Out of Stock
Item # COP0059
This model is no longer in stock.
Don't worry though, we have a lot more Wheel Small Parts in stock than that.
CycleOps PowerTap Freehub Body $0.00
Thankfully, Cycleops got smarter when they moved on to their latest 15mm axle design found on the new PowerTap Pro+ and SL+ hubs. Now when you switch cassette bodies from the Shimano/SRAM spline to the Campagnolo spline body and vice versa, the operation is easy. Really easy. with no tools and no re-dishing.
Swapping is simple. Basically, grab the freehub body and pull it away from the hub shell. The axle end cap will snap off and fall to the ground and you'll have the body in one hand and shell in the other. If you can't grasp the freehub body tightly, reinstall the cassette, wrap it with a rag, and grab that instead. Once off, you install the other body. Once the ratcheting mechanism is snug inside the hub shell, press on the end cap until it firmly snaps into place. You're ready to go.
The kit, whether it has the Campagnolo freehub body or the Shimano/SRAM freehub body, comes with the appropriate freehub body and freehub seal. This freehub body is also compatible with the SLC+ hub, but does not include ceramic bearings. The claimed weight on the freehub body for the PT Pro+ and SL+ is 80g, though since you'll be replacing an 80g body with an 80g body, you should see neither an increase nor decrease in wheel weight.