Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help
Earn Rewards
  • Just In
  • Learn

Niner
SIR 9 Mountain Bike Frame - 2016

Be the first to review

Out of Stock

Don't worry though, we have a lot more Hardtail in stock than that.

Shop Similar Products

Steel will always be real.

Aside from an occasional oddball, like magnesium or something from the kingdom Plantae, material choices for mountain bike frames are aluminum, steel, and carbon fiber. Each one has distinct advantages and disadvantages, and the amount of time that's been spent deviling into their nuances is unfathomable. But, based on common deductions, there are solid reasons why Niner would continue to offer an updated S.I.R. 9 among its carbon and aluminum 29ers.


The S.I.R. 9, along with the alloy AIR 9, launched Niner into mountain biking's limelight. And it's hard to believe that the S.I.R. 9 is already approaching eight revolutions of the big yellow orb since it began humiliating bouncy bikes with lesser wheels. In that time, we've seen carbon eclipse ferrous and aluminum chassis due to gram counters' love affair with fibers and epoxy. But, steel still holds its own when it comes to ride quality and value.


Most manufacturers pick either aluminum or steel for a price-point line. Niner chose to use both -- alloy for its entry level line, while reserving steel for the seasoned rider who can appreciate its distinct ride characteristics, and who doesn't need to drain a bank account on a carbon rig to chase KOM's. If you're not up to speed on the differences between steel and aluminum, the quick and dirty is that aluminum is intently stiffer and lighter, so it tends to accelerate quicker, but it can be more fatiguing due to vibration -- imaging holding onto a jackhammer all day. Steel, on the other hand, dampens trail chatter and has a natural spring-like nature that results in lively and encouraging handling on singletrack. In this case, Niner uses proprietary Reynolds 853 tubing with custom S-bend rear seatstays and chainstays. The tubing's wall thicknesses, including the down tube and top tube, are tweaked both externally and internally to produce the best possible ride quality for each frame size.


Clean TIG welds provide the strength, while short chainstays and a steep head angle offer the maneuverability that tight, twisty trails require. Niner also gave the S.I.R. 9 a radically sloping top tube for plenty of stand-over clearance in all its sizes. From the beefy tire clearance to the down tube shaped to avoid interference with fork crowns, everything about this frame shows the design time invested. And because of this extensive R & D, and willingness to use new standards and technology that benefit 29ers, Niner's developed a reputation for being ahead of the curve. Good luck trying to find another steel frame that has 142mm rear spacing, a post mount rear caliper, and the option to run just about any drivetrain configuration out there -- from single speed to multi-speed.


The S.I.R. 9 features Niner’s exclusive Bio-Centric EBB technology. An essential design element of the Bio-Centric system is that the cups lock to the bottom bracket shell’s flange. Once the EBB is in position, one bolt tightens the eccentric to the flanges, providing 360 degrees of purchase, while eliminating any chance for creak-causing dirt or debris to contaminate the interface. Also, because forces are no longer placed against the inside of the shell, it won’t round out or suffer from the over-tightening issues of traditional EBB designs.


This simple solution makes the S.I.R. 9 the true Zen-machine that SS bikes should be. The wheel can be removed without hassling with the caliper position or chain tension, and you’re guaranteed perfect dropout-to-frame alignment -- unlike individually adjustable sliding drops. All that you need to do to set up the S.I.R. 9 for gears is to add the derailleur hanger dropout and swap the EBB for one of Niner's CYA press fit adapters.


If you plan on going the geared route, Niner recommends doubles not exceeding 26/39 chainrings for SRAM, and 28/40 for Shimano. However, a standard triple will pose no problems. The rear triangle will accommodate a 2.4in tire, and you can run a 160mm rear rotor. You’ll need a bottom pull, high mount front derailleur with a 28.6mm clamp. The S.I.R. 9 uses a 27.2mm seatpost, a 73mm BB (only external style bottom brackets work with the EBB), and a 44mm tapered headset. The maximum chainring size varies depending on the position of the BioCentric EBB insert. At the most rearward position, the Niner recommends running no larger than a 30t chainring, and when in the forward position, it will accept a 36t ring. It comes with a Maxle rear axle.


The Niner S.I.R. 9 Mountain Bike Frame is available in the colors Arctic White and Tamale Red and in four sizes from Small to X-Large.


Details

  • Reynolds 853 steel frameset
  • 142mm rear spacing
  • Eccentric bottom bracket
  • Item #NNR0030
Frame Material
steel
Suspension
hardtail
Head Tube Diameter
[upper cup] ZS44/28.6, [lower cup] EC44/40
Headset Included
yes
Bottom Bracket Type
Niner Bio-Centric EBB
Cable Routing
external
Front Derailleur Mount
28.6mm clamp-on, high-clamp
Derailleur Pull
bottom
Compatible Components
Shimano, SRAM
Seatpost Diameter
27.2 mm
Recommended Use
cross country
Manufacturer Warranty
2 years on frame

What do you think about this product?

View

Selecting an option will reload the available reviews on the page

Sorry, we don’t currently have any of those types of reviews for this product.