest and stiffest. The front triangle is molded in one piece. This way Santa Cruz can precisely control the layup. And that the carbon fibers are continuous throughout, running from one tube to the next, assures the strongest tube junctions possible. The rear triangle is made from aluminum. Throughout the development process for the V10, Santa Cruz engineers found that it was the best material choice for the job out back due to the particular design constraints and stresses. They simply couldn't make it any stronger or lighter in carbon. At that point there was no reason to abandon the superior alloy part.

The frame pivots are massive, 15mm in diameter, and run on sealed bearings to ensure silky smooth suspension action. Santa Cruz V-10 Carbon DetailIn addition, these beefy pivots maintain the lateral stiffness of the bike, so the front and rear sections act as one, and so you'll have supreme stability over wallowing bumps in the corners. While the upper VPP link is carbon fiber, the lower link is CNC machined aluminum, and it has grease ports to make routine maintenance a five minute affair. The yoke for the lower shock mount employs flip-flop inserts that allow the travel adjustment. Making the switch from 10" to 8.5" travel mode nets you a corresponding slackening of the head and seat angles by one degree -- from 65° to 64° for the head angle. In the longer travel setting the bottom bracket height matches the old alloy V-10 at 14.8". In the shorter travel setting, the bottom bracket drops to 14.2".

The V10 Carbon is purpose built to go fast. To do that end, we sell it with a 9.5 x 3" Fox RC4 Coil rear shock. It allows both high- and low-speed rebound and compression damping adjustments to tailor the bump response for any type of DH course.

The Santa Cruz V10 Carbon - 2012 is available in Carbon Black/gold, and it comes in four sizes -- Small, Medium, Large, and X-Large. It requires a 30.9mm seat post, and it has ISCG-05 tabs to make mounting a chainguide a snap. It has clearance for tires up to 2.7" and accepts 203mm rotors, so feel free to go big and go fast. It uses an 83mm bottom bracket shell to create an optimal chain line for the 12 x 150mm rear axle (axle included). You'll also get a grease gun for the lower link, a tube of grease, and a neoprene chainstay protector. The frame has a two year warranty against manufacturing defects, while the bearings are guaranteed for life.

US Santa Cruz dealers are prohibited from shipping Santa Cruz Bicycles outside of the United States.

Tech Specs

Frame Material:
front triangle carbon fiber, rear stays aluminum
Suspension:
VPP
Pivot Type:
collet axle pivots
Rear Shock:
Fox DHX RC4 Kashima
Rear Travel:
215 mm - 254 mm
Recommended Fork Travel:
200 mm
Rear Axle:
12x150 mm thru-axle
Replaceable Rear Derailleur Hanger:
yes
Head Tube Diameter:
1.5in
Headset Included:
no
Bottom Bracket Type:
83 mm English
ISCG Tabs:
ISCG 05
Seatpost Diameter:
30.9 mm
Seat Collar:
34.9 mm Santa Cruz QR
Cable Routing:
external, full-length housing
Recommended Use:
downhill racing
Manufacturer Warranty:
5 years

Geometry chart

Santa Cruz

V10

Santa Cruz V10
Size Seat Tube Efective Top Tube Head Tube Head Tube AngleSeat AngleStackReachChainstayBB HeightWheelbaseStandover
10" Travel
S 17.5in
(44.5cm)
21.9in
(55.6cm)
4.9in
(12.4cm)
65.0 deg57.5 deg22.8in
(57.9cm)
14.2in
(36.1cm)
17.3in
(43.9cm)
14.8in
(37.6cm)
44.6in
(113.3cm)
29.3in
(74.4cm)
M 18.0in
(45.7cm)
23.4in
(59.4cm)
4.9in
(12.4cm)
65.0 deg57.5 deg22.8in
(57.9cm)
15.8in
(40.1cm)
17.3in
(43.9cm)
14.8in
(37.6cm)
46.2in
(117.3cm)
29.3in
(74.4cm)
L18.3in
(46.5cm)
24.3in
(61.7cm)
4.9in
(12.4cm)
65.0 deg57.5 deg22.8in
(57.9cm)
16.7in
(42.4cm)
17.3in
(43.9cm)
14.8in
(37.6cm)
47.1in
(119.6cm)
29.3in
(74.4cm)
XL18.5in
(47.0cm)
25.2in
(64.0cm)
4.9in
(12.4cm)
65.0 deg57.5 deg22.8in
(57.9cm)
17.6in
(44.7cm)
17.3in
(43.9cm)
14.8in
(37.6cm)
47.9in
(121.7cm)
29.3in
(74.4cm)
8.5" Travel
S17.5in
(44.5cm)
22.0in
(55.9cm)
4.9in
(12.4cm)
64.0 deg56.5 deg23.1in
(58.7cm)
13.8in
(35.1cm)
17.5in
(44.5cm)
14.2in
(36.1cm)
44.8in
(113.8cm)
28.7in
(72.9cm)
M18.0in
(45.7cm)
23.6in
(59.9cm)
4.9in
(12.4cm)
64.0 deg56.5 deg23.1in
(58.7cm)
15.4in
(39.1cm)
17.5in
(44.5cm)
14.2in
(36.1cm)
46.4in
(117.9cm)
28.7in
(72.9cm)
L18.3in
(46.5cm)
24.5in
(62.2cm)
4.9in
(12.4cm)
64.0 deg56.5 deg23.1in
(58.7cm)
16.2in
(41.1cm)
17.5in
(44.5cm)
14.2in
(36.1cm)
47.3in
(120.1cm)
28.7in
(72.9cm)
XL18.3in
(46.5cm)
25.4in
(64.5cm)
4.9in
(12.4cm)
64.0 deg56.5 deg23.1in
(58.7cm)
17.1in
(43.4cm)
17.5in
(44.5cm)
14.2in
(36.1cm)
48.1in
(122.2cm)
28.7in
(72.9cm)

Reviews & Community

What do you think of the

Santa Cruz Bicycles V10 Frame with DHX RC4 - 2012

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

  • Product review:
  • Share a video
  • Share a photo

How familiar are you with the product?(Optional)

Only jpg, jpeg, png, gif or bmp files please.

Save

Here's what others have to say...

Unanswered Question

are you gonna get any more of the 2012s...

Posted on

are you gonna get any more of the 2012s in? I'd love to snag one in a few weeks.

Are there any larges available

Posted on

Are there any larges available

Responded on

There aren't unfortunately. What's in the dropdown menu is what's in stock.

Responded on

could a 6'1" ride a medium?

Soooooo it isthe lightest V10 yet huh?....

Posted on

Soooooo it isthe lightest V10 yet huh?. Do'nt keep us in suspense.......How light is it Sparky. regards LP

Responded on

The Medium frame is just a hair under seven pounds. So?really light.

Will this go on sale soon? :)

Posted on

Will this go on sale soon? :)

Compiling options for this bike.
It'll be just a moment...