Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help
Earn Rewards
  • Just In
  • Learn

Reynolds
58 Aero Carbon Wheelset - Tubular

Be the first to review

Out of Stock

Don't worry though, we have a lot more Tubular Wheels in stock than that.

Shop Similar Products

Utah deep dish.

Chances are good that, if you're buying a deep carbon rim, you've got a pretty specific purpose in mind. While the 48 Aero wheels are billed as Reynolds' do-it-all hoops, going whole hog to the 58 Aero Carbon Wheelset is the best bet for any road-racing warrior who isn't looking to make a name in the KoM competition. Reynolds works hard to set the 58 Aero apart from the horde of mid-depth carbon rims, and the key to achieving distinction is what the Utah-based manufacturer calls Dispersive Effect Termination (DET).


DET Begins at the rim bed with a maximum width of 26.2mm, which brings the rim up to the tire's width and creates a generous cradle to glue it to. There are myriad benefits to this design, included reduced turbulence, which causes drag, and increased lateral rigidity and comfort. The rim's deep dish is shaped in a NACA-profiled, tapered V-shape that ends with a sharp trailing edge. The Aero's shape smooths airflow over the wheel, and when that air passes the spoke face, it's easily reattached at the rear of the rim to reduce stall. DET also means that this stall-free sweet spot extends to 20 degrees of yaw — a full 7.5 degrees more than the competition.


It's rare to have a real-world circumstance of a straight-on head wind. In reality, you spend 95% of your riding time between 0 and 20 degrees of yaw with a wind angle anywhere from 0 to 100 degrees in relation to the bearing. A lot of deep rims in this situation act as sails, pulling the bike sideways during sudden changes of direction in windy conditions — an effect that's far more noticeable when the rims get over 50 millimeters deep. You're choosing a deep rim because you want the aerodynamic benefits, but poor handling can make any speed gain come to nothing if you're thrown off the road or into another cyclist by sudden gusts.


While it's impossible to completely cure this ailment, Reynolds' rim-shaping DET distributes side forces (read: cross wind) so that the center of pressure is pushed beyond the center of mass. This means the pulling due to cross wind and the like is much less pronounced, and — while all deep rims are still affected by wind — the 58 Aero wheels are very predictable in how they respond, so you can ride confidently in windy conditions.


Since it's kind of jargony information, you may not be interested to know that DET's center of pressure maximizes the forward thrust vector (a quantity that has direction and magnitude) and the rim shape increases lift and decreases turbulent flow. But you'll definitely enjoy the forward thrust that all that jargon translates into on the bike. Essentially, this system works almost like a turbine, generating extra watts of propulsion from the wind. The legendary DT Swiss internals of the Reynolds hubs mean that those watts won't be wasted.


And now for braking. You knew it was coming, because it always comes up eventually with carbon rims. So let's get this over with. The 58 Aero's braking is — wait for it — actually really solid. Reynolds addresses the poor braking of most carbon rims with the Cryogenic Glass Transition Braking System (CTg). CTg incorporates a temperature-conductive laminate at the brake track's transition points that withstands higher levels of heat than typical carbon laminates (around a 100 degree dispersion). When paired with Reynolds' polymer Cryo Blue brake pads, this laminate makes braking more predictable and less finicky feathering on fast descents.


The Reynolds 58 Aero Carbon Tubular Wheelset includes two pairs of Reynolds Cryo Blue Brake Pads. Reynolds strongly recommends only using its proprietary pads, and the use of any other brake pads will result in a void of your warranty. The wheels also include a wheel bag, RC Race Skewers, and rim strips.


Material
carbon fiber
Rim Width
external 26.2 mm, internal 16 mm
Rim Depth
58 mm
Front Hub
Reynolds Racing Design w/ DT Swiss 240 Internals
Front Hub Type
quick-release
Rear Hub
Reynolds Racing Design w/ DT Swiss 240 Internals
Rear Hub Type
quick-release
Spokes
bladed
Front Spoke Count
16
Rear Spoke Count
20
Brake Compatibility
Reynolds Cryo Blue
Wheelbag
yes
Complete Set Weight
1340 g
Recommended Use
road cycling
Manufacturer Warranty
2 years

What do you think about this product?

View

Selecting an option will reload the available reviews on the page

Sorry, we don’t currently have any of those types of reviews for this product.