36 FLOAT 27.5 140 RC2 FIT Fork - 2015
Out of Stock
Don't worry though, we have a lot more 27.5-inch Suspension Forks in stock than that.
Shop Similar ProductsReclaiming its place.
Continuing the expansion of its new 2015 Float 36mm stanchion lineup, the new Fox 36 FLOAT 27.5 140 RC2 FIT Fork brings the company's revolutionary new fork chassis to a 140mm-travel length, making for a virtually perfect all-mountain companion.
The 36's chassis was the first area of scrutiny. The crown has been redesigned to be both lighter and lower, resulting in a shorter axle-to-crown measurement across the board, so that installing the fork means minimal — if any — alteration of the bike's front-end geometry, unlike when installing some other forks, including FOX's previous 36 series. The fork's lowers have been re-engineered to be lighter and stiffer, as well, resulting a chassis with greater rigidity, but weight figures that are very close to that of its smaller 34 series of forks. A newly formulated, higher-viscosity proprietary fork oil is now used, too.
The 36 essentially comes in two families: the adjustable TALAS versions and the non-adjustable FLOAT versions, like this one. On both, however, for 2015, the air spring systems have been revised. A reduced number of seals means that both operate more smoothly, but that's not all. TALAS springs have been re-tuned to ramp-up more toward full compression, making them more stable under big hits and extreme terrain, and thus friendly to more aggressive riders. The FLOAT forks now include volume-reducing spacers so that riders can fine-tune the system's ramp-up rate. The letters FIT designate that the fork is equipped with FOX Isolated Technology damper, which means that the fork's damper sits in an air-tight bladder, as opposed to a more common open bath system, making the damper more resistant to debris contamination and thus remaining smoother and more consistent between maintenance intervals.
The FLOAT acronym on the 27.5-inch 36 fork you see here stands for FOX Load Optimum Air Technology. It's not travel-adjustable on-the-fly like the TALAS version, but as mentioned, the volume of the FLOAT cartridge can be adjusted via internal spacers to more precisely dial in your preferred performance characteristics, in conjunction with the RC2 adjustment system. If you're wondering, the RC2 designation in the fork's title stands for Rebound, and the two different Compression settings (high-speed and low-speed) can be adjusted to dial the fork to your tastes.
The 2015 Fox FLOAT 36 27.5-inch 140 RC2 FIT Fork is for use with 27.5-inch wheels only, comes only in the color Black, and has a 1.125-1.5-inch tapered steerer tube. The new front axle system is convertible between both 15mm and 20mm thru-axles with included parts.
- Travel
- 140 mm
- Stanchion Material
- Kashima-coated aluminum
- Lower Material
- magnesium
- Wheel Size
- 27.5 mm
- Steer Tube Diameter
- 1.125 - 1.5 in
- Stanchion Diameter
- 36 mm
- Damper
- FIT
- Axle
- 15 mm, 20 mm
- Brake Compatibility
- post mount
- Claimed Weight
- 2000 g
- Recommended Use
- trail, all-mountain, enduro
- Manufacturer Warranty
- 1 year
Reviews
Q&A
What do you think about this product?
View
Selecting an option will reload the available reviews on the pageSorry, we don’t currently have any of those types of reviews for this product.
Need Expert Advice?
Our Gearheads Can Help