Annual Tour Sale—New Deals Added Daily, See the Latest »
  • Free Shipping on orders over $50*
  • 100% Guaranteed Returns

Out of Stock

Item # LED0107

 This model is no longer in stock.

Don't worry though, we have a lot more Mini Pumps in stock than that.

View similar in-stock products

Item # LED0107

Description

Lots of pump in a little package.

If you're the type of cyclist that doesn't like to spend half a training-ride inflating a tire with a half-assed mini-pump, then look no further because the Leyzne Road Drive CFH was designed for you. Leyzne made the Road Drive CFH 30% more efficient by using an oversized piston and shaft -- this means more air with less strokes. The Road Drive CFH also features a unique high-pressure steel braided hose for easy attachment and no more broken valve stems. When finished the hose slides conveniently inside the body of the pump for super-sleek transport. Finally, if you're in a real hurry, the all-in-one-mount, CNC-machined aluminum bracket holds one 16oz CO2 cartridge and attaches to the steel-braided hose for super-quick inflation.

  • High-pressure steel braided hose uses a flip chuck for compatibility with Presta & Schrader and works with threaded CO2 cartridges
  • 100% CNC-aluminum construction for years of use
  • Simple bracket installation frees-up pocket space in your jersey

Tech Specs

Dimensions:
232 x 19.5 mm
Valve Type:
, Schrader
Max Pressure:
165 PSI
Claimed Weight:
113 g
Recommended Use:
Road Cycling

Reviews & Community

What do you think of the

Lezyne Road Drive CFH

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

  • Product review:
  • Share a video
  • Share a photo

How familiar are you with the product?(Optional)

Only jpg, jpeg, png, gif or bmp files please.

Save

Here's what others have to say...

4 5

Good pump

  • Familiarity: I've used it several times

Like this pump a lot, but like any micro pump it doesn't get anywhere near the 165 psi it says it will. You'll be able to get 60-80 psi into your tires and limp home. Nice to have a backup if your C02 cartridge fails somehow or you get two flats in a ride.

5 5

Great System

  • Gender: Male
  • Familiarity: I've used it several times

I have been very happy with the pump that comes with this setup. It pumps quickly and is small enough that it stays out of my way. I really like how it can be mounted under the waterbottle cage, keeping everything very accessable. It also comes with a small rubber gasket that goes around the pump to keep it from vibrating against the frame which was a nice touch. All in all I am very happy with this purchase.

Great System
5 5

Great Pump. I would definitely recommend

I really like the other version of this pump, the pressure drive and like others, I have been on a ride and then realized I needed to tighten the removable stem. I happen to have a spoke tool on my multi-tool and it works fairly well. I have now made sure that I don't have any of those types of tubes. Riding for a handful of years recreationally, I am kind of curious why the stem is removable in the first place...it's not like you're going to need to replace it. Maybe I'm missing something but the removable and replaceable stem seems completely useless and only apparent when using a screw on style pump.

I see now they have this road drive CFH and I think I'll opt for this one next time and see if there's any difference in the pump since it'll go up to 160psi according to the specs.

Responded on

Presta valves have removable cores so that Valve Extenders can be used to lengthen the valve stem (36mm, 48mm, or 60mm) to clear the rims and fairings on deep section carbon wheels. You remove the core, screw on the extender, and the screw the core back into the now longer stem.

Lezyne CFH

Posted on

Lezyne CFH pump in use

2 5

P.O.S. Looks cool, works horribly.

Lezyne might have their marketing dialed, they might have Cavendish to promote their products, but my experience so far with all their product is less than satisfying. I've been around bikes my whole life, have used dozens of pumps and the Road Drive CFH straight up sucks. I bought one for my wife because the hose makes it easy to NOT break valve stems—but 9 times out of 10 when you attempt to unscrew the hose from the Presta valve it unscrews the valve core letting all the air out of your tire. My wife had tons of issues with this, one on the side of the road. I figured it was her, so I tried to use the Road Drive again & again. It pulled the valve core every time! If you screw it on enough to get air in the tire it pulls the valve core, if you don't screw it all the way on it doesn't get air into the tire. It may look great but it's worthless.

Responded on

There have been several claims of removing valve cores from individuals over the years. There are essentially two was to combat this. One is to tighten the valve cores before using the tubes. This can easily be done prior to your ride using a pair of pliers. This procedure can become like any pre-ride inspection just like checking your other essentials. This quick step can ensure that you will not loose air along the way, and when you do have the unfortunate event of a flat tire the tube can be patched or replaced with relative ease. The other way to combat the issue is to purchase tubes with a one piece valve stem/core, but that is not always an option in a pinch. The Road Drive CFH was designed to be a versatile essential to any ride combining the ease of CO2 with the reliability of our award winning Road Drive pump. All Lezyne products are built with the cyclist in mind as we at Lezyne are all cyclists... We use and abuse all of the products we design prior to release to the public.

Responded on

In response to your advice about tightening the valve core, that's great, but unfortunately I don't carry as set of needle-nose pliers with me on my rides. Secondly, when I help out a fellow cyclist on the side of the road by attempting to add air to their tires, and end up pulling the valve core on their tube because THEY also don't carry pliers with them it's really frustrating. SO, I stand corrected, IF YOU BUY THIS PUMP MAKE SURE YOU ALSO PURCHASE A SET OF PLIERS TO CARRY WITH YOU ON EVERY RIDE BECAUSE INEVITABLY YOU WILL COME ACROSS A VALVE CORE THAT ISN'T COMPLETELY TIGHT... OR YOU COULD JUST BUY A BLACKBURN PUMP.

Responded on

Also, if "there have been several claims of removing valve cores from individuals over the years," maybe Lezyne should fix the problem? Just a thought.

Responded on

It's interesting that chaz is indicated as a current employee of realcyclist.com. Do all your employees tag the products you sell as "P.O.S."? How classy.

I do not own this particular pump, but I have the Lezyne Pressure Drive and the Classic floor pump, both using the same screw-on connector as this one. I've used these two pumps on seven bikes and a variety of tubes over the past two years. I've unscrewed a valve core exactly once. I've also used a Blackburn as chaz recommends, and I can't count the number of times I've bent a valve stem or ripped a hole in the tube due to torquing the pump directly against the stem, rendering the tube unrepairable. So which shall we blame? The pump or the POS tube? In the ONE case where I unscrewed a valve core, I blame the POS tube for not properly installing their core. It was easily fixed by tightening. In the many cases where I've ripped the valve from the tube, I blame the POS design of a clamp-on pump where you are forced to torque against the valve to achieve rideable PSI. Opinions vary. I think this review by chaz is unwarranted.

Responded on

The better solution is to use Michelin or Vittoria tubes with non-removable value cores! The Vittoria tubes are about the best on the market. The Michelin A1 Airstop Tube holds air the longest. Now you can leave your pliers at home. BTW broken value stems often result from having too long of a value stem in the first place. Pick a shorter length stem to avoid this problem.

Responded on

i too have had valve stems come out....easy fix use the the brass schrader adapter, works way better no air loss when unscrewing the hose, should have one on bike for gas station fills anyway...

Responded on

You might have over-tightened the hose onto the valve stem and permanently smashed or cut the little red "O" ring to the point where it no longer functions properly. Replace the "O" ring, and your pulling-cores problem should go away.

Many of my training partners ride with Lezyne pumps, and we never have problems pulling cores. I personally ride with just the hose (purchased as a replacement part, sans pump) and some CO2 cartridges. It works great.

I bought a Pressure Drive CFH pump for my 12 year old Boy Scout so he could pass his Cycling Merit Badge. He was able to inflate the tires on his Trek to 110 psi by himself using both the pump, and the CO2, both without pulling cores. Did I mention he is twelve?