Home Page

Cart, contains 0 items

When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Expert Help
Earn Rewards
  • Just In
  • Learn

FOX Racing Shox
32 Float SC 29 100 3Pos-Adj FIT4 Fork (51mm Rake) - 2017

Be the first to review

Out of Stock

Don't worry though, we have a lot more 29-inch Suspension Forks in stock than that.

Shop Similar Products

Snappy.

The 2017 FOX Racing Shox 32 Float SC 29 100 3Pos-Adj FIT4 Fork (51mm Rake) brings all the lauded revamps found in the 2016 line of forks and adds Fox's brand-new Step-Cast chassis, along with a bit of rake to decrease the bike's trail and make low-speed, nimble moments easier to handle. The result of that rake is less "dead" space between the steering axis and the hub, which offsets the floppy, low-speed steering issues that arise from the longer trails produced by today's taller wheels and slack geometries. Handling stays 26er-sharp whether you're climbing or cleaning switchbacks and tricky terrain.


Step-Cast presents as stepped cutouts in the lowers of the fork that open up extra clearance for rotors and spokes while narrowing the fork's stance by 10mm. This means less overall material and less weight, which, when paired with the hollowed out lowers, results in claims that this fork is one of the lightest on the market. Whether you're out for a Sunday social spin or nervously toeing the start line, this lightweight construction makes for a precise, responsive ride.


The FIT4 Damper's puffed out, 10mm shaft increases oil flow to the base valve, allowing the fork to ride high for quick, controlled recovery during everything from big, square hits to successive, small impacts. The 3-position FIT4 system also takes the reigns from the old CTD system, changing the names from the overly-prescriptive categories of Climb, Trail, and Descend to a graduating scale covering Firm, Medium, and Open. While this change may read like an exercise in semantics, it entails a radical realignment of the 36 Float's capabilities that addresses virtually every issue we've had with CTD's damper in the past.


FIT 4 migrates the adjustable sub settings from CTD's median Trail mode to the new Open setting. Open encompasses both Descend and Trail in order to take full advantage of the fork's high ride by handling most compression duties. This makes the fork that much more relevant to five-inch situations, combining better small-bump compliance with more confident tracking across root lattices and rocky moonscapes. It doesn't wallow and handling stays on point.


The Medium setting migrates much deeper into the firm side of compression than the Trail setting did, so it'll suffice in most conditions that don't require use of the big-bottomed Open setting. The Firm setting remains self-explanatory: an XC lock-out for turning on the afterburners when terrain allows. It'll likely see much less use in the new system, but we still appreciate Firm while riding to the trailhead or transitioning on gravel roads.


The Float air spring now omits the negative coil in favor of a self-equalizing air assembly. This is similar to the air spring chamber system that made the re-worked 36 series such a success, and its omission of a steel coil is a key contributor to the overall weight loss. Finally, its system of spacers lets you easily temper the air shock's volume for dialing the mid stroke.


Details

  • FOX's cross-country fork drops some weight with an all-new chassis
  • Stepped lower leg design narrows stance without reducing rotor clearance
  • 51mm rake for snappy handling
  • 100mm of travel smooths out rough trails
  • FIT 4 damper provides 3-position adjust for varied terrain
  • Customize stroke with air spring volume spacers
  • Item #FRS004U
Travel
100 mm
Stanchion Material
Kashima-coated aluminum
Lower Material
magnesium
Wheel Size
29 in
Steer Tube Diameter
1-1/8 - 1-1/2 in tapered
Stanchion Diameter
32 mm
Spring Type
Float Air
Damper
FIT4
Adjustability
3-position adjust
Lockout
yes
Axle
15 x 100 mm thru-axle
Max Rotor Size
180 mm
Brake Compatibility
post-mount disc
Recommended Use
cross country, mountain bike
Manufacturer Warranty
1 year limited

What do you think about this product?

View

Selecting an option will reload the available reviews on the page

Sorry, we don’t currently have any of those types of reviews for this product.