Sale $86.39 - $93.99 $98.95 13% off

Item # DTS0035

Select options
  • Select options
  • Black, QR ($93.99)
  • Black, 10x135 ($93.99)
  • Black, 12x142/12x148 ($86.39)
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # DTS0035

Swiss x SRAM.

SRAM's XX1 11-speed drivetrains are becoming more and more popular, and that means the need for corresponding components is increasing, too. DT Swiss is right there with SRAM, and its XD Driver is designed to make certain DT Swiss hubs compatible with XX1. Just swap out the freehub body, replace it with the XD, and you'll be ready to enjoy the simplicity and weight savings of XX1 without the need for tools, a new wheelset, or a total rebuild.

  • Aluminum
  • Designed to work with SRAM XX1 11-speed drivetrains
  • Tool-free installation
  • Compatible with DT Swiss 180, 190, 240, and 350 hubs
  • Works with 10x135mm and 12x142mm axles

Tech Specs

180, 190, 240, 350
Recommended Use:
mountain biking
Manufacturer Warranty:
limited 2 year
Actual Weight:
Black, 10x135: 51g

Reviews & Community

Unanswered Question

I have a 2014 Specialized Stumpjumper Comp hardtail with the stock wheels (roval rims/dt Swiss spokes/ specialized hi lo rear 135mm QR). Will this freehub work on my wheel so I can fit the Sram 10-42 cassette? If not, is there one for sale here that will? Thanks!

Avg. ride time: 9m per week
  • Average ride time is based on Strava activity over the last 3 months. Give your reviews credibility by connecting your account.


  • Familiarity: I've put it through the wringer

Pretty simple to switch out. It can be difficult to pull the end caps off, it takes a little force to pop um off. Goes back together way easier.


  • Familiarity: I've used it several times

Needed to go with my hub. Works great.

I have a Giant P-XC 2 29er wheelset - I believe the rear hub is a DT Swiss 350 OE hub and would be compatible with this freewheel body, but can anyone confirm this will definitely work before I pull the trigger? TIA!

Yes, this will work just fine.

will this work on a Roval control carbon wheel?

Should be good to go - 99% sure those are DT 240 hubzzzz :)

this XD Drive fit on my sram X9 hub?

No, these are meant to be used for the DT Swiss series hubs.

Unanswered Question

I have a DT Swiss 350 Hub with X01 and the proper XD Driver already, however I'm looking to upgrade it to the 36 tooth star ratchet. I've found the conversion kit, but it cost more than this advertised price, just wondering if this hub is 18 or 36 tooth star ratchet, might just swap the entire hub, less fuss, less work, less money at this price?

My frame spacing is 150,My dt swiss 350...

My frame spacing is 150,My dt swiss 350 hub is 150,and the only freehub I can find is 12x142 . Do I use spacers to make up the 8mm difference?

Best Answer

The 150mm spacing is determined by your hubshell; the freehub body is the same standard for all spacings. Make sure you have a 12mm axle.

Will it work on the DT's 1600 wheels?

Will it work on the DT's 1600 wheels?

Best Answer

According to the DT Swiss manual ( , page 32) both the DT 1600 SPLINE 26" and 29" utilize the "Ratchet System" freehub body which would be interchangeable with this XX1 version. If you're wheelset is truly the "1600" then I would say this product would allow you to use the XX1 or X01 cassette on your current wheelset.

Does the job

  • Familiarity: I've used it several times

I recently upgraded my Yeti SB66 with XX1 and put this freehub body on my DT Swiss 1600 wheels. It worked perfectly. Cheaper and easier than a whole new wheelset.