48 Hours Only—Buy Castelli Bibs, Get a Free Castelli Jersey »
  • Free Shipping on orders over $50*
  • 100% Guaranteed Returns

Out of Stock

Item # EAS0078

 This model is no longer in stock.

Don't worry though, we have a lot more 29" Mountain Bike Wheels - Clincher in stock than that.

View similar in-stock products

Item # EAS0078

Description

What a 29er should feel like.

The Easton XC One Disc 29in Wheel uses straight-pull stainless steel spokes to increase lateral stiffness and give your 29er a whole new feel on the trail. This wheel also includes a bomber XC1 hub to keep you rolling smoothly and handle the harshest of conditions. Easton created this tough wheel for long, rough rides, so make sure you have it on your 29er before you head out to ride Porcupine Rim as a loop.

Tech Specs

Material:
[rim] 100% aluminum, [hub] 80% aluminum, 20% steel
Front Spoke Count:
24
Front Hub:
Easton
Rear Spoke Count:
24
Rear Hub:
Easton
Spoke Material:
steel
Spoke Nipple Material:
aluminum
Axle Type:
(front) 9 x 100 mm, (rear) 10 x 135 mm
Brake Compatibility:
6-bolt1
Wheelbag:
no
Complete Set Weight:
1585 g
Recommended Use:
XC
Manufacturer Warranty:
1 year

Size chart

Mountain Bike Tires

 

Use this chart to estimate what size tires would work for your inner rim. **Always check with the tire and rim manufacturers to determine exact tire/rim compatibility.

 

Rim/Tire Guideline Chart
 Tire Size
Rim 15-17mm 1.8-2.2in
(4.6 - 5.6cm)
Rim 17-19mm 2.1-2.4in
(5.3 - 6.1cm)
Rim 19-25mm 2.3-2.5in
(5.8 - 6.3cm)
Rim 25-30mm 2.5-2.7in
(6.3 - 6.9cm)

Reviews & Community

What do you think of the

Easton XC One Single Speed Disc Wheelset - 29in

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

  • Product review:
  • Share a video
  • Share a photo

How familiar are you with the product?(Optional)

Only jpg, jpeg, png, gif or bmp files please.

Save

Here's what others have to say...

1 5

Don't waste your time!!!

Don't waste your time! They're cheap for a reason.
You will waste countless hours getting them setup and then when they fail (and they will) you will be stuck with a non-tubeless wheel set. (Bring a long an extra tube or two because you will need them on your when you blow the bead.) The rim hook is not good and you will blow a tire or two off.

I really wanted them to work so badly, but it was a waste of time and money.
Buy the American Classic 29er Single Speed wheel set. You will be so happy.

I do own an Easton Tubular road wheel set and they kick ass, but the XCone is a piece of sh*t.

Unanswered Question

Are these wheels tubless ready?

Posted on

Are these wheels tubless ready?

Will this wheelset work for bikes with...

Posted on

Will this wheelset work for bikes with track ends? (as opposed to an EBB or sliders)

Responded on

Assuming that you are talking about horizontal drops, yes, they will work. Although you're probably going to want some form of tensioner on the hubs to keep the pedaling torque and braking forces from causing the hub to slide in the drops.

Responded on

The rear wheel offers an optional bolt on axle for just that kind of application. It has stainless bolts that thread into the axle with 6mm hex wrenches. I can't remember if I got the axle with the wheels or had to request an upgrade, I think it was the latter. Whatever the case, I haven't looked back to the qr skewer set up. Why would you want to hold your wheel on with a coat hanger?

The removal of the old axle can be tough but it ain't rocket surgery. A couple passes of the directions was helpful, but I think a lot of the struggle factor is determined by which axle cap breaks loose first. You have a 50/50 chance of loosening the desirable side first. Good luck.

If I can get you any info on the bolt on axle option, I'll plug it in below here....