Free Podium Mesh Base Layer With Louis Garneau Mondo Primo Jersey or Bibs »
$164.95

Item # CKG0063

Tell us your actual inseam

Note: Actual inseam is not the same as pant inseam.  How to measure

We recommend a size in this bike.

Your inseam: Edit More details

Our size calculator is a starting point for finding the right size for you. To get personal advice talk to one of our fit experts at 1.888.276.7130 or chat now

Select options
  • Select options
  • Black, 30mm ($164.95)
  • Red, 30mm ($164.95)
  • 100% Guaranteed Returns
  • Free Shipping on orders over $50

Item # CKG0063

Fill that hole with something nice.

It took a few years, but the aluminum wizards at Chris King finally graced us with a bottom bracket designed specifically for PressFit 30 bottom bracket shells. The PressFit 30mm bottom bracket ensures that your cranks will spin as freely as possible, thanks to King’s house-made steel ball bearings. And, if you haven’t yet adopted cranks with a 30mm spindle, there are adapter kits available to make the PressFit 30mm BB work with 24mm and 22/24mm crank spindles.

  • PressFit 30 BB shell compatibility
  • Chris King sealed bearings
  • Adapters available for standard cranksets

Tech Specs

Material:
[bearings] stainless steel, [cups] aluminum
Shell Type:
PF30
Shell Width:
68 mm 73 mm
Axle Type:
30mm
Actual Weight:
Red, 30mm: 108g
Recommended Use:
road and mountain biking
Manufacturer Warranty:
5 years

Size chart

Chris King

Bottom Bracket & Crank Compatibility Chart
Bottom Bracket & Shell Type→

↓ Crank Type ↓
Press Fit 30
68mm
Press Fit 30
73mm
Press Fit 24
86.5mm
Press Fit 24
89.5mm
Press Fit 24
92mm
English Threaded
68mm
English Threaded
73mm
English Threaded
83mm
English Threaded
100mm
PF30
Mountain or
Road
Chris King
Press Fit 30
Chris King
Press Fit 30
 
24mm Road
(e.g. Shimano, FSA, Rotor)
Chris King
Press Fit 30 &
Conversion
Kit #1
  Chris King
Press Fit 24
  Chris King
ThreadFit 24 &
Conversion
Kit #8
 
24mm Mountain
(e.g. Shimano, FSA, Rotor,
Race Face)
Chris King
Press Fit 30 &
Conversion
Kit #2
Chris King
Press Fit 30 &
Conversion
Kit #2
  Chris King
Press Fit 24
Chris King
Press Fit 24
Chris King
ThreadFit 24 &
Conversion
Kit #10
Chris King
ThreadFit 24 &
Conversion
Kit #12
Chris King
ThreadFit 24 &
Conversion
Kit #14
Chris King
ThreadFit 24 &
Conversion
Kit #16
24/22mm Road
(e.g. SRAM GXP, Bontrager GXP)
Chris King
Press Fit 30 &
Conversion
Kit #5
  Chris King
Press Fit 24 &
Conversion
Kit #7
  Chris King
ThreadFit 24 &
Conversion
Kit #9
 
24/22mm Mountain
(e.g. SRAM GXP, Bontrager GXP)
Chris King
Press Fit 30 &
Conversion
Kit #4
Chris King
Press Fit 30 &
Conversion
Kit #3
  Chris King
Press Fit 24 &
Conversion
Kit #6
Chris King
Press Fit 24 &
Conversion
Kit #6
Chris King
ThreadFit 24 &
Conversion
Kit #11
Chris King
ThreadFit 24 &
Conversion
Kit #13
Chris King
ThreadFit 24 &
Conversion
Kit #15
Chris King
ThreadFit 24 &
Conversion
Kit #17
24/22mm Tandem
(e.g. SRAM GXP, Bontrager GXP)
  Chris King
ThreadFit 24 &
Conversion
Kit #18
 
24/22mm Triple
(e.g. SRAM GXP, Bontrager GXP)
  Chris King
ThreadFit 24 &
Conversion
Kit #19
 
24mm BMX
(e.g. Shimano)
  Chris King
ThreadFit 24 &
Conversion
Kit #20
 

Reviews & Community

What do you think of the

Chris King PressFit 30mm

? Share a...

Write a review

No file chosen

Rather attach a photo from another website?

Rather attach a photo from your computer?

    Add a:
  • Share a photo
  • Share a video

Familiarity:

Only jpg, jpeg, png, gif or bmp files please.

Submit Cancel

Here's what others have to say...

Unanswered Question

Will this fit a 2013 S-Works Roubaix ? Using 2013 Shimano Ultegra crankset.

Will this fit the Cannondale Scalpel with the ID of 46mm?

Responded on

Yes - a 46mm shell id is the PF30 standard. You can check the PF30 manual at www.chrisking.com/support/instructions/

Will this fit the Merlin Extralight? I'm going to also be using a gxp crank (due to the power meter upgrade), what's the adapter I will need to purchase for this upgrade?

Thanks.

Responded on

Yes this will, you will need the following adapter: Chris King #4 for this bike.

5 5

Great investment

  • Familiarity: I've put it through the wringer

Purchased this BB for my Evo HM build. CK has made a great BB that really can be put through its paces. The added point to service the BB myself if I choose to buy the injector tool is a plus. I chose the standard, non ceramic as the gains are so minimal I saw no need to spend the extra money, which the savings could be passed along to get the injector if needed. Don't over analyze this possibility, just get it and be stoked your BB is top notch, with no sound or issues coming your way. Oh and made in USA! C'mon seriously, what's not to love about keeping a company making it's products stateside and not exporting.

Will this work with Campagnolo Super Record Ultra Torque? Or does it require an adaptor?

Best Answer Responded on

Gary, Traditional bottom brackets like this, regardless of size standard, do not work with Ultra Torque. Ultra Torque are essentially their own bottom bracket. If you want to use Campy in a BB30 or PF30 bottom bracket shell, you would use the BB30 or PF30 Ultra Torque adapters. The Ultra Torque cranks and adapters take the place of a bottom bracket like this one.

3 5

Hmm

  • Familiarity: I've put it through the wringer




The radius of the machining on the outer lip of one bearing cup (where the lettering is stamped )was very different than the other. One side had a rounded machined surface, the other bearing cup was flattened. I discussed it with Chris King, and they said this was not intentional. They supported a return and replacement. It does not present a structural issue, and is cosmetic only. BUT, for a bling company like King, a defect that is a cosmetic issue should not happen, and is not acceptable. I bet there are others out there that go unnoticed.

5 5

solid BB with easy install

  • Familiarity: I've put it through the wringer

running this PF30 on my Pin Dogma XC with conversion kit #2 for XT 2x crankset. installation was a breeze, even with internal cable routing. conversion kit is simple to fit. BB is silent with very smooth action. this is my first PF30 build, so not sure if alternatives at lower prices are a good option or not. i'm happy with this one for sure, and "if" it ever wears out, maybe i'll try another brand. hopefully i never have to find out.

Will this fit Niner Air 9 Carbon?

Will this fit Niner Air 9 Carbon?

Best Answer Responded on

Should fit fine (I built an Air 9 for my wife a couple of years back). You'll need a PF30/BB30 crankset, or if you want to use Shimano or another 24 mm spindle crank, you need an adapter. Or you can use one of the new PF30 bottom brackets that are designed for 24 mm cranks (Wheels Mfg and Hope make them, I think...).

Will this system work with a BB30 system...

Will this system work with a BB30 system of a Orbea Orca bike?

Best Answer Responded on

Should be good to go - I also have used this with BB30 - worked well :) I use a tiny amount of gasket sealer (goes on like grease, then turns into a rubberized seal after curing) between the BB shell and the BB adapter - works well.

Responded on

PF30 frames/BB shells have a diameter of 46. BB30 frames/BB shells have a diameter of 42.
PF30 bottom brackets won't fit on frames with BB30 bottom brackets requirements (Cannondale).
BB30 cranks will work with PF30 and BB30 bottom brackets.

5 5

Chris King Press Fit 30mm Bottom Bracket

  • Familiarity: I've put it through the wringer

You all know the quality of Chris King products, so do yourselfs a favor and drop in on this BB before you waste money on other BB's that you will replace in 4 months. I'm sure this BB will outlast me and my bike. Super bomber and no un-goldly noise. While your at it you might as well drop in on the Chris King bottom bracket grease injector to keep your new BB running smooth forever.

5 5

Chris King PressFit 30mm

  • Familiarity: I've put it through the wringer

Got tired of constantly replacing the SRAM Red PF30 in my C'dale SS EVO. Did the research and bought the King PF30 and used the appropriate loctite to install it into the frame (no, I'm not going to suggest which loctite to use as it will differ depending on your frame material - you'll have to do your own research).
End Result? Pure joy! BB is rock solid, smooth, and QUIET! I mean SILENT!Also, the King PF30 is SOOOOO much easier when installing/removing the crankset (i.e. no more rubber mallet needed to install/remove the BB spindle - sorry C'dale, but hammers and carbon fiber are not a good combo).
I've used King headsets and hubs for years, and so far, this BB is everything you would expect a King product to be. Worth every penny!
I would recommend picking up the King BB Grease Injector Tool if you Loctite the BB into your frame though.