DT Swiss RWS Aluminum Lever Thru Bolt $40.00
This RWS Thru Bolt w/Aluminum Lever is the latest version of DT's RWS technology. Where the standard RWS Thru Bolt uses a carbon reinforced plastic lever arm, you'll get a lever made from machined aluminum here. The weight is exactly the same, and you'll perhaps get more durability in the event of a crash with these alloy bits, not to mention the appeal of the more sculpted look.
RWS stands for Ratchet Wheelmounting System. It has the look of a quick release (minus the springs), but in place of a lever attached to a cam, there's a lever attached to a bolt head. Turn the lever clockwise to tighten. When there is sufficient resistance (15nm), stop turning. Press the red button to position the lever in a place where it won't get knocked around. You're done, and the benefits are pretty obvious. It provides up to 50% greater clamping force than with a conventional quick release, which can be a great thing when riding a disc brake in front as it will resist the twisting forces better. And, they make it super easy to pop your wheels off your bike. The oversized shafts are high-strength, light weight 7075 aluminum, as are the lever arms. Want it off? Just start turning the lever counter-clockwise to loosen.
The DT Swiss RWS Thru Bolt w/ Aluminum Lever is available to fit three hub configurations -- Front 9x100mm, Rear 10x135mm, Rear 12x142mm (Syntace X-12 type). The weights are as follows: 49g (front 9 x 100) 63g (rear 10 x 135.)
What community has to say
Stiff and easy to use
Wish this released years ago. A very simple and well executed idea. Increases stiffness, which is always a good thing. Arguably easier to use than QR. And you can position the lever at any angle, out of harm's way.
- Gender: Male
- Familiarity: I've put it through the wringer
The DT Swiss 10 mm Thru Bolt Skewer has been a great help in securing the rear wheel on my Santa Cruz Butcher frame compared to the old 10mm qr. The spring loaded mechanism is great! I am able to put the lever in exactly the position I want with very little effort and creates the correct bearing preload every time.
Great upgrade from Standard QR
- Gender: Male
- Familiarity: I've used it once or twice and have initial impressions
I got this because I went to the 135 x 10 on the rear wheel and this system is as easy if not easier than the standard qr. I was pretty surprised the difference in stiffness this upgrade has made from this one little bolt, make the change if you have an option with your current hub setup.