The Bib Short Guide—Shop This Year’s Standouts »

HED Stinger 7 Carbon Tubular Wheelset

Out of Stock

Item # HED0042

Don't worry though, we have a lot more Tubular Wheels in stock than that.

View Similar Products
Item # HED0042


The Hed Stinger 7 FR Tubular Wheelset neatly fills the gap between Hed's Stinger 6 and Stinger 9, but more than just numerically. Where the 6 is a well-rounded racing wheel, and the 9 purely for racing against the clock, the Stinger 7 is a dangerous weapon aboard the bike of a capable sprinter. Yes, it is true that Hed engineers reinforced the sidewalls of the 75mm-deep carbon rims, making them extremely stiff and responsive and an obvious choice for a powerhouse like Cavendish or Greipel. But what sets the Stinger 7 apart from other wheels optimized for those last few blistering seconds of a race, and adds to its versatility, is Hed's Stability Control Technology which handles all of the other kilometers leading up to those final 200 meters. SCT specifically addresses the Stinger 7's shape to improve stability in crosswinds, thus countering one of the biggest drawbacks to running deep section wheels. Hed claims their Stability Control Technology provides the same aerodynamic advantage of a 75mm deep rim, but won't let you get blown across the road when the wind shifts direction.

In addition to Stability Control Technology, Hed engineers also incorporated C2 Technology into the Stinger 7. C2 stands for two Cs: lower coefficient of rolling resistance (Crr) and better aerodynamics (Cda). The rims on the Stinger 7 Wheelset are 23mm wide when most rims are around 19mm, and it makes a big difference. The wider rim matches the tires that most folks use on their race bikes -- 23mm. A 23mm rim paired with a 23mm tire changes the tire's footprint. It grips better in a straight line, and it grips better in turns because the tire has a straighter sidewall and deforms a bit less at a given pressure. A 23mm tire on a 23mm rim also has lower rolling resistance. Hed sent the wheels to Continental Tires for testing. Conti's engineers shrugged their shoulders and figured there was no difference, but they put them in their testing jig and ran the tests anyways. As it turns out, Hed's C2 rim design offers 18% less rolling resistance than typical narrower rims. And because of the smoother transitions from tire tread, to sidewall, to rim, and finally to the trailing edge of the rim, the airflow is less disturbed. The result is a more laminar air flow and a lower aerodynamic drag. It might have seemed crazy at first blush, but the industry is following. Yes, it's a good idea to run 23mm or wider tires on any of Hed's C2 wheels.

The Stinger 7s come standard with HED's Carbon Flamme Rouge (FR) Sonic hubs. The hubs have a carbon fiber center section and use a minimalist shape in order to maximize aerodynamic characteristics. Both the front and rear hubs run ABEC5 bearings on oversize aluminum axles: 12mm in front, 15mm in rear. The oversized axles are stiff, and with less deflection the bearings run smoother and with less drag. The front hub has aluminum end caps with a carbon-fiber center, and the rear hub is all aluminum with a grease port covered by a carbon-fiber cap. The pawl mechanism for the cassette body ratchets on a titanium ratchet ring.

The front wheel is laced radially using 18 Sapim CX-Ray bladed spokes, while the rear wheel has 24 spokes laced in a two-cross pattern on both sides. The spokes are threaded to aluminum nipples. The two-cross lacing pattern on the rear was used to stiffen up the rear wheel so that no power would be lost to wheel flex, as a result more power is channeled to driving the bike forward.

The rear wheel is available to fit Campagnolo or Shimano/SRAM cassettes and the freehub bodies are easy to swap out with two 5mm hex keys. The set comes with valve extenders and Hed titanium skewers. Any carbon-specific brake pad should work well with HED's braking track. The recommended rider weight limit for the Hed Stinger 7 Carbon Tubular Wheelset is 210lbs.

Tech Specs

[rim] carbon fiber
Rim Width:
28 mm
Rim Depth:
75 mm
Front Hub:
HED Carbon FR Sonic
Rear Hub:
HED Carbon FR Sonic
Front Spoke Count:
18 radial
Rear Spoke Count:
24 2-cross
Complete Set Weight:
1626 g
Recommended Use:
road racing, time trial
Manufacturer Warranty:
2 years

Reviews & Community

What do you think of the

HED Stinger 7 Carbon Tubular Wheelset

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video


Only jpg, jpeg, png, gif or bmp files please.

Submit Cancel