Free 2-Day Shipping on Orders Over $50* — Limited Time Only
Take 10% Off Your Entire Order* »

Ridley Fenix/SRAM Force Complete Road Bike - 2013

Out of Stock

Item # RID000F

Don't worry though, we have a lot more Pre-Configured Road Bikes in stock than that.

View Similar Products
Item # RID000F

Description

When Ridley set out to build the Fenix, the goal was to combine specific ride characteristics of its proven Damocles and Excalibur into an all-new, do-anything design. The result blends both of these frames' best attributes into a machine that delivers sheer speed, low weight, and overall stability. Welcome to the Ridley Fenix/SRAM Force Complete Road Bike - 2013.

As mentioned, Ridley tuned the Fenix to combine the best attributes of its Damocles and Excalibur lines. But, you're probably wondering what exactly these are? Well, starting with strength, Ridley incorporated the same Sharp Edge tube design that was developed for its first carbon frame, the Damocles. Essentially, the engineering ideology at work here is that of form following function. If you've ever taken a gander at Ridley's logo, you'll notice the Ridley "R" encased in the outline of a diamond. This isn't just a flamboyant demonstration of Belgian wealth and prosperity. In fact, it's a representation of Ridley's design philosophy — taking cues from natural, proven designs. Accordingly, Ridley has designed the oversized carbon tubing with the shape of the diamond in mind. The "sharp edge" means that the focused areas of the carbon layup are at the edges of the tubing. This not only guarantees a high level of strength and impact resistance, but it also translates to a lightweight composition. So, like the Damocles, the strength lies at the forefront, but with pages taken from the svelte Excalibur, the Fenix's strength-to-weight ratio goes off the charts.

Like the Excalibur, Ridley placed a focus on lowering the overall weight, while increasing stability and comfort. Accordingly, the Fenix has been constructed from a 24-ton, high modulus carbon fiber. This means that the carbon is designed to withstand 24 tons of pressure per-square-millimeter. So, the stronger the carbon fiber, the less material that needs to be used. And the less material that's used, the lower the overall frame weight. However, the light carbon design also translates to heightened levels of rigidity, which directly lends itself to an efficient power transfer to the rear triangle. Complementing this attribute are the Fenix's asymmetrical chainstays, oversized tube junctures, a PressFit 30 bottom bracket, and a tapered, 1.125 x 1.5in head tube.

For comfort, the Fenix features a tapered design down the seatstays that thin towards the middle before regaining their original size at the axle. Essentially, this creates a forced flex area for shock absorption on rough roads. And further along these lines, Ridley also gave the frame a medium-height head tube for increased vibration absorption and a comfortable position in the saddle. However, this isn't to say that this is a cushy gran fondo design. In fact, Mr. Greipel opted to ride the Fenix at the 2012 Paris-Roubaix. The tall, tapered head tube also permits a high level of stability, maneuvering, and control across the gamut of speed. These features are further accentuated by the use of Ridley's tried and true 4ZA carbon fiber fork.

For the build, Ridley spec'd the Fenix with SRAM's proven Force 10-speed groupset. The crankset is the FSA Energy 50/34t compact, which has been paired with a SRAM PG-1050 12-25t cassette out back. For the cockpit, the build features a 4ZA Stratos handlebar and 4ZA Stratos stem. Topping the 4ZA Stratos post is a Prologo Zero saddle. And in terms of wheels, the bike rolls on a pair of Fulcrum Racing 5s that have been cased in Continental Ultra Race tires.

The Ridley Fenix/SRAM Force Complete Road Bike - 2013 is available in four sizes from X-Small to Large and in the color White/red.

Tech Specs

Frame Material:
24T UD carbon fiber
Fork:
4ZA carbon
Fork Material:
carbon fiber
Headset:
1.125 x 1.5 in FSA Integrated Tapered Headset
Shifters:
SRAM Force
Front Derailleur:
SRAM Force
Rear Derailleur:
SRAM Force
Crankset:
50/34 t FSA Energy BB30
Bottom Bracket:
PressFit 30
Pedals:
not included
Cassette:
12-25 t SRAM PG-1050
Chain:
SRAM PC-1051
Brake Calipers:
SRAM Force
Handlebar:
4ZA Stratos
Stem:
4ZA Stratos
Saddle:
Prologo Zero
Seatpost:
4ZA Stratos
Wheelset:
Fulcrum Racing 5
Tires:
Continental Ultra Race
Tire Size:
700 c x 23 mm
Recommended Use:
road cycling and racing
Manufacturer Warranty:
5 years on frame

sizing chart

Bike size by rider height

|

Geometry chart

Ridley

Geometry Chart

 

Fenix
 

Seat Tube

(c-t)

Effective Top Tube

(eTT)

Stack

(S)

Reach

(R)

Head Tube

(HT)

Head Tube Angle

(HTo)

Seat Tube Angle

(STo)

Bottom Bracket Drop

(BBD)

Chainstay

(CS)

Wheelbase
XXS 45cm 51.5cm 50.5cm 38cm 11cm 72o 75o 6.8cm 40.5cm 96.9cm
XS 48cm 52.5cm 53cm 37.5cm 13cm 72o 74o 6.8cm 40.5cm 97.4cm
S 51cm 54.5cm 54.5cm 38.5cm 14.5cm 73o 73.5o 6.6cm 40.5cm 97.7cm
M 54cm 56.5cm 57.5cm 39cm 17.5cm 73.5o 73o 6.6cm 40.5cm 99cm
L 57cm 58.5cm 60.2cm 40cm 20.5cm 73.5o 72.5o 6.3cm 40.8cm 100.3cm
XL 60cm 60cm 62.5cm 40.5cm 23cm 74o 72.5o 6.3cm 40.8cm 101.2cm

Reviews & Community

REVIEWS

Write a review

    Add a:
  • Photos
  • Videos

No file chosen

Rather attach a photo from your computer?

Familiarity:

Only jpg, jpeg, png, gif or bmp files please.

Submit ReviewCancel
Unanswered Question

Hi my name is Mimma, I'm a women 4'11"...

Hi my name is Mimma, I'm a women 4'11" would this bike be ok for me, im live in the UK

Any opinions on the Ridley Fenix?

Any opinions on the Ridley Fenix?

Getting a Force drivetrain on the same frame ridden by Lotto Beisol in this year's Paris-Roubaix at this price is a pretty great deal. This was a little out of my budget but the review were all positive.



If I could have stretched my budget, this would be what I was riding right now.

will the sram force take a higher cog...

will the sram force take a higher cog cassette with 28 or 32?

should easily take the the 28, On the 32 I don't think so.

The stock derailleur will take a 28T cog but in order to use a 32T you would need to buy and install a Wi-Fli rear derailleur.